1 / 23

4-4-2011

4-4-2011. Choosing a Buffer. Pick a buffer whose acid has a pK a near the pH that you want Must consider pH and capacity Buffer Capacity: Not all buffers resist changes in pH by the same extent. The effectiveness of a buffer to resist changes in pH is called the buffer capacity.

zarola
Télécharger la présentation

4-4-2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 4-4-2011

  2. Choosing a Buffer • Pick a buffer whose acid has a pKa near the pH that you want • Must consider pH and capacity Buffer Capacity: Not all buffers resist changes in pH by the same extent. The effectiveness of a buffer to resist changes in pH is called the buffer capacity. Buffer capacity is the measure of the ability of a buffer to absorb acid or base without significant change in pH.

  3. Buffer capacity increases as the concentration of acid and conjugate base increases. Larger volumes of buffer solutions have a larger buffer capacity than smaller volumes with the same concentration. Buffer solutions of higher concentrations have a larger buffer capacity than a buffer solution of the same volume with smaller concentrations. Buffers with weak acid/conjugate base ratio close to 1 have larger capacities

  4. Calculate the pH of a solution which is 0.40 M in acetic acid (HOAc) and 0.20 M in sodium acetate (NaOAc). Ka=1.7x10-5 HOAc H+ + OAc- Initial M: 0.40 0 0.20 Change -x +x +x Equil M:0.40-x x 0.20+x 0.20 >> x 1.7x10-5 = [H+][OAc-] = [x][0.20] x = [H+] = 3.4x10-5M [HOAc] [0.40] You should observe that 0.2>>x pH = - log 3.4x10-5 = 4.47

  5. HCOOH (aq) H+(aq) + HCOO-(aq) Initial (M) Change (M) Equilibrium (M) What is the pH of a solution containing 0.30 M HCOOH and 0.52 M HCOOK? 0.30 0.00 0.52 -x +x +x 0.30 - x x 0.52 + x 0.30 – x 0.30 0.52 + x 0.52

  6. Ka = {0.52 * x}/0.30 1.7*10-4 = 0.52*x/0.3 X = 9.4*10-5 Again 0.3 is really much greater than x X = [H+] = 9.4*10-5 M pH = 4.02

  7. Calculate the pH of a solution that is 0.025 mol/L HCN and 0.010 mol/L NaCN. (Ka of HCN = 4.9 x 10-10) HCN D H+ + CN- Even if you do not know it is a buffer you can still work it out easily:

  8. + - D (all in mol/L) HCN (aq) + H O (l) H O (aq) + CN (aq) 2 3 Initial conc. 0. 025 N/A 0. 0 0. 0 10 Ka = {x*(0.01+x)}/(0.025 – x), assume 0.01>>x However if you observe it is a buffer you could work it without including the “x” as it is always very small. 4.9X10-10 = {x*(0.01)}/(0.025) X = [H+] = 1.2*10-9 M, and pH = 8.91 Conc. change - x N/A +x +x Equil. conc. 0. 025 – x N/A +x 0.010 + x

  9. A diprotic acid, H2A, has Ka1 = 1.1*10-3 and Ka2 = 2.5*10-6. To make a buffer at pH = 5.8, which combination would you choose, H2A/HA- or HA-/A2-? What is the ratio between the two buffer components you chose that will give the required pH? The weak acid/conjugate base system should have a pKa as close to the required pH as possible. pKa1 = 2.96, while pKa2 = 5.6 It is clear that the second equilibrium should be used (HA-/A2-).

  10. The ratio between HA- and A2- can easily be found from the equilibrium constant expression where: HA-D H+ + A2- Ka2 = {[H+][A2-]}/[HA-] Ka2/[H+] = [A2-]/[HA-] [H+] = 10-5.8 = 1.6*10-6 M {2.5*10-6/1.6*10-6} = [A2-]/[HA-] [A2-]/[HA-] = 1.56

  11. NH4+(aq) H+(aq) + NH3(aq) Calculate the pH of the 0.30 M NH3/0.36 M NH4Cl buffer system. What is the pH after the addition of 20.0 mL of 0.050 M NaOH to 80.0 mL of the buffer solution? Kb = 1.8*10-5 First, get initial pH before addition of any base Ka = {[H+][NH3]}/[NH4+] (10-14/1.8*10-5) = {[H+] * 0.30}/0.36 [H+] = 6.7*10-10 pHinitial = 9.18

  12. NH4+(aq) H+(aq) + NH3(aq) Now calculate the pH after addition of the base: Addition of the base will decrease NH4+ and will increase NH3 by the same amount due to a 1:1 stoichiometry, which is always the case. mmol of NH4+= 0.36*80 – 0.05*20 = 27.8 mmol NH3 = 0.30*80 + 0.05 * 20 = 25 Can use mmoles instead of molarity, since both ammonia and ammonium are present in same solution

  13. NH4+(aq) H+(aq) + NH3(aq) Ka = {[H+][NH3]}/[NH4+] (10-14/1.8*10-5) = {[H+] * 25}/27.8 [H+] = 6.2*10-10 pHfinal = 9.21 DpH = pHfinal – pHinitial DpH = 9.21 – 9.18 = + 0.03

  14. A 0.10 M acetic / 0.10 M acetate mixture has a pH of 4.74 and is a buffer solution! What happens if we add 0.01 mol of NaOH (strong base) to 1.00 L of the acetic acid – acetate buffer solution? This reaction goes to completion since OH- is a strong base and keeps occurring until we run out of the limiting reagent OH- - - g mo les CH COOH (aq) + OH (aq) H O (l) + CH COO (aq) (all in ) 2 3 3 0.10 0. 10 Initial 0.01 N/A Change - x - x N/A + x Final 0.1 0 – x 0.10 + x (where x = 0.01 0.01 – x = N/A - = 0.09 = 0.11 due to limiting OH ) 0.00

  15. With the assumption that x is much smaller than 0.09 mol (an assumption we always need to check, after calculations are done!), we find + - H D (all in mol/L) CH COOH (aq) + H O (l) O (aq) + CH COO (aq) 3 2 3 3 Initial conc. 0. 09 0.0 0.1 1 N/A Conc. change - x N/A +x +x Equil. conc. 0. 09 – x N/A +x 0.1 1 + x pH = - log [H3O+] pH = - log 1.5 x 10-5 pH = 4.82

  16. What happens if we add 0.01 mol of HCl (strong acid) to 1.00 L of the acetic acid – acetate buffer solution? CH3COO- (aq) + H3O+ (aq)→H2O (l) + CH3COOH (aq) This reaction goes to completion and keeps occurring until we run out of the limiting reagent H3O+ New [CH3COOH] = 0.11 Mandnew[CH3COO-] = 0.09 M

  17. With the assumption that x is much smaller than 0.09 mol (an assumption we always need to check, after calculations are done!), we find + - D (all in mol/L) CH H O (aq) + CH (aq) COOH (aq) + H O (l) COO 3 2 3 3 Initial conc. 0.11 N/A 0.0 0. 09 Conc. change - x N/A +x +x Equil. conc. 0.11 – x N/ A +x 0. 09 + x Note we’ve made the assumption that x << 0.09 M! pH = - log [H3O+] pH = - log 2.2 x 10-5 pH = 4.66

  18. Calculate the pH of a 0.100 L buffer solution that is 0.25 mol/L in HF and 0.50 mol/L in NaF. + - D (all in mol/L) H F (aq) + H O (l) H O (aq) + F (aq) 2 3 Initial conc. 0.25 N/A 0.0 0. 5 0 Conc. change - x N/A +x +x Equil. conc. 0.25 – x N/A +x 0. 5 0 + x Assume 0.25>>x, which is always safe to assume for buffers

  19. [HF] [HF] + - = = 4 [H O ] K 3.5 x 10 3 a - - [F ] [F ] 0.25 - - = = 4 4 3.5 x 10 1.8 x 10 M 0.50 pH = - log [H3O+] pH = - log 1.8 x 10-4 pH = 3.76 No. mol HF = 0.25*0.1 = 0.025 No. mol F- = 0.50*0.1 = 0.050

  20. a) What is the change in pH on addition of 0.002 mol of HNO3? It is easier here to use moles not molarity + - [H O ][F ] ) (x)(0.048 - 4 = = = 3 K 3.5 x 10 a ) [HF] (0.027 - + mo les (all in ) F (aq) + H O (aq) H O (l) + H F (aq) g 2 3 0. 050 0. 025 Initial 0.0 0 2 N/A Change - x - x N/A + x Final 0. 0 50 – x 0. 0 25 + x (where x = 0.0 0 2 0.0 0 2 – x N/A + = 0. 0 48 = 0. 0 27 due to limiting H O ) = 0.00 3 Use moles: New HF = 0.027 molandnewF- = 0.048 mol + - D (all in mol/L) HF (aq) + H O (l) H O (aq) + F (aq) 2 3 Initial conc. 02 7 N/A 0.00 048 0. 0. Conc. change - x N/A +x +x Equil. conc. 02 7 – x N/A +x 048 + x 0. 0.

  21. [HF] 0.027 + - 4 - = = = 4 [H O ] K 3.5 x 10 x 10 M 2.0 3 a - [F ] 0.048 Notice we’ve made the assumption that x << 0.027 M. pH = - log [H3O+] pH = - log 2.0 x 10-4 pH = 3.71

  22. b) What is the change in pH on addition of 0.004 mol of KOH? - - mo les ) OH g H O (l) F (all in HF (aq) + (aq) + (aq) 2 025 0.004 0. 0.050 Initial N/A Change - x - x N/A + x (where x = 0.0 4 025 – x Final 0. 0.050 + x 0.04 – x N/A - = 0. 021 = 0. 054 due to limiting OH ) = 0.00 Use moles: New HF = 0.021 molandnewF- = 0.054 mol + - - (aq) D (all in mol/L) HF (aq) + H2O (l) H F O (aq) + 3 Initial conc. 0.021 N/A 0.00 0.054 Conc. change - x N/A +x +x Equil. conc. 0.021 – x N/A +x 0.054 + x + - ) [H O ][F ] (x)(0.054 - 4 - = = 4 3 = K 3.5x10 so 3.5x10 a [HF] (0.021 )

  23. [HF] 0.21 x - 4 + - = = = 4 [H O ] K 3.5 x 10 1.4 M 10 3 a - [F ] 0.54 Notice we’ve made the assumption that x << 0.21 M. We should check this! pH = - log [H3O+] pH = - log 1.4 x 10-4 pH = 3.87

More Related