1 / 12

Can we re-use existing magnets to build a 350(450) keV beam line?

Can we re-use existing magnets to build a 350(450) keV beam line?. 15 deg dipole. DS Y-Chamber Bend Magnet. “DS” magnet is cosine -theta design to provide uniform current density (pure dipole field) from windings (no iron). 32709-C-0358. Spare (DS002?). First Design (DS001?).

zilya
Télécharger la présentation

Can we re-use existing magnets to build a 350(450) keV beam line?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Can we re-use existing magnets to build a 350(450) keV beam line?

  2. 15 deg dipole

  3. DS Y-Chamber Bend Magnet “DS” magnet is cosine-theta design to provide uniform current density (pure dipole field) from windings (no iron). 32709-C-0358 Spare (DS002?) First Design (DS001?) CEBAF (DS003) Test Cave (DS004)

  4. DS Operational Values Ampacity = Current wire can reasonably carry Cooling = Rule of Jay, 5 A/mm2 (but, might be too warm near gun) • DS002: Test temperature and voltage to 6A • DS005: Propose new set of windings using AWG16 on DS001 fixture

  5. Solenoids Focal length half of solenoid spacing (=1.5m): Spin rotation can be chosen independently: g = 2.002319304361(53)

  6. Single Coil = Single Wound = SW

  7. Two Coils = Counter Wound = CW Note: Only enough shells to build 5 solenoids Found spare FD (chopping aperture) coils and what looks to be another FA for chopping cavity (red)

  8. Solenoid Operational Values • FH: Should work at 3A. Test for saturation. Pick new limit. Remap. • FB: Should work fine. Work horse magnet. • FA: Have many, but less turns & center plate more likely to saturate • FQ: Have 4, can assemble more. Test/model for saturation. Pick new limit. Remap.

  9. CEBAF Wien Filter Spin precesses about B-field: Lorentz force is zero when:

  10. Operational Values • Build 3rd Wien filter like the others provides 30-40 deg of spin rotation • Using 35 deg allows Pz = (0.82-1)P and Px = (0-0.57)P. • Testing for higher B field (temp, saturation) and E field (gradient) possible.

  11. Spectrometer Assuming beam width 3mm and spectrometer arm 1m a 35 deg bend achieves 0.5% momentum resolution Angle >35 deg • We need a iron core dipole which provides 1700 G-cm • “Red” dipoles provide e.g. >4000 G-cm/A

  12. Summary 15 DEG BEND • DS002: Test temperature and voltage up to 5-6A • DS005: Propose new set of windings using AWG16 on DS001 fixture SOLENOIDS • FH: Should work at 3A. Test for saturation. Pick new limit. Remap. • FB: Should work fine. Work horse magnet. • FA: Have many, but less turns & center plate more likely to saturate • FQ: Have 4, can assemble more. Test/model for saturation. Pick new limit. Remap. WIEN FILTER • Build 3rd Wien filter like the others provides 30-40 deg of spin rotation • Assuming 35 deg provides Pz = (0.82-1)P and Px = (0-0.57)P. • Testing for higher B field (temp, saturation) and E field (gradient) possible. SPECTROMETER • We need a iron core dipole which provides 1700 G-cm • “Red” dipoles provide e.g. >4000 G-cm/A

More Related