html5-img
1 / 24

University Physics: Mechanics

University Physics: Mechanics. Ch6. Friction , Drag, and Centripetal Force. Lecture 10. Dr.-Ing. Erwin Sitompul. http://zitompul.wordpress.com. 2012. Homework 8: Coin On A Book.

zofia
Télécharger la présentation

University Physics: Mechanics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. University Physics: Mechanics Ch6. Friction, Drag, and Centripetal Force Lecture 10 Dr.-Ing. Erwin Sitompul http://zitompul.wordpress.com 2012

  2. Homework 8: Coin On A Book The figure below shows a coin of mass m at rest on a book that has been tilted at an angle θ with the horizontal. By experimenting, you find that when θ is increased to 13°, the coin is on the verge of sliding down the book, which means that even a slight increase beyond 13° produces sliding. What is the coefficient of static friction μs between the coin and the book? Hint: Draw the free-body diagram of the coin first.

  3. Solution of Homework 8: Coin On A Book Forces along the y axis: • Why zero? Forces along the x axis: • Why zero? So, the coefficient of static friction is:

  4. Virtual Experiment: Determining μk 18 m θ An object is kept in rest on an inclined surface. The angle θis 26°, which is greater than the critical angle θc (μs = tanθc). Upon release, the object directly move and slide down to the bottom. It requires 4.29 s to reach the bottom, which is 18 m away from the initial point. Determine the coefficient of kinetic friction μkbetween the object and the surface.

  5. Example: Blue Block → A block of mass m = 3 kg slides along a floor while a force F of magnitude 12 N is applied to it at an upward angle θ. The coefficient of kinetic friction between the block and the floor is μk = 0.4. We can vary θ from 0 to 90° (with the block remains on the floor. What θ gives the maximum value of the block’s acceleration magnitude a?

  6. Example: Blue Block Forces along the y axis: Forces along the x axis: • What θ gives the maximum value of a? • da/dθ = 0

  7. Example: Blue Block If a is given by then, the derivative of a with respect to θ is

  8. Example: Two Blocks Block B in the figure below weighs 711 N. The coefficient of static friction between block and table is 0.25; angle θ is 30°. Assume that the cord between B and the knot is horizontal. Find the maximum weight of block A for which the system will be stationary.

  9. Example: Two Blocks → → → → → → → → → → → → → fs,max fs,max TW FgB FNB FgA TB TW FgA TA TW TB TA Wall Knot Block A Block B Knot

  10. Example: Two Blocks → → → fs,max TW FgA Forces along the y axis: TWy θ TWx Knot Forces along the x axis:

  11. Example: Multiple Objects A block of mass m1 on a rough, horizontal surface is connected to a ball of mass m2 by a lightweight cord over a lightweight, frictionless pulley as shown in the figure below. A force of magnitude F at an angle θwith the horizontal is applied to the block as shown and the block slides to the right. The coefficient of kinetic friction between the block and surface is μk. Find the magnitude of acceleration of the two objects.

  12. Example: Multiple Objects → → → → → → → fk FN Fg2 F T T Fg1 Fy θ Fx m1 Forces in m1 Forces in m2 m2

  13. Example: Multiple Objects

  14. Example: Trio Blocks When the three blocks in the figure below are released from rest, they accelerate with a magnitude of 0.5 m/s2. Block 1 has mass M, block 2 has 2M, and block 3 has 2M. What is the coefficient of kinetic friction between block 2 and the table?

  15. → → → → → → → → → fk T1 T1 Fg1 Fg2 FN T2 T2 Fg3 Example: Trio Blocks a Forces in m1 Forces in m2 a a Forces in m3 m1 m2 m3

  16. Example: Trio Blocks

  17. The Drag Force and Terminal Speed • A fluid is anything that can flow – generally a gas or a liquid. • When there is a relative velocity between a fluid and a body (either because the body moves through the fluid or because the fluid moves past the body), the body experiences a drag forceD that opposes the relative motion. → • Here we examine only cases in which air is the fluid, the body is blunt rather than slender, and the relative motion is fast enough so that the air becomes turbulent (breaks up into swirls) behind the body. • In such cases, the magnitude of the drag force is related to the relative speed by an experimentally determined drag coefficient C according to ρ: air specific density A : effective cross-sectional area of the body C : drag coefficient

  18. The Drag Force and Terminal Speed

  19. The Drag Force and Terminal Speed • When a blunt body falls from rest through air, the drag force D is directed upward. This upward force D opposes the downward gravitational force Fg on the body. → → • If the body falls long enough, D eventually equals Fg. This means that a = 0, and so the body’s speed no longer increases. The body then falls at a constant speed, called the terminal speed vt.

  20. The Drag Force and Terminal Speed • Cyclists and downhill speed skiers try to maximize terminal speeds by reducing effective cross-sectional area

  21. Example: Falling Cat If a falling cat reaches a first terminal speed of 97 km/h while it is wrapped up and then stretches out, doubling A, how fast is it falling when it reaches a new terminal speed

  22. Example: Raindrop A raindrop with radius R=1.5 mm falls from a cloud that is at height h=1200 m above the ground. The drag coefficient C for the drop is 0.6. Assume that the drop is spherical throughout its fall. The density of water ρw is 1000 kg/m3, and the density of air ρa is 1.2 kg/m3. What is the terminal speed of the drop? What would be the drop’s speed just before impact if there were no drag force? (a) (b)

  23. Homework 9A • In the next figure, blocks A and B have weights of 44 N and 22 N, respectively. • Determine the minimum weight of block C to keep A from sliding if μs, between A and the table is 0.20. • Block C suddenly is lifted off A. What is the acceleration of block A if μk between A and the table is 0.15?

  24. Homework 9B • The figure shows a 1.0-kg University Physics book connected to a 500-g tea mug. The book is pushed up the slope and reach a speed of 3.0 m/s before being released. The coefficients of friction are μs = 0.50 and μk = 0.20. • How far will the book slide upwards? • After the book reaches the highest point, will the book stick to the surface, or will it slide back down? In downhill speed skiing, a skier is retarded by both the air drag force on the body and the kinetic frictional force on the skis. Suppose the slope angle is θ = 40.0°, the snow is dry with a coefficient of kinetic friction μk = 0.04, the mass of the skier and equipment is m = 85.0 kg, the cross-sectional area of the (tucked) skier is A = 1.30 m2, the drag coefficient is C = 0.150, and the air density is 1.20 kg/m3. (a) What is the terminal speed? (b) If a skier can vary C by a slight amount dC by adjusting, say, the hand positions, what is the corresponding variation in the terminal speed? D fk

More Related