1 / 21

Homemade Gold Panning Machine

Building your own gold panning equipment can be a great way for beginners and advanced users alike to learn all about how gold works and it carries it

alefiverr
Télécharger la présentation

Homemade Gold Panning Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Homemade Gold Panning Machine

  2. Building your own gold panning equipment can be a great way for beginners and advanced users alike to learn all about how gold works and it carries it’s financial advantages as well

  3. You can build the same equipment used to pan for literally hundreds of dollars less than what you would pay for at a specialty shop

  4. The materials needed to build your own homemade gold panning machine can all be found at your local hardware store, usually

  5. 1. Getting a panning tub should be relatively easy, any moderately-sized tub can be used Hardware stores carry various heavy plastic containers for cheap

  6. 2. Putting together a sluice box will require long pieces of metal for proper water flow Constructing a sluice box out of wood is not recommended as they are much more cumbersome and heavy after absorbing water from the stream

  7. You can jerry-rig an air conditioning duct for the perfect length and width

  8. Then, you will need to find a metal mesh to act as a trap on the bottom

  9. Alternatively, you can place a piece of carpet or buy “miner’s moss” that will catch very fine gold deposits that would normally be washed away

  10. Lastly, you will need to create metal dividers, or riffles, for the water to flow over at the proper levels

  11. The water should be no more than an inch deep when placed in a stream, so the depth of the box does not have to be more than 2-3 inches

  12. It is recommended that your riffles are easy to remove for cleanup

  13. You can simply install thin plates of metal held by rails on the inside of the box that are held in place by a few bolts that can be unscrewed at the end of your panning

  14. 3. You’re going to want to build a gold rocker for your homemade gold panning machine as well if you want to cover areas further away from the stream where there is lower water levels

  15. These rockers shift back and forth and sort out the gold for prospectors. They usually are no bigger than 4ft long and sit on the beginning portion of your sluice box, mounted using half-circle pieces of wood

  16. A screen is placed on one end and water is poured from the opening at the top

  17. The design is fairly simple, gravity and inertia take care of the work for you

  18. When looking at designs for building your homemade gold panning machine, simpler is better

  19. The best commercially built gold panning equipment follow a basic design and are subsequently easier to maintain

  20. Time is money and building a reliable homemade gold panning machine will give you lots of that and of course, gold !

  21. If you are watching the video version of this presentation on making a homemade gold panning machine, please click the link below the video to learn more

More Related