1 / 12

Manual Contractors And Disconnect Switches | Authorized Parts Inc

AC and AC-DC switches provide dependable manual motor control when overload protection is provided separately or not required. Switches are Ruggedly built and designed for dependability, Cooper Wiring Devices single-phase and three-phase switches provide trouble-free performance wherever manual motor control is required. Contact-us :- Authorized Parts Inc., 280 Suburban Ave, Deer Park NY 11729, Tel No :- (631) 242 2498, E-mail Id :- info@authorizecparts.com, Website :- http://www.authorizedparts.com/

authorizedpart
Télécharger la présentation

Manual Contractors And Disconnect Switches | Authorized Parts Inc

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. U L ı C O M M E R C I A L I N D U S T R I A L INSTITUTIONAL C S A ı N E M A Manual Contactors and Disconnect Switches Rugged design and superior performance for equipment control and safety. 2

  2. M A N C O N TA C T O RS U L ı C O M M E R C I A L I N D U S T R I A L I N S T I T U T I O N A L U A L Our AC and AC-DC switches provide dependable manual motor control when overload protection is provided separately or not required. C S A ı N E M A Switches Ruggedly built and designed for dependability, Cooper Wiring Devices single-phase and three-phase switches provide trouble-free performance wherever manual motor control is required. Two-position AC switches are available in 20, 30, 40 and 60 amp ratings, and three-position AC-DC switches with a positive-stop center “off” position are rated at 5, 10, 20 and 30 amps. Manual Contactors (Enclosure with switch) We produce switch and enclosure combinations to suit a wide variety of indoor and outdoor applications. When assembled in our type 3R enclosures, Cooper Wiring Devices’ switches are particularly well suited for use with commercial HVAC equipment in outdoor settings. All Cooper Wiring Devices’ switches and manual contactors are direct beneficiaries of the century- long Arrow Hart tradition of unsurpassed quality. Applications I Workshop bench equipment I Commercial & industrial exhaust fans I High volume air conditioning systems I Factory and shop machine tools and welders I Conveyor systems I Processing systems I Industrial fans and pumps I Air compressors Contactor Switches Manual Contactors in Enclosures Toggle Switch 2

  3. Proven design and innovative features make our switches easy to install and operate. FEATURES AND BENEFITS I Compact design provides extra wiring room for easy, fast installation. I Robust, single-piece, moveable and stationary contact arms with large silver-cadmium buttons limit heat build-up for excellent continuity and long life. I Easy-to-read electrical ratings on rugged steel mounting straps ensure accurate identification. I Screw and clamp or box lug terminals to meet individual project requirements. I Highly visible “ON/OFF” markings on large, rugged toggles make the switch easy to operate and reduce the risk of errors. CERTIFICATIONS AND COMPLIANCES I Cam and roll design provides dependable, trouble-free switch action. UL 508 — Industrial Control Equipment CSA Certified to C22.2 No. 14 — Industrial Control Equipment I Distinct wire pockets and thick-wall arc barriers prevent strands from straying. Switch Ordering Information Two-Position Switches Maintained Contact, Single Throw Max.AWG Wire Size 10 10 10 8 w/ring terminal 8 4 4 10 8 4 4 Horsepower Rating 240 V/AC 3 3 5 5 Poles 2 2 2 Amperage 20 30 30 Voltage 600 V/AC 250 V/AC 600 V/AC Termination Style Back & side wired screw Back & side wired screw Front wired screw 120 V/AC 2 2 2 480 V/AC 5 5 7.5 600 V/AC 7.5 7.5 7.5 Catalog No. AH6808UDAC AH6808UDAC AH6810U1 SINGLE PHASE AH6808UCO 2 40 600 V/AC Back & side wired screw AHMC240C1 AHMC240L AHMC260L AH7810UD1,2 AHMC340C1 AHMC340L AHMC360L 2 2 2 3 3 3 3 40 40 60 30 40 40 60 600 V/AC 600 V/AC 600 V/AC 600 V/AC 600 V/AC 600 V/AC 600 V/AC Side wired screw & clamp Side wired box lug Side wired box lug Front wired screw Side wired screw & clamp Side wired box lug Side wired box lug 3 3 3 3 3 3 5 5 5 5 15 15 15 15 15 15 25 15 15 15 15 20 20 30 7.5 7.5 7.5 10 THREE PHASE 1Supplied with Robertson screws when ordered in Canada. 2In Canada, order Catalog No.AH7810U. Three-Position Switches Maintained Contact, Double Throw Horsepower Rating AC-DC 250 V Max.AWG Wire Size AC DC Poles Amperage Voltage Termination Style 240 V/AC 250 V Catalog No. 5 600 V/AC 250 V/AC/DC 125 V/AC/DC DPDT 10 20 Side wired screw 10 2 1.5 AH4361 SINGLE PHASE 20 30 250 V/AC/DC 125 V/AC/DC Side wired screw 10 2 AH4371 DPDT 3

  4. M A N C O N TA C T O R S U L ı C O M M E R C I A L I N D U S T R I A L I N S T I T U T I O N A L U A L Cooper Wiring Devices builds manual contactors to meet the demands of a variety of indoor and outdoor environments. C S A ı N E M A CERTIFICATIONS AND COMPLIANCES FEATURES AND BENEFITS UL 508 — Industrial Control Equipment I Totally enclosed body eliminates exposed contacts. I Enclosures can be padlocked to conform to OSHA lockout requirements. CSA Certified to C22.2 No. 14 — Industrial Control Equipment I Cam and roll design provides dependable, trouble- free switch action. I Double-break, silver-alloy, butt-type contacts provide long life. I Separate arc-quenching chambers isolate each pole. I Front terminals are designed for easy wiring. Manual Contactor Catalog No. Ordering Information Switch Only Enclosures With Switch Enclosure Only Type 1, Double Gang (see ratings on previous page) Type 1, Type 3R AH6808WDAC3 AH6810W4 Type 1, Single Gang AHN1GD AHN1GD Type 1 Double Gang Deep Type 3R * AHN3WD AH6808UDAC AH6810U AH6808UCO5 AHMC240C AHMC240L AHMC260L AH7810UD AHMC340C AHMC340L AHMC360L AH4361 AH43717 AH6808GDAC AH6810G AHMC240C-1 AHMC240L-1 AHMC260L-1 AH7810GD6 AHMC340C-1 AHMC340L-1 AHMC360L-1 AH27940G AHMC240C-3 AHMC240L-3 AHMC260L-3 AH7810WD AHMC340C-3 AHMC340L-3 AHMC360L-3 AHN1GD2 AHN1GD2 AHN3WD AHN3WD AHN3WD AHN3WD AHN3WD AHN3WD AHN3WD AHN1GD2D AHN1GD AHN1GD2 AHN1GD2 AHN1GD2D ** 3AH6808WDAC includes a copper-free aluminum back box and cover. 4In Canada, order Catalog No.AH6810WR. 5AH6808UCO may be installed in a N1GD Type 1 or N3WD Type 3R enclosure. 6Add suffix B to Catalog No. for larger enclosure. Order AH7810GDB for AHN1GD2 enclosure. See dimensions for enclosures on next page. 7AH4371 does not fit standard enclosure due to length of switch (see dimensions on next page), normally panel mounted. * Crouse-Hinds FSC2-SA box and DS185 cover. **Enclosure only not available. Type 3, 7 & 9 For Hazardous Locations8 Class I, Div. 1 & 2, Groups C, D Class II, Groups E, F, G – AH6810E AH7810ED Switch Only Switch With Cover Plate For Flush Mounting AH6808FDAC AH6810F AH7810FD (see ratings on previous page) AH6808UDAC AH6810U AH7810UD 8Type 3, 7 & 9 enclosure includes back box of iron with galvanized and acrylic paint finish. Cover is copper-free aluminum. 4

  5. Dimensional Data (in inches and mm) SWITCHES Tap #6/32" (4.76mm) 1.66" 1.74" (42.16mm) (44.20mm) .06" (1.52mm) (2).22 Dia. (5.59mm) 3.81" (96.77mm) 3.28" Mtg. Holes (83.31mm) OFF 3.28" (83.31mm) 2.38" 2.31" OFF 2.31" 3.75" (95.25mm) (60.45mm) (58.67mm) 2.38" (58.67mm) (60.45mm) ON (2)#6/32"Tap (4.76mm) Box Lugs Accept 1.75" 1.69" #4-#14 Wire (44.45mm) (42.93mm) AHMC240L, AHMC340L, AHMC260L, AHMC360L AH6810U, AH7810UD (2) .20" (5.08mm) 1.66" 2.23" (42.16mm) (56.64mm) Holes .06" (1.5mm) 3.28" (2).22" Dia. (5.59mm) (83.31mm) D 3.28" 2.22" Mtg. Holes 2.38" (83.31mm) (56.39mm) 3.28" 3.78" (60.45mm) ON 4.06" (103.12mm) 3.75" (95.25mm) (83.31mm) (96.01mm) OFF 2.31" 2.38" (58.67mm) (60.45mm) ON C B A 1.38" 1.31" 1.04" (2)#6/32 Tap Clamps Accept #8-#14 Wire A B C D (35.05mm) (33.27mm) (26.42mm) 1.59” (40.39mm) (42.16mm) (16.76mm) (63.50mm) 1.81” 1.98” (45.97mm) (50.29mm) (30.99mm) (73.15mm) 1.66” .66” 2.50” AH4361 AH6808UDAC, AH6808UCO AHMC240C, AHMC340C 1.22” 2.88” AH4371 ENCLOSURES 2.63" 1.38"(35.05mm) 1/2" (12.70mm) Conduit KO Centered on Back (66.80mm) .75" Hub (19.05mm) 4.25" (108.00mm) 3.00" OFF (76.20mm) 6.75" Ground Screw (171.45mm) MANUAL MOTOR STARTER 5.88" 2.50" (149.35mm) (63.5mm) 2.92" 2.63" (66.80mm) (74.17mm) (3).25" (6.35mm) Dia. Hole Shroud Accepts up to 5/16" (7.94mm) Dia. Lock Shank 3.50" 4.75" (120.65mm) (88.90mm) .34" AH27940G, AHN1GD (8.64mm) AH6810E, AH7810ED 2.75" .75" Hub (19.05mm) (19.05-25.40mm) Knockouts for .75 - 1.00 (69.85mm) Conduit (5 Plc.'s) (3).25 (6.35mm) Mtg. Hole 2.00" (50.80mm) 5.81" 4.50" ON OFF 1.50" (38.10mm) (147.57mm) 2.31" 4.42" 4.25" (107.95mm) OFF OFF (114.30mm) (58.674mm) (112.27mm) 1.37" (34.80mm) C MANUAL MOTOR CONTROLLER #14-#4 Ground Lug 'A' .19" 4.67" (4.83mm) (118.62mm) 2.75" 3.43" Shroud Accepts up to 5/16" Dia. (7.94mm) Lock Shank 1.68" (69.85mm) (87.12mm) (42.67mm) AH6808WDAC AH7810GDB, AHN1GD2 AHN1GD2D Dim A=2.63 (66.80mm) Dim A=3.87 (98.30mm) AH6808FDAC (plate only, no toggle guard) AH6810F, AH7810FD 6.00" 6.00" (152.40mm) 6.00" 3.00" 3.00" (76.2mm) 3.00" ON ON ON (152.40mm) (152.40mm) (76.2mm) (76.2mm) F F F MANUAL MOTOR CONTROLLER MANUAL MOTOR CONTROLLER MANUAL MOTOR CONTROLLER 1.50" (38.10mm) (38.10mm) (63.50 mm) 1.50" 1.50" (38.10mm) 2.50" (63.50 mm) mm) 2.50" (63.50 2.50" 4.50" 4.50" (114.30mm) 4.50" (114.30mm) (114.30mm) 4.00" 4.00" (101.60mm) 4.00" (2).25" (6.35mm) Dia. Embossed Mtg. Hole Embossed Mtg. Hole Embossed Mtg. Hole (2).25" (6.35mm) Dia. (2).25" (6.35mm) Dia. (101.60mm) (101.60mm) AHN3WD 5

  6. M A N C O N TA C T O R S U L ı C O M M E R C I A L I N D U S T R I A L I N S T I T U T I O N A L U A L Individual Product Features C S A ı N E M A MANUAL CONTACTOR SWITCHES AHMC 40 and 60 Series I 2 pole and 3 pole, 40 and 60 amp 600 V/AC. I Most compact switch available. I High impact-resistant, glass-filled nylon construction. I 40 amp available with screw and clamp or box lug terminations. I 60 amp available with box lug terminations. I Captive termination screws. I Two sets of contacts per pole distribute load and make/break action for long, reliable duty. AH6808UDAC, AH6808UCO I 2 pole, 20, 30 and 40 amp 600 V/AC. I Very compact. I Back and side-wire, spring-loaded screw terminations. I Fits all standard wallplates and covers. I Wraparound fiber terminal shield provides additional insulation when installed in single-gang boxes. I High impact-resistant thermoplastic lever. AH6810U, AH7810UD I 2 pole and 3 pole, 30 amp 600 V/AC. I Front-wire screw termination. I Termination screws are removable for use with ring terminal. I Heavy duty brass contact arms with large silver buttons. I Two sets of contacts per pole distribute load and make/break action for long, reliable duty. AH4361/AH4371 I 2 pole, 5 amp 600 V/AC, 10, 20 and 30 amp 125-250 V/AC/DC. I Three-position, double throw, maintained contact. I Positive stop in center “off” position for motor-reversing and speed-control applications. I Lever cannot be moved from one position to other side without first stopping in the center “off” position. I Heavy duty copper contacts and brass terminals. I Quick-make/quick-break actuation – rated AC and DC. 6

  7. SWITCHED ENCLOSURES I Enclosures can be padlocked in conformance to OSHA lockout requirements. I Thick steel 0.060" (1.52mm) construction with gray, baked enamel finish. I Knockouts: – Type 1 enclosure – 0.500" (12.70mm), 0.750" (19.05mm) concentric knockout top and bottom. – Type 3R enclosure – two 0.500" (12.70mm), 0.750" (19.05mm), 1.0" (25.40mm) concentric knockouts on bottom. I Screw-style ground terminal in Type 1 single gang takes up to a #10-14 AWG wire.All other enclosures include lug-style ground terminal which accommodates #4-14 AWG wire. I AH6808WDAC includes a copper-free aluminum back box and cover. I Type 3, 7 & 9 enclosure includes back box of iron with galvanized and acrylic paint finish. Cover is copper-free aluminum. Standard Materials for Switches and Enclosures Item Switch Model Catalog No. AH6808UDAC, AH6808UCO Plated steel Thermoplastic Urea thermoset Urea thermoset Brass with silver- cadmium buttons — Brass Steel Cold-rolled steel with polyester urethane finish AH6810U, AH7810UD Plated steel Glass-filled nylon Urea thermoset Urea thermoset Brass with silver- cadmium buttons — Brass — Cold-rolled steel with polyester urethane finish Cold-rolled steel with polyester urethane finish Iron-alloy cast body with electrogalvanized and aluminum acrylic paint; Copper-free aluminum cast cover AHMC Series Plated steel Glass-filled nylon Glass-filled nylon Glass-filled nylon Brass with silver- cadmium buttons Brass with steel screw Nickel-plated brass Brass Cold-rolled steel with polyester urethane finish Cold-rolled steel with polyester urethane finish AH4361, AH4371 Plated steel Thermoplastic Thermoset plastic Thermoset plastic Copper Mounting Strap Toggle Base Cover Contacts Box Lug Terminal Screw Terminal Clamp Type 1 Enclosure — Brass — Cold-rolled steel with polyester urethane finish Type 3R Enclosure Die-cast aluminum — Type 3, 7 & 9 Enclosure — — — Cover Plates For Flush Mounting Stainless steel Painted gray steel — — 7

  8. N O N - F U S E D M A N DISCONNECTS U L ı I N D U S T R I A L I N S T I T U T I O N A L U A L Non-fused Switches: Compact and durable, Cooper Wiring Devices non-fused switches are the answer for safe motor load disconnects. C S A ı N E M A Applications I Manufacturing equipment in factories I Agricultural facilities and food processing I Automotive garages I Assembly plants I Maritime applications I Processing plants Our 30 and 60 amp 600 V/AC non-fused manual disconnect switches combine a horsepower-rated switch in a durable, watertight NEMA 3R, 4X, 12 enclosure. They meet all applicable OSHA and NEC requirements for Lockout/Tagout control of directly wired, high-wattage equipment where overload protection is not required.All are built to the highest industry standards. Accessories Switch Amperage Description Catalog No. 30 60 30 60 Auxiliary Contacts 1 NO, 1 NC, 6A 250V Auxiliary Contacts 1 NO, 1 NC, 6A 250V Replacement switch Replacement switch Replacement mounting feet kit AH30AUXB AH60AUXB AHBRS30ANF AHBRS60ANF AHMSF 30 & 60 B C Dimensional Data (in inches and mm) Enclosure Type 30 Amp A B C D 6.688” (169.86mm) 10.188” (258.76mm) 4.625” (117.48mm) 6.313” (160.34mm) 3.813” (96.84mm) 5” (127.00mm) 5.375” (136.55mm) 6.688” (169.86mm) A 60 & 100 Amp D AH30/60 6/15/95 Non-fused Manual Disconnect Catalog No. Ordering Information Maximum Horsepower Rating–Voltage Single Phase Three Phase Amps* 120V 200V 240V 200V 208V 240V 480V 600V Auxiliary Contacts Without Aux. Contacts With Aux. Contacts Without Aux. Contacts With Aux. Contacts With Aux. Contacts Catalog No. AH30MS1B AH30MS1B-M2 AH60MS2B AH60MS2B-M2 AH100MS2-M2 30 2 5 5 10 10 10 20 30 60 3 7.5 10 15 15 20 40 50 100 25 50 50 * Note: The 30 amp switch is tested and approved at 40 amps,the 60 amp switch is tested and approved at 80 amps. See ratings inside enclosure or contact factory.Valox®is a registered trademark of General Electric,USA.Hubs not included. 8

  9. Rugged construction meets OSHA, NEC and NEMA safety requirements. FEATURES AND BENEFITS CERTIFICATIONS AND COMPLIANCES UL 508 — Industrial Control Equipment CSA Certified to C22.2 No. 14 — Industrial Control Equipment NEMA — Type 3R, 4X, 12 I Meets NEC Article 430 requirements for a separate disconnect switch within sight of all motor loads. I Enclosures rated NEMA 3R, 4X, 12 for reliable performance in outdoor, washdown, corrosive and dusty applications. I Formed-in-place continuous gasket ensures full perimeter sealing. I Gasketed switch handle maintains NEMA 4X rating. I Captive cover mounting screws will not fall out during assembly and are corrosion resistant (60 amp, non-metallic; 30 amp, stainless steel). I Adjustable mounting feet included for flexible positioning options. I Auxiliary contacts available for PLC signaling. SHORT CIRCUIT RATING 30 amp switch: 10 kA, 600 V/AC maximum when protected by 80 amp class RK5 fuses. 60 amp switch: 10 kA, 600 V/AC maximum when protected by 110 amp class RK5 fuses. 100 amp switch: 10kA, 600 V/AC maximum when protected by 250 amp RK1 fuses. Removable DIN rail mounting switch allows easy wiring. Large, clearly marked rotary handle provides a good grip, even for a gloved hand. Lockable nylon handle complies with OSHA Lockout/Tagout requirements. Valox® thermoplastic enclosure provides high impact strength and excellent corrosion resistance. 9

  10. FUSED MANUAL DISCONNECTS U L ı I N D U S T R I A L I N S T I T U T I O N A L Fused Switches: Heavy duty, horse- power-rated disconnect switches in a watertight enclosure provides fused switch control of directly wired loads. C S A ı N E M A Applications I Manufacturing equipment in factories I Agricultural facilities and food processing I Automotive garages I Assembly plants I Maritime applications I Processing plants Our 30 amp 600 V/AC fused manual disconnect switches combine a horsepower-rated switch in a durable, watertight NEMA 3R, 4X, 12 enclosure. They meet all applicable OSHA and NEC requirements for Lockout/ Tagout control of directly wired, high-wattage equipment with overload protection. Accessories Description Auxiliary Contacts 1 NO, 1 NC Replacement Switch Replacement Mounting Feet Kit Trunk Latch Kit Catalog No. AH30AUXF AHBRS30AF AHMSF AHNTL01 Dimensional Data (in inches and mm) 83/8" (212.73mm) 71/2" (190.50mm) 83/8" (212.73mm) ON OFF 101/2" (266.70mm) 91/16" (230.19mm) Fused Manual Disconnect Catalog No. Ordering Information Maximum Horsepower Rating Voltage AC 200V 208V Fuse Auxiliary 600V Amps 3 Phase 110V 240V 480V Type Catalog No. Contacts Without Auxiliary Contacts With Auxiliary Contacts 30 Standard Maximum 1.5 3 3 7.5 5 15 7.5 20 J J AH30MS2F 5 7.5 30 Standard Maximum 1.5 3 3 7.5 5 15 7.5 20 J J AH30MS2F-M2 5 7.5 Horsepower Ratings: Motors that exceed the standard horsepower rating may have a starting current that requires the use of appropriate time delay fuses.Hubs not included. 10

  11. Krydon manual disconnect switches resistant to corrosion and heat. ®enclosures make our fused CERTIFICATIONS AND COMPLIANCES FEATURES AND BENEFITS UL 98 — Industrial Control Equipment CSA Certified to C22.2 No. 14 — Industrial Control Equipment NEMA — Type 3R, 4X, 12 I Class J fuses are accepted by the 30 amp fused switch. I “No touch” fuse and switch contacts can only be accessed with the switch in the “OFF” position. I Auxiliary contacts available for PLC signaling. I Meets NEC Article 430 requirements for a separate disconnect switch within sight of all motor loads. I Enclosures rated NEMA 3R, 4X, 12 for reliable performance in outdoor, washdown, corrosive and dusty applications. I Captive stainless steel cover mounting screws are sealed with O-rings for added moisture resistance. I Hinged, gasketed cover is removable for easy installation. I Adjustable mounting feet included for flexible positioning options. I Trunk latch accessory prevents unauthorized removal of cover. SHORT CIRCUIT RATING Suitable for use on a circuit capable of delivering up to 100kA R.M.S. Symmetrical, 600 V/AC maximum. Krydon® fiberglass reinforced polyester enclosure provides high impact strength and excellent corrosion resistance. Removable DIN rail mounting switch allows easy wiring. Cover interlock prevents opening in the “ON” position. Rugged nylon handle accepts up to three padlocks for compliance with OSHA Lockout / Tagout requirements. 11

  12. Additional Toggle Switches Cooper Wiring Devices manufactures a broad range of toggle switches, all built to the highest standards. FEATURES AND BENEFITS CERTIFICATIONS AND COMPLIANCES I Dual back-wire holes for feed-through wiring. I Thick .050" (1.27mm) plated steel strap to withstand abuse. I One-piece brass contact arm and large silver-alloy contact assure low-resistance switching. I Spring-loaded terminal screws (AH1891/AH1991 Series only). I Lighted and Pilot-Lighted styles available (AH1891/AH1991 Series only). Listed to UL, CSA and Federal Specification WS896-E, where applicable. Momentary and Maintained Contact Series AH1891/AH1991 Series Catalog No. 20 Amp AH1991 AH1992 AH1993 AH1994 Rating 120-277 V/AC 120-277 V/AC 120-277 V/AC 120-277 V/AC Basic Catalog Numbers shown above denote brown device. For other colors add suffixes as follows: Available Colors Ivory 15 Amp I 20 Amp I 30 Amp I Description Single pole Double pole Three-way Four-way 15 Amp AH1891 AH1892 AH1893 AH1894 30 Amp AH3991 AH3992 AH3993 AH3994 Specification Grade AC Switches AH1201/AH1221 Series The AH1201/AH1221 Series provides all of the features shown above except for the spring loaded terminals. Gray GRY GRY White W W Red Black RED BL Catalog No. 347 V/AC Canadian Version (CSA only) Rating Description Single pole Double pole Three-way Four-way 15 Amp AH1201 AH1202 AH1203 AH1204 20 Amp AH1221 AH1222 AH1223 AH1224 Catalog No. 120-277 V/AC 120-277 V/AC 120-277 V/AC 120-277 V/AC Rating Description (Add suffix I for Ivory) Single pole Double pole Three-way Four-way 15 Amp 20 Amp 347 V/AC 347 V/AC 347 V/AC 347 V/AC AH18201 AH18202 AH18203 AH18204 AH18221 AH18222 AH18223 AH18224 Basic Catalog Numbers shown above denote brown device. For other colors add suffixes as follows: Available Colors Ivory I Gray GRY White W Momentary and Maintained Contact,Three Position, Center Off — Back & Side Wire Catalog No. 20 Amp 2225V — 2226B 2226V 1995B H.P. Conversion Table (applies to 277 V/AC switches only): Rating 120-277 V/AC Description Single pole - Maintained 15 Amp 1205V — — — 1895B 30 Amp 3035V 3035B 3036B 3036V — 120 V/AC 1⁄2 1 2 240 V/AC 2 2 2 Max Amps 12A 16A 24A 15 Amps 20 Amps 30 Amps 120-277 V/AC Double pole - Maintained 120-277 V/AC Single pole - Momentary NOTES I AC switches are not recommended for use on Master or Emergency Power Systems. I AC Switches can be used on H.P. applications as permitted by NEC® paragraphs 430.83 and 430.109. 1895GY 1995GY — 1895V 1995V — 120-277 V/AC Momentary - Locking 1895L 1995L — Available Colors: B - Brown; GY - Gray; V - Ivory; Locking devices in nickel finish For more information: Replacement Key Description Cooper Wiring Devices Customer Service United States 203 Cooper Circle Peachtree City, GA 30269 Phone: (866) 853-4293 Fax: (800) 329-3055 Visit our web site at: www.cooperwiringdevices.com Catalog No. Canada 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8 Phone: (800) 267-1042 Fax: (800) 761-5748 Replacement Key for 1895/1995L AH2000 Cooper Wiring Devices is a registered trademark of Cooper Industries, Inc. © 2007 Cooper Wiring Devices, Inc. 9-MANCON-07

More Related