1 / 11

Thursday, August 06, 2009

Thursday, August 06, 2009. Inspection Report. Disclaimer The results of this analysis and forecastings are believed to be reliable but are not to be construed as providing a warranty, including any warranty of merchantability or fitness for purpose, or representation

azura
Télécharger la présentation

Thursday, August 06, 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thursday, August 06, 2009 Inspection Report Disclaimer The results of this analysis and forecastings are believed to be reliable but are not to be construed as providing a warranty, including any warranty of merchantability or fitness for purpose, or representation for which INUS Technology, Inc. assumes legal responsibility. Users should undertake sufficient verification and iterative testing to determine the suitability of any information presented. Nothing herein is to be taken as permission, inducement or recommendation by INUS Technology, Inc. to practice any patented invention without a license or to in any way infringe upon the intellectual property rights of any other party.

  2. Test Setup 4 inch gauge block. NIST traceable measurment. Reference spheres used for alignment

  3. Scanning Top: Scanner setup in stereo mode with two 1.3 MP cameras and a 1024x768 projector with a 12 inch diagonal field of view. Right: 11 scans taken, aligned to reference spheres then globally aligned based on mesh geometry (both processes automatic).

  4. Mesh Retriangulated/merged mesh. Note: The accuracy of the length of the gauge block scan is directly effected by alignment accuracy since only one of the two faces can be captured in any individual scan. Deleted unnecessary data. Resultant measured data consists of 33,882 points.

  5. Nominal Data

  6. Scan Data

  7. Best Fit Alignment1

  8. 3D GD&T1

  9. WHL-DEV1

  10. Reference Points

  11. Conclusions The test data presented above show an overall length measurement (3D GD&T1), 16 reference point deviations and a whole shape deviation color map where green indicates measured data within +0.001” Concluding Alignment Accuracy (worst case) = +0.001”

More Related