1 / 15

EMI Analysis & D ebugging Solution

March 2016. EMI Analysis & D ebugging Solution. Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com. Core Technology. 20 World Patents on EMC Techniques. Spectrum Analyzer with the noise source Separation Function.

burtonmelissa
Télécharger la présentation

EMI Analysis & D ebugging Solution

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. March 2016 EMI Analysis & Debugging Solution Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  2. Core Technology 20 World Patents on EMC Techniques Spectrum Analyzer with the noise source Separation Function EMI Noise source Separation Instrument Filter Design and AnalysisInstrument Since 1999 ~ EMCIS Market Automotive Telecommunication Semi Conductor 6 Overseas Distributors Military Aerospace University Research Lab Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  3. EMI Analyzer • World-FIRST EMI solution provider • Capable of perfect EMI Noise solution • Enabling EMI component selection in advance Model : EA-300 Noises from EUT through LISN is displayed on EMI Receiver and the displayed noise is the mixture of Common-Mode(CM) noise and Differential-Mode(DM) noise. Because two different type of noises are shown as the mixed results, it is not-an-easy target to reach EMI solution(debugging)., causing a lot of time and effort (Try and Error). By measuring and analyzing each noise (CM & DM) respectively, the approach to the solution can be clearly correct and accurate path. The solution results – in general, EMI Filters - can be designed easier, quicker and in accurate performance. Furthermore, the solution is possible to be proved by theoretic and visual data. Key Characteristics of EMI ANALYZER System Configuration • Analyzing EMI noises in characteristics respectively, Common-Mode(CM) and Differential-Mode(DM) • EUT Source Impedance Analysis • Most powerful EMI Debugging Instruments • Components performance Evaluation (Coil and Capacitor) • Trial EMI Filter Design and performance simulation • Providing Insertion Loss graph of the selected components • Theoretic Noise analysis and Solution approach Impedance module Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  4. EMI Analyzer EA-300 EA-2100 EA-100 * 1). EA-2100 ; 4 Front Button Control EA-100 ; 1 Front Button Control Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  5. Line Impedance Stabilization • DESIGNED TO CISPR16-1-2 REQUIREMENT • EMCIS’ OWN UNIQUE FUNCTION(Test &Analysis mode) Characteristics Specification EMI Analyzer Spectrum Analyzer LISN EUT LN2-16N • LISN(Line Impedance Stabilization Network) is used in test of Conducted Emission noise measurement, carrying noises generated from power line, to EMI receiver. • LISN supply the power to EUT ; isolates the EUT from interference from external power source ; stabilizes the line impedance ; provides a 50Ohm RF output for connecting it to EMI receiver. • Design equal circuits per lines (Live and Neural in single phase) • Satisfy CISPR16-1-2 requirements. • As EMCIS’ own unique function, LISN has the two different mode selection, Test mode(L1 & L2) and Analysis mode (Common-Mode & Differential-Mode). • Test mode is for same application as conventional LISN and Analysis mode is for application combined with EA-2100, DM and CM mode noise separation. Front control panel Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  6. Line Impedance Stabilization CISPR 25 Vehicle CISPR 16-1-2 LN4-50N / 100A LN1-100C Analysis control panel Hand-hold type In/Output connection Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  7. Line Impedance Stabilization MIL-STD-461E/F CISPR 16-1-2 LN1-50 / 100 LN2-50N / 100A front control Hand-hold type In/Output connection Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  8. DC–LISN for Photovoltaic Inverter • 150Ω DC-LISN for photovoltaic Inverter • Switch for Network-V-Y-Delta type • Continuous DC 100A Dual Line • Specially design for Solar Power system application, using in test of Conducted Emission noise measurement, carrying noises generated from power line, to EMI receiver. • LISN supply DC power to GCPC ; isolates the EUT from interference from external power source ; stabilizes the line impedance • Design equal circuits per lines (Live and Neural in single phase) • Operation continuously in Dual Line-100A • Satisfy CISPR16-1-2 requirements. • As EMCIS’ own unique function, LISN has the two different mode selection, Test mode(L1 & L2) and Analysis mode (Common-Mode & Differential-Mode). • Test mode is for same application as conventional LISN and Analysis mode is for application combined with EA-2100, DM and CM mode noise separation. Characteristics Specification LN2 – 100T Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  9. FILTER ANALYZER FA-300 • Analysis of EMI Filter Characteristics(Auto) • CISPR17 and/or MIL-STD-220B Measurement • Spectrum Analyzer installed • Frequency Range : 9kHz – 300MHz Characteristics Specification • EMI Filter Characteristics Analysis • Filter Spec and Quality Control • Measure and Analyze CM and DM mode function • Attenuation Capabilities Check • Satisfy CISPR17 and MIL-STD-200B measurement • Data Load/Upload/Edit function • Test Report Saving • Easy and simple design in operation process – • Wide Display & Touch Screen • Extended application for components measurement • Mostly powerful instruments for Filter Manufacturer Display screen Specification subjects to change without notice Filter Test Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  10. Filter Analyzer FA-2100 • EMI Filter Characteristics Analysis • CISPR17 and/orMIL-STD-220B Measurement • Frequency range 10kHz ~ 300MHz Characteristics Specification • EMI Filter Characteristics Analysis • - Filter spec and quality control • Measuring and analyzing DM and CM mode function and attenuation capabilities of EMI filters. • Analyze attenuation characteristics of each components like Inductors, Choke Coil,X-Capacitors, Y-Capacitors • Using combined with Network Analyzer and/orSpectrum analyzer equipped Tracking Generator • CISPR17 and/orMIL-STD-220B Measurement • Frequency range from 10kHz to 300MHz • Easy and simple design in operation process –front display panel and push-button - Specifications subjects to change without notices Characteristics of Differential-mode Filter Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  11. Conducted Reference Source CRS-1530 • Providing reference source • Avoiding measurement errors • Comparing measurement site circumstance (EMC Lab ) Characteristics Reference Signal Specification Connection • Provides Reference sources to measuring instruments checking set-up defaults conditions of LISN, cables, etc. • Avoids, in advance, any uncertainty in measurements, causing measurement errors • Usable without changing of set-up condition on EMI measurement • Application • * Authorized EMC Lab • * PrivateEMC Lab • * Research Lab/institutes • * University/Colleges • * Industries • * Others Spectrum Analyzer or EMI Receiver CRS-1530 LISN - Specifications subjects to change without notices Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  12. Multi Power Line Interference Probe MP-930 • Usable on both power source, AC/DC • Easy measurements on power line and • the path noises Characteristics Insertion Loss System Set-up Specification • Capable to measure noise level at each line-end. • Capable to use on standard 440V 3Ph AC line, max 275VAC(rms) between line and ground, both AC/DC. • Measurable from 9kHzto 30MHz, without RF Amp • Useful when EUT is required high current ; when the measuring circumstance is not easy to use LISN • Usable with Spectrum analyzer • Minimizing the possible tolerance in low frequency noises, by adopting HPF(High Pass Filter). With EMI Analyzer MP-930 EMI Analyzer (EA-2100) Spectrum Analyzer L1 GND L2 Capable to analyze/measure Total, DM, CM noises and their levels. With Spectrum Analyzer/ Receiver Spectrum Analyzer MP-930 L1 GND L2 Connecting with Line1,Line 2 and measure total noise level – only possible to measure total noise - Specifications subjects to change without notices Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  13. DC Bias Source DCS - 50D Characteristics Specification System configuration • Analysis of Inductor and/or Transformer functional characteristics • Digital control from 0~20A, at 10mA step • Optional extended range from 10kHz~30MHz. • Use with Impedance Analyzer orLCR Meter. • Attenuation measurement(Max. 100MHz) • Suitable Inductor and/or Transformer design. • Useful in quality control. DC Bias Source LCR Meter or Impedance Analyzer Adaptor DUT Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  14. DC Bias Source DBS-20D/50D LCR Meter Impedance Analyzer System Configuration Accessories Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

  15. Excellent filtering characteristics EMI Filter Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

More Related