1 / 27

The Simbol-X Detector Payload

The Simbol-X Detector Payload. P. Laurent CEA/Saclay & APC. The detector payload. Collimator : ~ 2 m long graded shield. Full out of FOV sky closed with associated sky-shield on mirror S/C. Focal plane assembly. Warm electronics. Focal plane assembly. The focal plane assembly.

daryl
Télécharger la présentation

The Simbol-X Detector Payload

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Simbol-X Detector Payload P. Laurent CEA/Saclay & APC

  2. The detector payload Collimator : ~ 2 m long graded shield. Full out of FOV sky closed with associated sky-shield on mirror S/C. Focal plane assembly Warm electronics

  3. Focal plane assembly

  4. The focal plane assembly Low energy detector (450 mm Silicon) High energy detector (2 mm Cd(Zn)Te) Active and passive shielding • Spectro-imaging system 0.5-100 keV, fast reading • Full size : 8x8 cm2, 128x128 pixels of 625 mm • Operation at ~ -40°C

  5. Low energy detector (MPE/IAAT) ~ 130 eV FWHM @ -20°C 625 μm² • Low power consumption • Internal amplification • Active Pixel Sensor type • 100 % filling factor • Adjustable pixel size (50 mm to 1 mm) • Fast, parallel readout possible Macro Pixel Detector with integrated DEPFET See Peter Lechner presentation !

  6. High Energy Detector Basic Brick (CEA/Saclay) • Detectors : 2 mm thick pixellated CdTe or CdZnTe crystals, under tests and promising -18° / 400V / CdTe Schottky 1 mm / 64 pixels • Electronics : 32 channel front end chip (IdeF-X) under development and tests 1.0 keV FWHM • Hybridization : on going qualification of process, 64 pixels “caliste” modules realized

  7. Test benches ready for systematic current and spectroscopy measurements of different types of CdTe and Cd(Zn)Te HED Detectors Tests (CEA/Saclay)

  8. IDeF-X V2 under test Received on 1st of February 07 Step 1 : Basic behavior Slow control ok, Trigger, parameter tuning, data acquisition Acquisition and modes ok Prototype software ok Test channel ok Step 2 : Performances On going Full Multi-channel started Ready for SEL and SEU tests HED Front End Tests (CEA/Saclay)

  9. First performance evaluation of HED Calistes w/o CdTe High uniformity of the matrix in gain and noise First tests Actual results Noise performances preliminary Gain preliminary CEA/DAPNIA – CNES – 3D plus

  10. The high energy focal plane building One module 256 pixels ~ 1x1 cm2 One sector 8 modules 2048 pixels The focal plane 8 sectors 16384 pixels

  11. Background reduction in Simbol-X • Photons background outside the FOV: passive shielding around the detectors + collimator + sky shield • Particles induced background: plastic scintillators around the detectors

  12. Simbol-X focal plane shielding Plastic scintillator Passive shielding LED HED PM WLS optical fibers Thermal Isolation

  13. The focal plane passive shielding  graded shield X-ray fluorescence E1 X-ray fluorescence E2 X-ray fluorescence E3 Photon energy below the LED low threshold photon X/ γ material 1 material 2 material 3 E3< E2 < E1 Composition and thickness of the shields layers have been optimized to suppress all sky radiation and the resulting fluorescence … Tantalum 3 mm Tin 2,2 mm Copper0,48 mm Aluminum 0, 27 mm Carbon 0,1 mm

  14. The focal plane anticoïncidence: Plastic read by fibers and 16 channels PM main PM 1 redundant PM 1 WLS fibers Multianod PM 16 ch. main PM 2 Plastic scintillator redundant PM 2

  15. The focal plane assembly Support Upper AC  LED et HED Lower AC Base Plate

  16. Inside the protective enclosure … Protective enclosure Calibration wheel FPA

  17. The collimator

  18. Collimator geometry vs satellite movement

  19. Collimator geometry vs satellite movement

  20. Collimator geometry vs satellite movement

  21. The collimator -The Honeycomb Structure has been validated by the CNES. -3 options have been studied with differents parameters for the honeycomb -Actually we have a solution fitting with the mass budget and with a first resonnant mode above 100Hz 2m 20 Total Mass : 23 kg Graded Shield: 6 kg Structure: 17 kg 1m 28

  22. Warm electronics

  23. FPA electronics scheme

  24. FPA warm electronics boxes Green: Power Supply Orange: FPA Link Blue: Data Link Pink: TM/TC Link DPDPA1 DPDPA2 HEDE • Goals : • Minimize the length of the cables • Thermal insulated from Stable Platform ACDE LEDE

  25. Thank you !

  26. FPA thermal budget PE T= 19 RADIATOR @ -60°C T= 1,8 ACDA LEDA TIF= -45 Tspace @ 4K HEDA T= -57 TIF= -48,3 h=1 W.K-1 h=3 W.K-1 Platform T= +20

  27. FPA mass budget

More Related