1 / 25

Low Voltage Low Power Dram

Low Voltage Low Power Dram. Robert Mills. Presentation for: High Speed and Low Power VLSI design course Instructor: Prof. M. Shams. Introduction. Rapidly growing area of Power Aware systems DRAM Design Evolution Goal: Identify Power Sources in Drams Present Design Solutions

fedora
Télécharger la présentation

Low Voltage Low Power Dram

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Low Voltage Low Power Dram Robert Mills Presentation for: High Speed and Low Power VLSI design course Instructor: Prof. M. Shams

  2. Introduction • Rapidly growing area of Power Aware systems • DRAM Design Evolution • Goal: Identify Power Sources in Drams • Present Design Solutions • Examine Ultra Low Power issues (Future Concerns) • Proposed Project Plan and Schedule

  3. DRAM Evolution • Market object: Minimize cost / bit stored • 1973 4Kb, NMOS, 1T1C Cell, 460mW, 300ns • 1986 1Mb, CMOS, Boosted circuits, Vdd / 2 bit line reference, 200mW, 100ns • 1996 64Mb, Cell over bit line, 512 cells per column, 180mW, 60ns • 2001 4Gb, Twisted Open Bit line, 270mW, trc= 70ns

  4. 1T 1C Dram Cell Data or Column line Potential = Vcc for logic 1 and gnd For logic 0. Q = Vcc/2 C  logic 1 Vdd / 2 Q = -Vcc/2 C  logic 0 Word or Row Line

  5. WL2 WL0 WL1 WL3 D1 D1* D0 D0* Simple Array Scheme

  6. 600 nmos 400 cmos Power (mW) 200 4K 64K 1M 16M 256M 256K 4M 64M 16K Trend in Power Dissipation of DRAMS Memory Capacity (bits)

  7. RAM Chip M Row DE ARRAY Periphery Circuits N Column DE

  8. Unified Power Active Equation • P = Vdd Idd • Idd = miact + m(n-1)ihold + (n+m)Cde Vint F + Cpt Vint F + Idcp • At high frequency ac current dominates • Idd Increases with increasing m x n array size

  9. Destructive Read out • On Readout Data line Charged and Discharged • Idd = (mCDDV + Cpt Vint )F • Reduce Active Power: • Reduce charging cap • Lower Vint and Vext • Reduce Static current

  10. Data Retention Power sources • The Refresh Operation reads data of m cells on the nth word line • An Idd flows each time m cells are refreshed • Frequency refresh current is n / tref

  11. Low Power Dram Circuits • Charge Capacitance Reduction by partial activation of Multi-divided data line. • Increase in memory cells directly increases the CD • Divide one data line into several sections & activate only one sub-section.

  12. Multi-divided data-line & Word Line Y SA A2 A3 SA A4 X Decoder Y A5 SA A6 A7 SA Shared Y-decoder, X-decoder and Sense Amp

  13. Reduction in CDT & QDT • Employing Partial Activation + • Multi divided data line and Word lines • For 256Mb DRAM design Cdt expected drop from 3000 pf to 100pf. • Charge Reduction on Qdt from 3100 pC to 102 pC for experimental 256 Mb DRAM

  14. Operating Voltage Reduction • Reduction in Vdd helps reduces Decoder and Perpheral logic power. • CMOS vs nMOS decoders • Half Vdd data-line pre charge lower power in memory array • CMOS circuit - P = 0.46 : A = 0.7 • NMOS circuit - P = 1 : A = 1

  15. fa fr fp D fr fa fp Vdd/2 0 D Half Vdd Pre - charging Scheme

  16. DC Current Reduction • Column signal path circuitry main source of static current. • DC current flows from the I/O line load to the data lines while column is switched on. • Use Address Transition Detection (ATD) circuitry to activate column switch and main amplifier.

  17. Data Reduction Power Retention • Use Voltage conversion circuits • Use Refresh Time extension • Refresh Charge Reduction

  18. 1980 DE 500 Array 24.2W Periphery 640 25.4 W Low C ( CMOS NAND Dec, Part. Act. M-D Data.Line.) 1990 48 168 88 304mW Low Idc ( CMOS Cir, ATD) Low V 5 -> 3.3v Low C ( part. Act. M-D WL) 1994 47mW Low V 3.3 -> 1.5v Low Power circuit Advancement64Mb DRAM (110ns cycle)

  19. Ultra Low Power Concerns • Vt Scaling is major concern for achieving ultra-low voltage power VLSI’s. • DC chip current due to sub threshold current Idc increases exponentially with Vt reduction when Vdd is lowered. • This problem affects data retention current as well as active current.

  20. Trends in Active Current for DRAMS 10 1 Iact 10e-1 Current (A) Iac 10e-2 Idc 10e-3 Capacity 256M 1G 4G 16G 64G Vdd 2v 1.5v 1.2v 1v 0.8v Vt 0.32v 0.24v 0.19v 0.16v 0.13v

  21. Retention Problem • In a Cell, sub-threshold leakage current flow from the capacitor to the data line. • This degrades the data retention time • Drams cells require highest Vt WL DL 1 0 Cs

  22. Two Reduction schemes • The dynamic Vt scheme • In active mode Vt is set low. In stand-by mode the Vt is raised • The Static Vt scheme • Categorized as power-switch and multi Vt scheme.

  23. Conclusion • Source for power dissipation in Drams have been examined • Architectures and Circuits have been reviewed to address these power hungry area. • Future Dram designer need to address Increasing sub-threshold current as Idc >> Iac.

  24. Project Plan & Schedule • Design an Address Decoder and Optimize for low power DRAM application. • Define design problem: 1st – 7th April • Optimize & design Decoder: 8 -15th April • Simulate both designs: 16-22th April • Present Results week of 23rd April • Submit in report on 5th May

  25. References • “Fast Low Power Decoders for Rams”, M. Horowitz, IEEE JSSC, Vol,36, No.10, Oct 2001 • “Low Voltage Memories for Power-Aware Systems”,Itoh, ISLPED ’02, August 12-14, 2002, Monterey, California, USA. • “A 4Gb DDR SDRAM with Gain controlled Pre-Sensing and Ref. Bitline Calibration Schemes in the twisted Open Bitline Architecture”, H. Yoon et al., IEEE, ISSCC-2001 Session 24/DRAM/24.1, Feb. 2001 • “Limitations and Challenges of Multigigabit DRAM Chip Design”, Itoh, IEEE JSSC, Vol. 32, No. 5, May 1997. • “Trends in Low Power RAM Circuit Technologies”, Itoh et al, Proceedings of the IEEE, Vol. 83, No.4 April 1995.

More Related