1 / 2

Mirror Surface

Mirror Surface. Hinges. This SEM picture shows a flip-up mirror. Mirror surface is about 300 m M x150 m M microns area. It has 12 hinges and the whole structure is on a Poly-0 ground plane.

illana-waller
Télécharger la présentation

Mirror Surface

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mirror Surface Hinges This SEM picture shows a flip-up mirror. Mirror surface is about 300mM x150mM microns area. It has 12 hinges and the whole structure is on a Poly-0 ground plane. Notice each hinge has a metal over-lay. Each hinge structure has minimum dimensions. When the mirror is perpendicular to the chip surface, the bottom edge of the active area of mirror will be about 20mM above the chip surface. Create a layout using MEMSCAP Poly-MUMPS technology. Problem 1/2

  2. This SEM picture shows a special hinge called Scissor Hinge. Both the left hand side structure as well as the RHS structure is capable of lifting up. Based on the SEM marker bar you can guess the dimensions. One of the features you see in this SEM is a dimple. Create a layout using MEMSCAP Poly-MUMPS technology. Problem 2/2

More Related