1 / 24

On-orbit MTF assessment of satellite cameras

On-orbit MTF assessment of satellite cameras. Dominique Léger (ONERA) Françoise Viallefont (ONERA) Philippe Déliot (ONERA) Christophe Valorge (CNES). Introduction. Objective assessment of SPOT camera MTF to verify cameras requirements to compare in-flight and ground measurements

lplatt
Télécharger la présentation

On-orbit MTF assessment of satellite cameras

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. On-orbit MTF assessment of satellite cameras Dominique Léger (ONERA) Françoise Viallefont (ONERA) Philippe Déliot (ONERA) Christophe Valorge (CNES)

  2. Introduction • Objective • assessment of SPOT camera MTF • to verify cameras requirements • to compare in-flight and ground measurements • to obtain accurate values to adjust deconvolution filters (SPOT5 THR) • Need to focus camera before MTF assessment • due to possible slight defocus • vibrations during launch • transition from air to vacuum

  3. SPOT family Overview • SPOT1,2,3 • HRV cameras • Pa (10m) B1, B2, B3 (20m) • SPOT4 • HRVIR cameras • M (10m) B1, B2, B3, B4 (20m) • Vegetation camera • B0, B2, B3, B4(1km) • SPOT5 • HRG cameras • HM (5m) B1, B2, B3 (10m), B4 (20m) • THR (2,5m) • HRS cameras (10 m) • Vegetation camera • B0, B2, B3, B4 (1km) SPOT5 SPOT4 SPOT2

  4. Refocusing SPOT cameras • Method • Both cameras image the same landscape • One is used as a reference • Focusing mechanism of the other is moved • Calculation of the ratio of image spectra • integration in band 0.25 fs - 0.35 fs • calculations in row and column directions • result is a function of position p of mechanism • The curve looks like a parabola • a defocus model is fitted on measurements • the vertex gives the best focus • Calculations vs field area • center and edges (SPOT5)

  5. Refocusing SPOT cameras • Refocusing operation sequence (SPOT5 HRG) • Before launch, the cameras are set on best vacuum mean focus p0 • First stage: slight defocusing around p0 • p0-8, p0+8, p0 (~±10 mm) • mechanism validation • first focus estimation p1 • Second stage: sufficient defocusing to overpass p1 • Final estimation of best focus • row-wise and columnwise  astigmatism • field center and field edges • Setting the focus to best mean position

  6. Refocusing SPOT cameras • Results of HRG1 refocusing operations (First stage) • Vertex outside measurement points • Second stage needed

  7. Refocusing SPOT cameras • Results of HRG1 refocusing operations (second stage) • Best focus (field center): p0-13 • Astigmatism: -7 (one focusing step = 1.2 mm)

  8. Refocusing SPOT cameras • Best focus and astigmatism vs field area (with respect to p0) • Final focusing • HRG1: p0-12 • HRG2: p0-7

  9. Relative MTF measurement method • Both cameras image the same landscape (with and without shift) • Landscapes with a large frequency content (e.g. big cities) • Three kind of imaging 1 HRG1 HRG2 2 HRG1 HRG2 3 HRG1 HRG2 1  Frequency content comparison between homologous areas • Field centers, field edges 1+ 2 (3)  Frequency content comparison in the field of one instrument • e.g. 1+2  HRG1 left edge versus HRG1 center L C R

  10. Absolute MTF measurement methods • Overview of methods from SPOT1 to SPOT5 • Visual assessment • HRV cameras SPOT1, SPOT2, SPOT3 • Point source method • SPOT3, SPOT4, SPOT5 • Step edge method • Natural target SPOT4 HRVIR & SPOT5 HRS • Artificial target SPOT5 HRG • Bi-resolution • SPOT4 HRVIR (vs airborne) SPOT4 VGT (vs HRVIR) • Periodic target • SPOT5 HRG

  11. MTF measurement methods: Visual assessment • SPOT1, SPOT2, SPOT3 HRV cameras • Only panchromatic band • Aerial imagery of urban sites • 20 sites chosen in the south of France • Simulation of the corresponding satellite imagery • For each site, images with decreasing MTF are simulated • The whole set of images is called MTF catalog • In-flight, visual comparison of actual and simulated images • MTF of the catalog image nearest to the actual image gives a rough assessment of the in-flight MTF

  12. MTF measurement methods: Point source • SPOT3 HRV, SPOT4 HRVIR, SPOT5 HRG • Pa and XS bands • Image of a spotlight aimed at the satellite • In SPOT5 THR mode, the PSF is sufficiently sampled • MTF is obtained by Fourier transform of the PSF • In other modes, two ways to overcome PSF undersampling • To use a MTF model • To combine several images to rebuild sufficiently sampled image • or to use several spotlights

  13. MTF measurement methods: Point source • Unique point source method • Integrating point image (row-wise or columnwise) • 1D problem • Reference LSF = FT(parametric 1D MTF model) • Two parameters: MTF and phase (versus sampling grid) • Matching LSF samples with reference  Value of the MTF parameter • Corresponding MTF = 1D in-flight MTF  Value of the phase parameter • Stability of MTF • Possibility to mix the various sets of LSF samples • If different phase parameters

  14. MTF measurement methods: Point source • Two point source method • Simplified version of point source array • Integrating point image (row-wise or columnwise) • 1D problem • Hypothesis MTF is negligible beyond frequency sampling  Two points are sufficient • Experiment with two spotlights (SPOT5)

  15. MTF measurement methods: Point source Spotlights on a grassy uniform area Xe lamp: 3kW Xe lamp: 1kW

  16. MTF measurement methods: Point source

  17. MTF measurement methods: step edge • Step edge method • Image of a target (artificial or natural) with a sharp transition between dark and bright area • With a slight edge inclination, we can interleave successive rows (or columns) to rebuild a sufficiently sampled response to Heaviside function • Again, this is not necessary with THR mode • Modulusof ratio of FT (edge response) to FT (edge) = in-flight MTF • Two kinds of edge • Natural edge: agricultural fields • Difficulty to find a good one and to validate it • Artificial edge • A checkerboard target has been laid out (Salon-de-Provence in south of France) • 60 x 60 m

  18. MTF measurement methods: Natural step edge • Fields near Phoenix (SPOT5 HRS2 10/06/02) • Example of an almost horizontal edge • along the track measurement

  19. MTF measurement methods: Natural step edge Example of result with HRS • Method improvement: MTF model is fitted on MTF curve

  20. MTF measurement methods: Artificial edge target • Salon-de-Provence target (SPOT5 HRG1 26/07/02)

  21. MTF measurement methods: Bi-resolution • Principle • Same landscape acquired with two spatial resolutions (same spectral band) • High resolution image = reference • Low resolution image = sensor under assessment • In-flight MTF = Modulus of ratio of FT (LR image) to FT (HR image) • Two situations • Satellite image versus aerial image • Attempt with SPOT4 HRVIR • Both sensors on the same satellite • Attempt with SPOT4: VGT1 versus HRVIR

  22. MTF measurement methods: Periodic target • Opportunity to acquire Stennis Space Center radial target with SPOT5 HM (5m) THR (2.5m)

  23. MTF measurement methods: Comparison • Comparison of SPOT5 HRG1 MTF measurements • Direction Rows Columns Diagonal • Spotlight 0.35 0.32 0.15 • Step edge 0.33 0.30 • Radial target 0.38 0.18 • Ground 0.31 0.36 • Specification 0.25 0.23 • Close results for different methods • In-flight and ground measurements similar and better than specification

  24. MTF measurement : Comments on best methods • Artificial step edge • Well suited to high-resolution satellites (GSD < 5 m Salon-de-Provence target) • Target building and maintenance expensive • Only two measurement directions • Spotlight • Suitable to GSD up to 30m • No orientation constraint • Needs a team on ground • Bi-resolution • Attractive with different GSD cameras aboard the same satellite • Radial target • Interest of visual assessment in addition to MTF measurements • No orientation constraint • Target building and maintenance expensive

More Related