1 / 19

External Home Control with Remote-Access Self-Routing Robot

External Home Control with Remote-Access Self-Routing Robot. Neil Gabriel Josh Ostrander. Project Objectives. Provide undisturbed movement between rooms of a simulated floor plan Accurate representation of position on client software. Specifications.

mallory-berry
Télécharger la présentation

External Home Control with Remote-Access Self-Routing Robot

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. External Home Control with Remote-Access Self-Routing Robot Neil Gabriel Josh Ostrander

  2. Project Objectives • Provide undisturbed movement between rooms of a simulated floor plan • Accurate representation of position on client software

  3. Specifications • Navigation through the 6’ x 8’ floor plan • Ability to navigate to each room • Movement restricted to specified “arcs” with an accuracy of + 3 inches • Additional accuracy possible in “Triangulation Regions” • Up to + 1 inch

  4. Division of Responsibilities • Neil • Smart Panel • Client UI • IR System • X10 • Joshua • Motor Control • Sonar • HC12 Code • Both • System Integration

  5. Block Diagram

  6. Client User Interface Smart Panel (Home Server) High-level Software Design • User-Interface Responsibilities: • Displaying all home data • device status • robot position • Relaying user-commands to Smart Panel • Smart Panel Responsibilities: • Maintaining home persistency data • Robot Navigation • Issuing X10 commands

  7. User-Interface

  8. User-Interface Cont …

  9. IR System • Ir Emitters • 940 nm wavelength • 180° viewing area • Ir Detection Modules • 940 nm wavelength • 100° detection area • Double Modulated IR • 38 kHz carrier frequency • 300 Hz signal frequency

  10. IR Modulation Circuit

  11. Motor Control

  12. Power Consumption • Two separate power sources • 2400 mAh RC battery pack • Stepper motor power supply uses 6 VDC • Draws 2A max (2.2A x 6V = 13.2W) • 13.2 Watt Power Consumption • 9 VDC • HC12, RF module, IR detectors, sonar module • Draws 180mA (180mA x 5V = 0.9W) • 0.9 Watt Power Consumption

  13. Current Progress • Server “Smart Panel” – 90% • Client Software Program – 90% • RF Communication – 90% • Motor Control – 75% • Sonar System – 75% • IR System – 75% • System Integration – 25 % • Test/Debugging – 25%

  14. Basic Test Plan • Place PRA device in start position of Room A • Select Room C as the destination using the client application • Start movement of PRA by clicking “GO” on client application • PRA moves from start to A2 • A2 to B1 • B1 to B2 • B2 to C1

  15. Basic Test Plan Cont… • Measure location of PRA and compare with client application (+ 3 inches) • Select triangulation region in Room B as destination • Start movement of PRA by clicking “GO” on client application • PRA moves from C1 to B2, stopping in triangulation region • PRA triangulates its position using beacons C1, B2, and A2 • Measure location of PRA and compare with client application (+ 1 inch)

  16. Test Plan Layout

  17. System Cost • 2 – RF Transceivers (2 x $100) = $200 • 5 – X10 wall devices (5 x $15) = $75 • 2 – 2400mAh Batteries (2 x $25) = $50 • 1 – Fast Charger = $50 • 1 – SRF04 Sonar Module = $40 • Misc. Electrical Components = $100 • Misc. Parts for PRA Chasse = $30 Total $545

  18. Potential Problems • Stepper Motor Torque • Still may not be reliable enough • Change Castor wheel • Switch to standard DC motors • IR Accuracy • Need to minimize “detection cones” • RF Communication • Interference detected in the lab • Code Space on HC12 • Only 20% left

  19. Questions? • Comments?

More Related