1 / 27

Microbiology: Testing for Bacteria

Microbiology: Testing for Bacteria. Linda Wolf Glencoe High School SWRP Teacher for 12 years. Pathogens . Pathogens are organisms capable of causing disease The following are some of the “bad guys”: Protozoa : Giardia, Cryptosporidium

niveditha
Télécharger la présentation

Microbiology: Testing for Bacteria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Microbiology:Testing for Bacteria Linda Wolf Glencoe High School SWRP Teacher for 12 years

  2. Pathogens • Pathogens are organisms capable of causing disease • The following are some of the “bad guys”: • Protozoa: Giardia, Cryptosporidium • Bacteria: Salmonella typhi, Legionella, Shigella, Vibrio cholerae, Vibrio vulnificus • Virus: Hepatitis, Polio

  3. Sizes • Bacteria are 2 - 4 µm • Viruses are 0.02 - 0.09 µm For reference: • 106 microns (or micrometer, µm) = 1 meter • 1000 µm = 1 mm

  4. Testing for Pathogens • Direct testing for pathogens is impractical • Pathogens are usually found in low numbers • Can’t survive for very long outside the warm confines of a human or animal body • Too many methods are too sophisticated and expensive

  5. Indicator Bacteria • Some bacteria can be good indicators of human pollution – the source for most pathogens • Bacteria present in sewage pollution • Survive longer than pathogens • Easily detectable

  6. Total Coliforms E. coli Fecal Coliforms Common Indicator Bacteria • Total Coliforms • Fecal Coliforms • E. coli • Enterococci

  7. Total coliforms • Rod-shaped, gram negative bacteria • Ferment lactose at 35°C • Found in intestinal tracts of cold and warm-blooded animals • Group members: Escherichia, Klebsiella, Enterobacter, Serratia, Citrobactera, Edwardsiella

  8. Fecal coliforms • Subset of Total coliform group • Present in sewage and indicate possibility of human pathogens • Distinguished from Total coliform by ability to ferment lactose at 44.5°C • Group members: E. coli and Klebsiella (not always fecal often associated with paper, textile & pulp waste)

  9. Fecal coliforms • Common in the intestines of both warm and cold-blooded animals • If fecal coliforms are present it is presumed that human or animal excrement is present • Diseases such as typhoid fever, hepatitis, gastroenteritis, dysentery and ear infections can be contracted in water with high Fecal coliform levels

  10. E. coli • Escherichia coli is a specific species within the Fecal coliform group • Specific to intestines of mammals and other warm blooded animals • Only specific strains (i.e. O157:H7) are pathogenic • According to EPA, is the best indicator of health risks from water contact recreation

  11. Enterococci • Survives in salt water • More human specific • Found primarily in the intestinal tract of warm-blooded animals • Used in some states as indicator organism in estuarine and marine waters

  12. Bacterial Measurement • Membrane Filtration Methods • Quantify bacteria numbers by filtering water, growing bacteria, and counting • Most Probable Number Methods • Estimate bacterial numbers based upon a color change or amount of gas produced through a specific bacterial metabolic process

  13. Membrane Filtration • Known volume of water is filtered through a filter (0.45 µm) that is capable of trapping all bacteria • Filter transferred to Petri dish containing growth media • Individual bacterial cells will grow on the filter into visible colonies in 24 hours

  14. Membrane Filtration • m-ColiBlue24 broth • Due to the metabolism of the bacteria on the media: • Blue colonies indicate E. coli • Red colonies indicate other Total coliform bacteria • E. coli turn blue from the action of β-glucuronidase enzyme on 5-bromo-4-chloro-3-indolyl-Beta-B-glucuronide

  15. Procedure • Collect water in a sterile container • Filter water within 6 hours* • Place sample in cooler if taking to lab *6 hours is standard holding time, but samples should definitely be filtered within 24 hours

  16. Prepare plates • Determine amount of water to filter 5 plates for each site • For each site label one plate 0 mL for a “blank”

  17. Prepare Plates • Label bottom of plate with: • Date and time • Sampling site • Volume to be filtered • Use sterile forceps to place sterile absorbent pad in each plate, if plates don’t already have them • Place about 2 mL of broth on each pad, using either a sterile pipette or by shaking and pouring ampule

  18. Filter Samples • Sterilize forceps, place membrane filter on filter holder • Use sterile water for small samples of water (1 mL) to wet the filter • Pump until most of water is through filter • Release pressure • Sterilize forceps and place filter grid-side-up on the absorbent pad

  19. Plates • Put cover on plate • Leave upright until all plates are filtered • Incubate upside down for 24 hours in an incubator at 35° C

  20. Calculating Results • Count the blue and red colonies on each plate • Blue colonies are E. coli • Red + Blue = Total Coliforms • If there are greater than 200 colonies report that plate as TNTC (Too numerous to count)

  21. Most accurate plates The best are when the colony counts are in the range of: • 20 – 80 colonies per plate for E. coli, and • 50 – 200 for Total coliforms

  22. Calculating Results • Standard Units = CFU/100 mL (Colony Forming Units) • Average colony counts x 100 = CFU/100 ml Volume Filtered (mL) • If fewer than 20, estimate CFU/ 100 ml using all plates. Add total number of colonies and total volume Total colony counts x 100 = CFU/100 ml Total mL filtered

  23. Other problems • If over 200, but colonies are clearly countable, use the same general formula. • Conflicting colony counts: go with the smaller sample size

  24. 0 mL filtered 1 mL filtered 0 colonies counted 6 colonies counted 10 mL filtered 30 mL filtered The 10 mL plate would be used for calculating CFU/100 mL: 24 / 10 x 100 = 240 CFU/100 mL 24 colonies counted 67 colonies counted

  25. 0 mL filtered 1 mL filtered • 1 mL plate has more colonies that 10 mL plate. • Possible problem(s): • mislabeled plate • contaminated apparatus 0 colonies counted 23 colonies counted 10 mL filtered 30 mL filtered The 1 mL plate would be used for calculating CFU/100 mL: 23 / 1 x 100 = 2300 CFU/100 mL 52 colonies counted 18 colonies counted

  26. 0 mL filtered 0 mL filtered Possible problem: finger on filter or contaminated forceps Possible problem: “sterile” water not sterilized 6 colonies counted 7 colonies counted The sterile water “blank” or 0 mL plate is a quality control measure – bacterial growth on the blank makes the other plate counts suspect. 1 mL filtered 30 mL filtered Estimate or report as Too Numerous to Count (TNTC) 23 colonies counted Possible problem: filter not wetted with sterilized water before filtering low volume sample – sample concentrated in one area of filter. Example of plate with more than 200 colonies. Colonies could be counted or estimated, and results flagged as “estimate”.

  27. Water Quality Standards • In Oregon, based upon contact recreation • 126 CFU/100 mL for 5 samples within a 30 day period • 406 CFU/100 mL for a single sample

More Related