1 / 12

LADDER SAFETY PROGRAM

LADDER SAFETY PROGRAM. Ladder Safety. “No matter how quickly a job can be done, there is always time to fall”. Ladder Safety OSHA 29 CFR 1910.25-27. Ladder Selection Ladder Inspection Ladder Set-up Ladders Safety Ladder Maintenance and Storage. Ladder Selection-Material.

nlanier
Télécharger la présentation

LADDER SAFETY PROGRAM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LADDER SAFETY PROGRAM

  2. Ladder Safety “No matter how quickly a job can be done, there is always time to fall”

  3. Ladder SafetyOSHA 29 CFR 1910.25-27 Ladder Selection Ladder Inspection Ladder Set-up Ladders Safety Ladder Maintenance and Storage

  4. Ladder Selection-Material Fiberglass: Nonconductive, which makes it a good choice when working around electricity. It is also corrosion resistant and ideal for outdoor use. Aluminum: Lightweight, but not for use when contact with electricity is possible. It is easy to maneuver when frequent handling is required. Wood: Nonconductive, which makes it a good choice for working around electricity. It is an economical choice for heavy maintenance and construction.

  5. Ladder Selection-Type & Capacity Type Capacity* Use IA 300 lbs Extra heavy-duty industrial contractor I 250 lbs Heavy-duty industrial contractor II 225 lbs Medium-duty commercial III 200 lbs Light-duty household * Total load capacity includes combined weight of user, tools and any other material on ladders

  6. Ladder Selection-Size Stepladders – No more than 20 feet high Ladder Size Maximum Standing Height 4 feet 2 feet 6 feet 4 feet 8 feet 6 feet 10 feet 8 feet 12 feet 10 feet

  7. Ladder Selection-Size Extension Ladders - No more than 60 feet Normal Length Overlap required Up to and including 36 3 feet Over 36, up to and including 48 4 feet Over 48, up to 60 5 feet Maximum working height – Avoid using the top four (4) rungs

  8. Ladder Safety Don’t: overreach from a ladder use the top two rungs use wood or metal ladders move a ladder while on it climb with material share a ladder • Do: • move the ladder • get a taller ladder • use fiberglass only • get down and move the ladder • use a tool belt • get a 2nd ladder

  9. Ladder Inspection Rungs must be intact and clean, especially free from grease and oil. Make sure there are no splinters or sharp edges. See that metal ladders are not dented or bent. Make sure the hinge spreader works properly. All support braces and bolts must be secure. Ensure rope is not frayed or badly worn on extension ladders. Safety feet and auxiliary devices functional.

  10. Ladder Set-Up Erect on solid level surface. Never place in front of door unless door is secured. Stepladder – ensure the spreader is locked. Tie-off (lash) top and bottom if no one is available to hold to prevent slipping. Extension – extend ladder 3 feet above support if used to access roof or other elevated surfaces. Extension – use the ¼ rule (for every 4 feet in height, move 1 foot at base).

  11. Ladder Safety Always have three points of contact when climbing (two feet/one hand or two hand/one foot). A good rule of thumb is never let one’s belt buckle outside the uprights-always face the ladder. Wear slip resistant type shoes with heels. Do not carry objects up and down the ladder. Raise and lower needed tools and materials with a rope or bucket. Use fall-protection when required.

  12. Ladder Maintenance and Storage It’s best to hang a ladder horizontally on wall hooks in a dry place not subject to temperature extremes and direct sunlight. Metal bearings of locks, wheels, pulleys, etc., shall be frequently lubricated. Have repair work done only by a competent repair shop. If there is major damage – discard.

More Related