1 / 1

Project

Surface Dynamics responsive surface topographies Anne Hélène Gélébart and Dick Broer. Introduction

orpah
Télécharger la présentation

Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Surface Dynamics responsive surface topographies Anne Hélène Gélébart and Dick Broer Introduction Responsive surfaces have been of interest over the last decade. The creation of micro (and nano) structures on surfaces is very appealing since those protrusions can change the properties of the whole surface : control of the wettability (self-cleaning surfaces), of the friction coefficient (tribology and haptic applications), the optical properties, etc. From previous researches[1], it has been shown that using a photoresponsive liquid crystal network (LCN) high deformation (up to 10%) can be obtain in an irreversible and especially in a reversible fashion. 1: D.Liu , 2013, Responsive surface topographies, PhD thesis. Relief formation hν hν Figure 2: Exposure of the LCN under UV light (365nm) under a mask. Figure 3: Example of surface deformation. Figure 1: Isomerization of the azobenzene moieties lead to dimensional changes. Under UV exposure the photoresponsive molecule (azobenzene) undergoes isomerization from trans to cis leading in a decrease of molecular order, This is accompanied by dimensional changes as shown on the Figure 1. When a LCN is exposed to the UV light the same mechanism will occurs leading to the formation of protrusion at the exposed areas (Figure 2). The shape of the deformation can be tuned using different masks. The measurement of the deformation is done using a interferometer, figure 3 shows an example of deformation that can be obtained. Project We now want to create self-oscillating surfaces. There is a big step to go from reversible response to self oscillating but the stakes is huge. Indeed this would lead to new systems for microfluidic application but also for energy harvesting and why not for biomedical application. If you are willing to take part in this challenging adventure, you will create LCN and characterize them. Later you will activate your system and study their dynamics. Different mixtures and processing conditions will have to be investigated. If you are interested or if you need more information do not hesitate to contact us : Anne Hélène Gélébart (A.H.gelebart@tue.nl, STO 0.39, tel. 040-2478414)Dick Broer (D.broer@tue.nl, STO 0.27, tel. 040-2475875) / ST FunctionalOrganic MaterialsandDevices

More Related