1 / 6

QXF coil wiring options

QXF coil wiring options. M. Marchevsky. Objectives. Simplify wiring / connector layout, reducing wire “cluttering” at magnet ends Make wiring and connectors more reliable and less prone to damage or shorts Minimize technician effort required for wire routing, soldering and labeling

qamra
Télécharger la présentation

QXF coil wiring options

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. QXF coil wiring options M. Marchevsky

  2. Objectives • Simplify wiring / connector layout, reducing wire “cluttering” at magnet ends • Make wiring and connectors more reliable and less prone to damage or shorts • Minimize technician effort required for wire routing, soldering and labeling • Ensure necessary electrical characteristics for the breakdown and insulation robustness

  3. Kapton-insulated ribbon and twisted pairs

  4. QXF Vtap wiring option: ribbon cable VTA01 IL VTB01 This scheme, however, is difficult to realize when together with the plan, where IL and OL wires are routed through different paths around the load plate

  5. QXF Vtap wiring option 2: shielded twisted pairs VTA01 VTB01 Cable shields can be held at “shell” potential and routed out through the available pins in the termination connectors

  6. D and C type PEEK connectors Sub-C Sub-D D-sub connectors can bought pre-fabricated with the ribbon cables of specified length

More Related