1 / 20

M3000 Low Voltage Motors for Hazardous Areas

M3000 Low Voltage Motors for Hazardous Areas. Apparatus groups Group I - Mines susceptible to firedamps Group II - Other places Gas groups (needed only for Ex d and Ex i) IIA (e.g. Propane) IIB (e.g. Ethylene) IIC (e.g. Acetylene and Hydrogen) Zones Zone 0 - continuously

quasar
Télécharger la présentation

M3000 Low Voltage Motors for Hazardous Areas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. M3000 Low Voltage Motors for Hazardous Areas

  2. Apparatus groups • Group I - Mines susceptible to firedamps • Group II - Other places • Gas groups(needed only for Ex d and Ex i) • IIA (e.g. Propane) • IIB (e.g. Ethylene) • IIC (e.g. Acetylene and Hydrogen) • Zones • Zone 0 - continuously • Zone 1 - occasionally • Zone 2 - in abnormal conditions • Temperature classes Ex nA EEx nA Ex e EEx e Ex p EEx p Ex d EEx d Zone 2 /Category 3 in abnormal conditions Zone 1 / Category 2 Occasionally Zone 0 Category 1 Continuously Ex e EEx e Ex p EEx p Ex d EEx d Not suitable for motors T1 T2 T3 T4 T5 T6 450°C 300°C 200°C 135°C 100°C 85°C IEC and EN standards

  3. II 2 G / D 0081 • Gas or Dust • Equipment Category (Zone 1) • Group of equipment for Surface • Use in explosive atmosphere • ExNB • CE-marking EEx d II C T4 Marking (EN) Marking according to ATEX-directive Standard marking according to EN-standards • EEx - Explosion protected apparatus (Euro Norms) • Type of Protection • II - Group (other than mines) • A, B, C - Gas groups • Used only with protection types d and ia/ib • Temperature Class

  4. Ex nA II T3 • EEx - Explosion protected apparatus • nA - Type of Protection • II - Group (other than mines) • A, B, C - Gas groups • Used only with protection types d and ia/ib • Temperature Class T1 T2 T3 T4 T5 T6 450°C 300°C 200°C 135°C 100°C 85°C Marking (IEC)

  5. ATEX Certified • Frame sizes 71-315 ATEX certified • Flameproof 80-315 • Non-sparking 71-315 • Dust ignition proof 71-315 • Increased safety 80-315 • Frame sizes 355-400 certification ongoing, ready by end of 2002

  6. Directives Marking Until 29.2.1996 1.3.96-30.6.2003 From 1.7.2003 76/117/EEC, Valid Valid 79/196/EEC and 82/130/EEC Valid Valid 94/9/EC (Atex) Basics of ATEX directive and timetable ATEX-directive (94/9/EC) • Compulsory after end of June 2003 • Covers all equipment, which will be installed in hazardous area in EU(also non-electrical devices) Requirements are divided in three categories: • Technical requirements from harmonised EN-standards • Health and Safety aspects • Production Quality requirements Timetable • ABB delivered the first ATEX certified motor in 02/1999

  7. ATEX directive - Requirements • Technical • All technical requirement based on harmonised EN standards • Harmonisation • New EN standards cover all EU countries • Health and Safety • All requirements focus on safety instructions • All equipment must be delivered with instructions for safe: • putting into service, use, assembling and dismantling, maintenance, installation, adjustment • In practice manuals (in English) and safety instructions (official language of the country and in English)

  8. EC Declaration of Conformity Directive 94/9/CE (ATEX): The only document which is mandatory to be given with each delivery is: EC Declaration of Conformity. With this document ABB takes the commitment and responsibility that the products respect the ATEX directive. This document gives information on; - product quality assessment notification - EC type examination certificate (with reference numbers).

  9. Hazardous area motors • Frame sizes 71 to 400 • Output power 0.25 to 630 kW • M3000 concept • Variants • Flameproof EEx d(e) • Increased Safety EEx e • Non-sparking EEx nA/Ex nA • Dust Ignition Proof

  10. Flameproof motors EEx d/EEx de IIB/IIC T4 Frame sizes 80 to 400 Output power 0.55 to 630 kW • EEx d Motor and terminal box flame proof • EEx de Motor flameproof and terminal box of “Increased safety EEx e” -construction

  11. Increased safety motors EEx e II T3 Aluminium Frame sizes 90 to 250 Output power 1.1 to 53 kW Cast Iron Frame sizes 80 to 400 Output power 0.55 to 330 kW • According to • EN 50014/50019 • VIK (only cast iron) • Temperature classes T2-T3

  12. Non-sparking motors EEx nA/Ex nA II T3 Aluminium Frame sizes 90 to 280 Output power 1.1 to 95 kW Cast Iron Frame sizes 71 to 400 Output power 0.25 to 630 kW • Present marking • EEx nA acc to EN 50021 • Ex nA acc to IEC 79-15 • Ex N acc to BS 5000:16 • Temperature class T1-T3

  13. Motors for dust ignition protection (DIP) Aluminium Frame sizes 90 to 250 Output power 1.1 to 55 kW Cast Iron motor Frame sizes 71 to 355 Output power 0.25 to 500 kW • Zones 21 and 22 • acc. to EN 50281-1-1 • Category 2 D - T125°C - IP65 • Category 3 D - T125°C - IP55

  14. Terminal box Lifting lugs Improved cooling Bearings Sealing Active material Frame Corrosion protection Basic motor design

  15. Bearings • Lubrication • Lifetime lubrication sizes 71-132 • Regreasable bearings sizes 160-400 • Sealing • 2RS integral seals sizes 71-132 • Gamma ring sizes 160-250 • V-ring sizes 280-400 • Valve disc as standard in sizes 160-400

  16. Terminal box • 4 x 90° turnable as standard in sizes 71-250 and 2 x 180° in sizes 280-400 • Cable glands included in cast iron sizes 160-400, except by flameproof EEx d motors • Metric threads as standard • Easy fastening for separate terminal box

  17. Rating plate examples IEC 71 - 132 Flameproof motors • Stainless steel • Individual serial number IEC 160 - 400

  18. Ex-motors and frequency converters • Designed for variable speed drive as standard • Special attention to be taken: • Winding insulation level • Bearing insulation • Loadability • Second rating plate

  19. Flexible in design • Flexible in design for modification of/to • Encoders • new standard hollow-shaft encoders, Ex-certified • Separate cooling • same fan as in standard cooling • smaller fan and fan motor • fan motor Ex-certified

More Related