1 / 3

Just After Cl -ICP

Just After Cl -ICP. After HF etch, and 250’C 2.5h anneal. Less membrane supporting, some lines wrap and break. In some area, the Ni was totally removed. Two remaining problems:.

ronli
Télécharger la présentation

Just After Cl -ICP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. JustAfterCl-ICP

  2. AfterHFetch,and250’C2.5hanneal Lessmembranesupporting,somelineswrapandbreak Insomearea,theNiwastotallyremoved

  3. Tworemainingproblems: TheNi/SiO2/HfO2fromthebacksideisnotsoeasytobefullyremoved,andIcouldnotgetreproduciblegoodTEMimages. TheNilinesontopoftheNiareattachedbytheCl-ICPetch. PossibleSolutions: Dry the Ni-InGaAs bonding again with the small-window TEM grid, as well as thinner Ni layer that will not react all through the 50nm InGaAs. Writing the fins with HSQ fully cover the Ni to protect it, and use thicker Ni (200 nm).

More Related