1 / 13

Chur -Robot

Chur -Robot. Team Churro: Sharon Grimshaw, Maggie Su, Louis Yi, Morgan Zheng. Project Goals. Safe and sturdy Attached to base plate Stove relatively enclosed Easy to use and maintain One container to load Cooking time preset User choice in length and shape of churro Button pad to choose.

sahara
Télécharger la présentation

Chur -Robot

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chur-Robot Team Churro: Sharon Grimshaw, Maggie Su, Louis Yi, Morgan Zheng

  2. Project Goals • Safe and sturdy • Attached to base plate • Stove relatively enclosed • Easy to use and maintain • One container to load • Cooking time preset • User choice in length and shape of churro • Button pad to choose

  3. Logistics • Budget: spent $177.50 and do not envision spending any more money • Looking back: did not have to be quite as concerned about budget, which would have helped us to stay on schedule • Schedule: a bit of a push at the end, but fairly well planned out • Looking back: could have started testing earlier so that we had more time to address problems that came up

  4. Mechanical: Overview

  5. Mechanical: Subsystems Left: Extruder Right: Tip exchanger

  6. Mechanical: Subsystems Lifter mechanism

  7. Mechanical: Subsystems Sugar tray shaker Stirrer

  8. Electrical: Overview

  9. Electrical: Subsystems Steppers

  10. Electrical: Subsystems Servos

  11. Electrical: Subsystems Thermocouple Buttons

  12. Software: Arduino • Waits for two inputs • Runs through sequence of motors: • Extruding and cutting • Stirring • Lifting • Shaking • Monitoring temperature of oil and time throughout cooking process • Safety gauge: flashing light with frequency determined by temperature of oil

  13. Questions or Comments? DEMOS!!!

More Related