1 / 18

SolidWorks Workshop Waterjet 10/4 /14

SolidWorks Workshop Waterjet 10/4 /14. Michael Lynch. Goals. Understand the Waterjet What it is How the team uses it Advantages and Limitations Understand DXF Files. MechSE Waterjet. How It Works. Mechse Waterjet. Advantages Tolerances of up to 0.005” Can cut up to 3” thick steel

sanura
Télécharger la présentation

SolidWorks Workshop Waterjet 10/4 /14

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SolidWorks WorkshopWaterjet10/4/14 Michael Lynch

  2. Goals • Understand the Waterjet • What it is • How the team uses it • Advantages and Limitations • Understand DXF Files

  3. MechSEWaterjet

  4. How It Works

  5. MechseWaterjet Advantages • Tolerances of up to 0.005” • Can cut up to 3” thick steel • Does not burn material like a laser cutter would • Highly automated process • Free for us to use! Disadvantages • Very noisy • Does not work well with water soluble materials • Brittle materials (acrylic) don’t cut well • Increased taper due to waterjet diffusion • Large kerf, roughly 0.4mm for metals, 0.1mm for plastics and other non-metals

  6. Start up SW Something comes up about a license, just hit “Accept” Start menu >> All Programs >> SolidWorks 2014 >> SolidWorks 2014 x64 Edition

  7. Project – Chassis Tab • Units in IPS • Create a new part • Extruded Boss/Base • Select Top Plane

  8. Project – Chassis Tab • Sketch Center Rectangle • 1.5” x 0.5” • Extrude to 0.06” • Extruded Cut • 0.25” hole • 0.25” from each side • Cut should be through all

  9. Project – Chassis Tab • Fillet • Select top 2 edges and choose 0.25” radius • Note: We could have made this by just sketching it initially, but then we would not easily be able to change the radius of the filets

  10. Project – Chassis Tab • Extruded Cut • Center circle and snap to edges • Through All

  11. Convert to DXF • We have a completed part, but the waterjet can’t use it • Need to convert to DXF • DXF files are a standard file format created by Autodesk for 2D (and sometimes 3D) files • Can easily be used by non-Autodesk software • Important Notes: • DXF files are NOT parametric.; they approximate geometry using lines • DXF files are NOT unit specific; they just include numerical values • We will see why this is important!

  12. Convert to DXF • File -> Save As -> DXF • Change orientation to TOP • Make sure to save!

  13. Open DXF • Choose your favorite DXF viewer • DWGTrueView works nicely (and is free), but can only view, not edit • DraftSight is also an Option (installed on EWS machines) • Remove Text • Feel free to examine file, measure dimensions, etc.

  14. Problems • We now have a DXF file that can be used by the waterjet! • Problems: • Waterjet operator has no idea what dimensions the part is, must use best guess • The circled red areas will give the waterjet problems since lines are inexact, and there are likely gaps

  15. Solutions • When you email your part to waterjet operator/subsystem leader, make sure you specify units (preferably inches)! • Waterjet Software can edit files and close gaps in DXF File • Sometimes things still don’t work when you have these tangent lines • Waterjet gets very confused and doesn’t know which side of the line to cut on

  16. Solutions – Redesign Part! • Fillet • Select edges, radius of 1/32” • Tradeoffs: • Disadvantage: Loss of material, less area to weld tab • Advantage: That material didn’t add much strength to the part and would likely get destroyed in welding process • Advantage: Waterjet user won’t hate you

  17. Questions?

More Related