1 / 16

MORE Instructions For Continued Airworthiness

MORE Instructions For Continued Airworthiness. Left mouse click to move to next slide. BACKGROUND There are a total of eight MORE STCs applicable to thirty different models of Pratt & Whitney Canada PT6A Series engines.

schuyler
Télécharger la présentation

MORE Instructions For Continued Airworthiness

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MORE Instructions For Continued Airworthiness Left mouse click to move to next slide.

  2. BACKGROUND There are a total of eight MORE STCs applicable to thirty different models of Pratt & Whitney Canada PT6A Series engines. The STCs are designed to require the engine to meet a specified initial entry condition. The engine’s condition shall be continually monitored there after and maintained through specific inspections, maintenance tasks, and on condition monitoring. The MORE STCs are approved FAR 33.4 Instructions for Continued Airworthiness (ICA) intended to supplement specific sections of the Pratt & Whitney Canada (P&WC) PT6A maintenance manual.

  3. Use of these Instructions for Continued Airworthiness (ICA) provides for hot section inspection (HSI) interval on condition and time between overhaul (TBO) interval to 8000 hours. The ICA supersedes the need for compliance with the HSI and TBO intervals defined in P&WC PT6A Service Bulletin Number 1003.

  4. How it works The MORE STCs require an on-condition monitoring system that includes: repetitive inspections, oil and oil filter analysis, engine performance checks, borescope inspections, and vibration analysis as some of it’s major components.

  5. GENERAL INTRODUCTION The MORE Instructions for Continued Airworthiness are a set of directions for maintaining the aircraft engine in a safe and durable condition. The MORE Instructions for Continued Airworthiness provide an aggressive repetitive inspection system.

  6. The purpose of the inspections, which are included in the MORE Instructions For Continued Airworthiness, is to look for problems in the engine. When problems are found, they are to be corrected promptly. After the problem is corrected the engine may return to flying status.

  7. GENERAL INTRODUCTION (continued) The engine is subjected to an Initial Entry Inspection. This inspection is used to determine the condition of the engine and to initialize the engine with respect to the MORE STC.

  8. GENERAL INTRODUCTION (continued) After the engine has completed the “Initial Entry Inspection”, there are repetitive (periodic) checks and inspections which must be performed.

  9. GENERAL INTRODUCTION (continued) The Initial Entry Inspection establishes baselines that are used for comparison evaluations at each additional inspection interval, so that the health, and changes to the health of the engine can be determined.

  10. GENERAL INTRODUCTION (continued) A “MORE Scheduled Inspection Status Sheet” is provided with each STC. It describes those tasks that need to be performed, it states when the tasks where last performed and when they need to be repeated. These inspections are to be recorded in terms of TSO.

  11. GENERAL INTRODUCTION (continued) A “MORE Scheduled Inspection Status Sheet” is also provided in an electronic spreadsheet format, using Microsoft Excel. A printed copy of this spreadsheet should be maintained in the engine records.

  12. GENERAL INTRODUCTION (continued) Engines using MORE Instructions for Continued Airworthiness must still comply with all applicable Federal Aviation Administration Airworthiness Directives. The rotor component service lives defined in P&WC S/B 1002, latest revision, are to be complied with, and are not superseded by the module repair intervals defined in the MORE STC. P&WC S/B 1002 applies to the largest number of engine models, but P&WC S/B 1302, 1402, 3002, 12002, and 12102 apply to some engine models using the MORE Instructions for Continued Airworthiness.

  13. The procedures should include but are not limited to: • How the operator will ensure compliance with the requirements of the STC. • The title of the person(s) responsible for performance of the various elements of the STC. • The name of the person(s) responsible for the STC management. • The procedures for recognition of adverse trends and revision of inspection frequencies or requirements resulting from maintenance findings. • When adverse trends are recognized the objective is to shorten inspection intervals and / or to tighten inspection requirements in order to more closely monitor the engine and to prevent deterioration from progressing to an unsafe condition.

  14. Operators must maintain all records and reports necessary to demonstrate continued compliance with the MORE STC.

  15. Inquiries Questions or comments concerning FSAW 94-48, this power point presentation, and / or MORE STCs should be directed to: MORE company, inc. Headquarters, 775-782-3346 or info@morecompany.Net pacific time. MORE company, inc. Engineering office, chief engineer, Ralph Hawkins, call 781-828-0451 eastern time. MORE website: www.Morecompany.Net

  16. MAKING AVIATION SAFER AND MORE RELIABLE

More Related