1 / 17

Exam / Homework

Exam / Homework. Exam 1 in Class 10 Open book / open notes HW3 due next class HW4 will be on-line soon. Finishing Chapter 2 of K&R. We will go through Chapter 3 very quickly. Not a lot is new. Read K&R through Chapter 4.2. Questions?. Convert Upper Case to Lower.

Télécharger la présentation

Exam / Homework

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Exam / Homework • Exam 1 in Class 10 • Open book / open notes • HW3 due next class • HW4 will be on-line soon. • Finishing Chapter 2 of K&R. We will go through Chapter 3 very quickly. Not a lot is new. • Read K&R through Chapter 4.2. • Questions?

  2. Convert Upper Case to Lower int lower(int c) /* this is function tolower(int c) if #include <ctype.h> (see K&R, App. B2) */ { if (c >= 'A' && c <= 'Z') return c – ‘A’ + ‘a’; /* c - 'A' is letter number... */ /* ...where ‘A’ = 0, so c -'A' + 'a' is corresponding lower case letter */ else return c; }

  3. Declarations and Initialization Section 2.4. int x, a[20]; /* external vars, initialized to zero */ int w = 37, v[3] = {1, 2, 3}; /* happens once */ int main (void) { . . . /* contains frequent calls to func */ } void func (void) /* entered 1000 times per second */ { int y, b[20]; /* automatic -- contains junk on entry */ int s = 37, t[3] = {1, 2, 3}; /* happens on each entry */ }

  4. C language Characteristics • C language never does a possibly significant amount of work without this being specified by the programmer • Initialization is not done unless programmer codes it in a way that causes the initialization to be done

  5. Casts K&R Sect 2.7 char c1, c2 = 15; int j = 2379; float g = 12.1; printf ("%d\n", c2 + j); /* what type, what printed ? */ ( int, 15 + 2379 = 2394 ) c1 = j; /* what type, value of c1? */ ( char, 2379 % 256 = 75 ) printf ("%d\n", c1 + c2); /* what type, value printed? */ ( char, 90 )

  6. Casts K&R Sect 2.7 printf ("%d\n", (char) j + c2); /* value? */ ( 90 ) printf ("%9.1f\n", j + g); /* type, value? */ ( float, 2379. + 12.1 = 2391.1 ) printf ("%d\n", j + (int) g); /* type, value? */ ( int, 2379 + 12 = 2391 )

  7. Increment / Decrement Operators Section 2.8. • Both ++n and n++ have effect of n = n + 1; • Both --n and n-- have effect of n = n – 1; • With ++n or --n in an expression • n is incremented/decremented BEFORE being used • With n++ or n-- in an expression • value is used THEN n is incremented/decremented int arr[4] = {1, 2, 3, 4}, n = 2; printf("%d\n", arr[n++]); /* values printed? */ printf("%d\n", arr[--n]); printf("%d\n", arr[++n]);

  8. Increment / Decrement Operators • Precedence, pg. 53, specifies the binding order, not the temporal order. Consider two statements: n = 5; m = n-- + 7; • In second statement, binding is: m = ((n--) + 7); • But value of n-- is evaluated last • Uses value 5 for n in evaluation of the expression • The value of n is not decremented to 4 until the ENTIRE EXPRESSION has been evaluated (in this case, the right side of assignment statement) • Temporal order of execution is not specified by binding order of operators in precedence table

  9. Increment / Decrement Operators • In fact (experiment), hard to predict sometimes int n = 3; n = (n++)*(n++); /* bad practice */ • Do we get 3*3+1+1 = 11? It might be different on different machines and compilers, so don't do this! • When we did this with “gcc” last semester, we got 11! • With “gcc” on our systems now, we get 9!   • printf ( "%d %d\n", n, n++); /* unclear what is printed */ • Which expression is evaluated first? • Second expression is evaluated first, so we get 10, 9!

  10. Bit-wise OperatorsSection 2.9 • We’ve already covered these, but they can be difficult when using them for first time • Bit-wise Operators & bit-wise AND | bit-wise inclusive OR ^ bit-wise exclusive OR ~ one’s complement << left shift >> right shift

  11. Bit-wise Operators • Masking is the term used for selectively setting some of the bits of a variable to zero & is used to turn off bits where “mask” bit is zero n = n & 0xff resets all except 8 LSBs to zero | is used to turn on bits where “mask” bit is one N = n | 0xff sets all LSBs to one

  12. Bit-wise Operators • Other tricks with bit-wise operators ^ can be used to zero any value n = n ^ n sets value of n to zero ~ can be used to get the negative of any value n = ~n + 1 sets value of n to –n (2’s compliment)

  13. Get a Group of Bits • Get a bit field of n from position p in value (put in least significant bits with zeros above) unsigned getbits(unsigned x, int p, int n) { return (x >> (p+1-n)) & ~(~0 << n); } 7 6 5 4 3 2 1 0 Position p n Bits

  14. Assignment OperatorsSection 2.10. • i += 3 means i = i + 3; • We can also use other operators int i = 3; i += 3; /* value now? */ ( 6) i <<= 2; /* value now? */ (24) i |= 0x02; /* value now? */ (24 = 0x18. 0x18 | 0x02 = 0x1a)

  15. K&R Exercise 2-9 • x &= (x-1) sets the rightmost 1-bit to a 0 • char x = 0xa4 has bits 10100100 x = 10100100 & x-1 10100011 x = 10100000 & x-1 10011111 x = 10000000 & x-1 01111111 x = 00000000 Bits all counted • What about char x = 0?

  16. Conditional ExpressionsSection 2.11 • Example: To implement z = max(a, b) if (a > b) z = a; else z = b; • As long as both sides of if statement set only one variable value, it can be written: z = (a > b)? a: b;

  17. Conditional Expressions • Can also nest conditionals: z = (a > b)? a: ((x < y)? b: 0); • Can include conditions inside an expression (e.g. to print EOL every 10th value or at end): for (i = 0; i < n; i++) printf(“%6d%c”, a[i], (i%10 == 9 || i == n-1) ? ‘\n’ : ‘ ’);

More Related