1 / 17

Ch. 15 Connecting LANs

Ch. 15 Connecting LANs. 15.1 Connecting Device. Five different categories of connecting devices Passive hub, Repeater, Bridge, Router, Gateway. Passive Hubs and Repeaters. Passive hubs Connects wires Can be considered as a part of transmission medium Repeaters

swain
Télécharger la présentation

Ch. 15 Connecting LANs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ch. 15 Connecting LANs

  2. 15.1 Connecting Device • Five different categories of connecting devices • Passive hub, Repeater, Bridge, Router, Gateway

  3. Passive Hubs and Repeaters • Passive hubs • Connects wires • Can be considered as a part of transmission medium • Repeaters • Operates only in the physical layer • Connects “segments of a LAN”-- segments are considered as a single LAN • Forwards every frame by regenerating signals (not by amplifying)

  4. Function of Repeater • Active hub = multiport repeater (often used to create a physical star topology) Single LAN

  5. Bridges • Operate both in the physical and data link layer • Can check the physical (MAC) addresses • Decide if the received frame should be forwarded to the other side or dropped  Filtering

  6. Transparent Bridges • Stations are completely unaware of the bridge’s existence • Frame must be forwarded  Forwarding • Forwarding table is automatically updated  Learning • Only one path exists between two stations  No looping

  7. Learning

  8. Loop Problem

  9. Spanning Tree • Loop-free graph that connects all stations • A LAN can be reached through one path only • Often, find a spanning tree that minimizes some cost (e.g., # hop distance, delay, bandwidth, etc) • Steps to find a spanning tree: • Elect a root station (e.g., station with smallest ID) • Find the shortest (= minimum cost) path from each station to the root • Based on the found paths, set forwarding ports and blocking ports • Can be found automatically by dynamic algorithm

  10. Finding a Spanning Tree

  11. Forwarding and Blocking Ports

  12. Bridge • An alternative way to prevent loop: Source routing • A sending station defines the bridges that the frame must visit • The addresses of all the bridges are included in the frame • Issues in bridging different LANs • Frame format • Frame size • Data rate • Bit order • Security • Multimedia support

  13. Switches • Two-layer switch (or Layer-two switch) • E.g., bridges • Three-layer switch (or Layer-three switch) • Often called “router” • Uses network layer info: logical address (IP) • Gateway • Some use gateway and router interchangeably • Gateway usually operates in “ALL layers” including application layer

  14. 15.2 Backbone Networks • A backbone network connects several LANs • Bus, or star backbone • Connecting remote LANs:use point-to-point links

  15. 15.3 Virtual LANs • Virtual local area network (VLAN) • A local area network configured by software (not by physical wiring) • VLANs group stations that connected to different switches, and create broadcast domain (or membership for grouping) • Stations can be re-grouped by software configuration • Advantages • Cost and time reduction • Creating virtual work groups • Security

  16. Example

  17. Homework • Exercise • 12, 16, 20

More Related