1 / 18

Comprehensive ITER Approach to Burn

Comprehensive ITER Approach to Burn. L. P. Ku, S. Jardin, C. Kessel, D. McCune Princeton Plasma Physics Laboratory SWIM Project Meeting Oct. 15-17, 2007 Oak Ridge National Laboratory.

temima
Télécharger la présentation

Comprehensive ITER Approach to Burn

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Comprehensive ITER Approach to Burn L. P. Ku, S. Jardin, C. Kessel, D. McCune Princeton Plasma Physics Laboratory SWIM Project Meeting Oct. 15-17, 2007 Oak Ridge National Laboratory

  2. A comprehensive simulation of an ITER discharge has been completed. Plasma states obtained are being used for testing various aspects of IPS. • Using IPS/EPA we have carried out an ITER discharge simulation (a hybrid scenario) using NUBEAM and TORIC for the beam and RF calculations, respectively, via the alternate internal coupling method. • We use this comprehensive ITER approach to burn to • test coupling to sophisticated source models in TRANSP • compare with previous calculations with analytic models • provide plasma states for IPS to run in re-play mode for • component development and testing, • comparative studies for resolution requirement, and • testing porting to new computer platforms of other components.

  3. Outline of Presentation • Approach to ITER discharge simulation • EPA in IPS • EPA internal coupling to TRANSP (client-server) • TSC & EPA • Physics models and results • discharge scenario • source and current drive models • summary of results • Improvements, targets and plans

  4. Plasma State RF/Beam Source Equilibrium & Profile Advance Dist. Function MHD Stability Electric Fields & Others Controller In normal mode of operation the equilibrium and profile advance (EPA) component communicates with others via the plasma state and the controller.

  5. EPA -- TSC control evolve sources heating & currents NB, RF, fusion products advance free-bndy equilibrium advance profiles However, there is an option in EPA which uses models in TRANSP to calculate the source and current drive in conjunction with the equilibrium and profile evolution. Plasma State equilibrium profiles equilibrium profiles sources sources signal file passing TRANSP Init, step, save, kill request control receive ready, error

  6. The engine driving EPA is the Tokamak Simulation Code TSC. • TSC performs free-boundary self-consistent transport evolution in any part of a tokamak discharge. • TSC models PF coils and 2-D passive structures with circuit equations. Arbitrary power supply models can be used. • TSC runs with feedback control systems • radial position, vertical position, Ip, and shape • sensors and reconstructions • stored energy, current profile, etc.

  7. Using internal coupling to TRANSP initially facilitates the development of other components in ISP. • TRANSP has several high fidelity source models • NB - NUBEAM (orbit following Monte Carlo) • ICRF - TORIC/SPRUCE (full wave), CURRAY (ray-tracing) • LH - LSC (ray-tracing 1D Fokker Planck) • EC - TORAY (ray-tracing, relativistic) • -particles (orbit following Monte Carlo) • TRANSP runs in “interpretive” mode for experimental analysis, but this same approach has been modified to run in “predictive” simulations by passing T(), n(), q(), and equilibrium geometry.

  8. The case study is a “hybrid” scenario • Discharge scenario – off-axis beam and ICRF heating: • 3 s ≤ t ≤ 250 s • pre-programmed: zeff, ne, Ip; flattop @ t~240 s • ne20=0.924 @ t=240 s • Zeff=1.2 (t<50 s), 1.8 (t<150 s) , 2.2 (t>150 s) • Ip=12 MA @ t=240 s • total internal energy clamped at 450 MJ • particle confinement time=25 s • energy confinement • t< 50 s Coppi/Tang profile consistent model • t 50 s relaxed GLF23 and neo-classical Flux contours for the free-boundary equilibrium @250 s B=5.3 T,R=6.2 m, a=2.0 m, e=1.8, d=0.45 b=1.77%, bp=0.74, q(0)=1.17, q(1)=4.30

  9. Models for heating and current drive • Neutral beams • off-axis (beam tangency 5.295 m), 1st beam on @ 10s, with partial power and @ 50s with full power, 2nd beam on @ 110 s. Co, 1 MeV D, full power 16.5 MW. • NUBEAM, sample size=1000. • ICRF • 1 antenna, 20 MW, 52.5 MHz on @ 170 s, 3He minority (0.001), power level regulated by the total internal stored energy. • TORIC, 31 poloidal modes, 128 radial, 64 angular grids • Alpha particles • Monte Carlo fast ion slowing down, sample size=1000. • Source integration time – 25 ms.

  10. Time Evolution of Power Balance Total ICH+Beam Beam 1+2 a Beam 1

  11. 500000 150000 400000 300000 100000 200000 50000 100000 0.2 0.0 0.4 0.8 1.0 0.6 0.2 0.0 0.4 0.8 1.0 0.6 150000 150000 100000 100000 50000 50000 0.2 0.0 0.4 0.8 1.0 0.6 0.2 0.0 0.4 0.8 1.0 0.6 t=150 s t=250 s Pheat (Watts/m3) Pheat (Watts/m3) <J·B>/<B·B> (A/Weber) <J·B>/<B·B> (A/Weber) rho rho

  12. Time Evolution of Central Temperatures ICH (20 MW) 2nd beam (16.5 MW) 1st beam (16.5 MW) electron 1st beam (8 MW) Decrease due to increased Zeff Ion 1st beam (5 MW)

  13. Time Evolution of Current Drives Pre-programmed plasma current

  14. Temperature, Density and q Profiles at t=250 s Te Ti

  15. ne ni

  16. Requested power Some simulation results during the first 50 s of an ITER discharge with beam turned on at t=10 s.Note the loss of power for t<15 s before the plasma is fully developed.

  17. Requests of Improvement, Targets and Plans • Simulation under full IPS control • Ease of use • readily accessible to users (Kessel, Budney, and others) • having templates setup for machines (ITER, KSTAR, JET, NSTX, CMOD, DIII) • Options for NBI and a-particle slowing down • NUBEAM, Bounce-averaged FP (ACCOME?), ASTRA package • Options for ICRF • TORIC, AORSA (full wave), GENRAY (ray-tracing) • Options for LHCD • LSC/ACCOME, GENRAY (1D FP), GENRAY/CQL3D (2D FP) • Options for EC • TORAY, GENRAY, GENRAY/CQL3D • Routine use of stability codes • PEST, BALLON, DCON • NOVA-K • Implement redistribution of fast ions • from sawtooth • from other MHD modes

  18. Improvements, Targets and Plans (cont.) • EPA enhancement • Add prediction of plasma rotation profile • requires sources from all sources • requires options for momentum transport • Improve density prediction • 3 hydrogen species and impurity • pellet fueling model • Include fast ion pressure in equilibrium evolution • Implement new GLF23 (TGLF23, available in Dec) and standardized transport interface • needs to be in parallel (10-100 processors) • Implement options for edge pedestal model (including ELMs) • Porting and benchmarking on Jaguar • Implement interface with machine description files • Application of IPS/EPA to additional ITER discharge simulations • ELMy H-mode • Q(0) ≤ 1, useful for testing sawtooth handling in IPS • Steady-State • High bn, stability • Study sensitivity to resolution, calling frequency, etc.

More Related