1 / 39

Using the MiniRAE 3000

Using the MiniRAE 3000. MiniRAE 3000 & ppbRAE 3000. Agenda. Self-cleaning User Interface Turning on the MiniRAE 3000 Recommended Daily Start-up procedure Hygiene mode & displays Alarm signals Programming mode Charging station. MiniRAE 3000: Self-Cleaning.

Télécharger la présentation

Using the MiniRAE 3000

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Using the MiniRAE 3000

  2. MiniRAE 3000 & ppbRAE 3000

  3. Agenda • Self-cleaning • User Interface • Turning on the MiniRAE 3000 • Recommended Daily Start-up procedure • Hygiene mode & displays • Alarm signals • Programming mode • Charging station

  4. MiniRAE 3000: Self-Cleaning Patented RAE Systems Breakthrough! • Lamp runs for 4 hours during charging • Generates small amounts of ozone to scrub sensor and lamp clean • Without probe user will see lamp glow purple during charging • Increases lamp life • Drastically increases PID stability and reduces requirement for cleaning (Refer to TN-165)

  5. MiniRAE 3000: Self-Cleaning duty-cycle Normal operating pump Pump during duty-cycle • Normal operation, pump shows inflow and outflow • Duty-cycle, pump shows inflow and pump stopped • With pump stopped, lamp generates small amounts of ozone which helps to scrub sensor and lamp clean • Pump starts, dirt is removed from lamp • Drastically increases PID stability and reduces requirement for cleaning (Refer to TN-165)

  6. User Interface LEDs and flashlight • User Interface: • Y/+: tests alarms • N/- • MODE (on) • Flashlight on/off key Display MODE key Flashlight on/off key

  7. Control Buttons • Y/+ always controls left-hand response & increases numerical values • N/- controls right-hand response & moves to next digit • MODE controls center & returns to previous menu

  8. Start-up: Turning On • Press and hold • Release Mode key • Self-test • Final display

  9. Start-up: Programmable Zero calibration • Unit performs Zero calibration after warm-up • “apply zero gas…” • If in fresh air, the M3K can be calibrated, • The ppbRAE 3000 needs Zero grade air, or a Zeroing kit

  10. Start-up: Lamp Alarm • “Lamp” alarm may occur on start-up • This indicates that PID lamp has failed to light • Wait 1-2 minutes • If “Lamp” message remains, turn off MiniRAE 3000 and restart • “Lamp” alarm clears and MiniRAE 3000 is ready for use • If after restart, “Lamp” message remains, the PID needs service

  11. Start-up: Humidity Check • It is important to check if the instrument responds to moisture • Cup hand over inlet or breathe into inlet for 10-20 seconds • Do not block flow • If M2K reads >2 ppm or ppbRAE reads >500 ppb, then the sensor needs cleaning

  12. Hygiene/Search Mode Two main operating modes: • Hygiene Mode: The factory default mode. After warm-up the meter samples continuously • Search Mode: After warm-up the pump shuts off and “Ready…” is displayed.

  13. Hygiene Mode/Basic User *Dashed (- - -) line is automatic return

  14. Hygiene Mode/Advanced User *Dashed (- - -) line is automatic return

  15. Hygiene Mode/Advanced User • Change reference gas without entering Programming Mode • Change measurement gas when reference gas is Isobutylene

  16. Hygiene Mode • Reading in ppm • Gas information • Calibration needed • Wireless status • Battery status • Datalog • Pump Status • Press N/- to move to next screen

  17. TWA/STEL/PEAK • TWA reading • STEL reading • Peak reading • Press Y/+ to clear • Press N/- to move to next screen

  18. Date/Time/Temp • Date • Time • Internal temperature • Press N/- to move to next screen

  19. Gas Display • Calibration Gas • Measurement Gas • Correction factor • Press N/- to move to next screen

  20. PC Communication • Enter PC communication and stop sampling • Press Y/+ to enter PC Comm mode • Press Y/+ to exit after communication is complete • Press N/- to move to next screen

  21. Alarm signals

  22. Search Mode • A discrete sampling mode can easily start/stop datalogging for many points • Perfect for drum or headspace sampling • Optional graphic screen

  23. Optional Graphic Screen • Using ProRAE Studio, set display to graphic display Or • Leave display in ppm reading

  24. Search Mode/Basic User *Dashed (- - -) line is automatic return

  25. Search Mode/Advanced User • Change reference gas without entering Programming Mode • Change measurement gas when reference gas is Isobutylene

  26. Programming Mode • Press and Hold N/- and MODE to enter Programming • Input password “0000” • Or Press MODE

  27. Programming Mode • Navigate using interface of “Select,” “Back,” and “Next” • Press “MODE” to exit Programming • Y/+ to increase numerical values or confirm a question • N/- to decrease numerical values or deny a question

  28. Two-Point Calibration *Dashed (- - -) line is automatic return

  29. Zero calibration • Press Y/+ to select Zero Calibration • Press MODE to return to main display • Press N/- to select Span Calibration

  30. Zero calibration • If in fresh air, the M3K can be calibrated, • The ppbRAE 3000 needs Zero grade air, or a Zeroing kit • Press Y/+ to start calibration

  31. Span Calibration • The menu will return to calibration selection with Span Calibration highlighted • Using a Matched-flow regulator, tedlar bag, or 500 cc/min regulator, attach 100ppm Isobutylene for the MiniRAE 3000 or 10ppm Isobutylene for the ppbRAE 3000 • Press Y/+ to enter Span calibration. • Press N/- to skip Span calibration and return to Zero calibration. • Press MODE to exit and return to the top calibration menu.

  32. Span Calibration • Turn on your span calibration gas. • Press Y/+ to initiate calibration. • Press N/- to abort calibration

  33. Span Calibration • Calibration is complete when instrument reads: Span 1 is done! Reading = xxx. ppm • Instrument then returns to Zero Calibration menu • Select MODE to return to regular Operations • Instrument will then update settings

  34. Power Off • Hold for full 3 seconds • Audible alarm will beep and unit will countdown 5 seconds • Release when you see “Unit Off…” • Unit will stay on if you release MODE key before countdown completes

  35. Charging unit • To Charge unit • Push instrument down on charger • Set back of unit against back wall of charger • To remove unit from charger • Push down on instrument • Pull unit towards you

  36. Removing battery • Rubber boot stays on monitor • First push down on tab • Then pull battery from instrument

  37. Charging battery • Use back of charging station to charge battery externally • Push into contacts • Lay battery flat • To remove battery • Push battery towards station • Lift battery off of charging station

  38. Maintenance • Clean PID Lamp & Sensor • When display creeps upwards after good zero • When PID responds to moisture • When movement of PID results in response on display Clean Sensor Dirty Sensor Bias Electrode Bias Electrode Sensing Electrode Sensing Electrode No dirt build-up to foster a decrease in airspace resistance Dirt build-up absorbs water and breaks down airspace resistance leading to sensor “leakage” or moisture response

  39. Questions? www.raesystems.com Service: 888-723-4800 Sales: 877-723-2878

More Related