1 / 47

fluidyn FLOWCOAST FLOOIL

fluidyn FLOWCOAST FLOOIL 3D Fluid Dynamics Model to Simulate Oil slick movement in coastal waters or rivers. FLOOIL. INTRODUCTION :. FLOOIL 3D Fluid Dynamics model to Simulate Flow and Oil transport in water bodies like river, estuaries and coastal area.

uriel
Télécharger la présentation

fluidyn FLOWCOAST FLOOIL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. fluidynFLOWCOAST FLOOIL 3D Fluid Dynamics Model to Simulate Oil slick movement in coastal waters or rivers FLOOIL

  2. INTRODUCTION : FLOOIL 3D Fluid Dynamics model to Simulate Flow and Oil transport in water bodies like river, estuaries and coastal area. It uses Computational Fluid Dynamics tools in a finite difference based approach to solve the differential equations governing mass, momentum and energy transfer. Finite Difference scheme has been used to compute the mass fluxes and oil spill transport. The effects due to wind at the surface and bed roughness at the bottom have been taken into account. FLOOIL has built-in models to account for density variation due to Oil Spill and BFC Grid Generation technique to take into account the curved flow boundaries. FLOOIL

  3. FLOOIL can be used for simulating oil slick movement by considering the transportation of an oil slick due to advection spreading-evaporation and dissolution. FLOOIL can also consider the lateral flows and Oil discharges joining the flow domain at any location. The model can also be used for varying boundary values over the time at user specified locations. FLOOIL has special features to analyze time dependent velocity fields, Oil spill movement and water levels at user specified location. FLOOIL

  4. MODELING FEATURES FLOOIL

  5. Automatic BFC grid generation • Implicit higher order finite difference scheme • Oil discharge into main river reach at any location • Boundary condition at user specified locations • Time varying boundary condition • Lagrangian model for oil slic removal: including effect of wind, dissolution, evaporation, emulsification FLOOIL

  6. Pre-processor : • Digitization of domain, terrain, objects and meteorological stations by loading the BMP map. • Save / Load terrain, meteorological, Oil sources and result files both in ASCII and BINARY format. • Update the Oil database through menu. •   Load meshes in different formats load objects in Auto CAD DXF format • Interactive selection of models. • Loading either data in NWS format and in user-defined format. • Interactive specification of boundary conditions. • Manual control over simulation options. FLOOIL

  7. Post-processor : ( Viewing the Terrain with object masking facility ) • Grid plots, Vector plots. • Contour plot / Surface plots : line and filled. • Plots of variables with distance on a plane. • Trace plots of variables at monitor points. • The values of a variable at any grid points. FLOOIL

  8. Applications : • Navigational purpose. • River maintenance works. • Oil-slick transport. Purpose of the software in the field of the following areas : • Coastal region. • Seas, rivers and estuaries. • Petro-chemical industries. FLOOIL

  9. Menu Driven • User – Friendly • Easy to Use • Online Help User Interface : FLOOIL

  10. GRAPHICAL MENU INTERFACE FLOOIL

  11. File Operations • Load or Save Files in ASCII / BINARY Format FLOOIL

  12. Topography Terrain Features Options FLOOIL

  13. Flow Fluid Properties FLOOIL

  14. Oil Characteristics FLOOIL

  15. Spill Process Spill Mechanism FLOOIL

  16. Shore Type Nature of River bund FLOOIL

  17. Simulation Output Options Flow parameters ( Velocities in X, Y, and Z directions) at start of Simulation. FLOOIL

  18. View Landscape FLOOIL

  19. View Velocity Vectors FLOOIL

  20. View Contours filled mode FLOOIL

  21. View Contours line mode FLOOIL

  22. View Grid ( 1D, 2D or 3D) FLOOIL

  23. View Grid out ( Outer boundary of mesh ) FLOOIL

  24. View Graphs FLOOIL

  25. INPUT DATA REQUIRED FLOOIL

  26. Topography of Water body. • Fluid Properties. • Flow Boundary Conditions . • Chemical and Physical Characteristic of Oil Spill. • Type of the Oil Source ( point, line, area or volume). • Shore Type (like sand and Grave, Rock Shore ) . FLOOIL

  27. OUTPUT FLOOIL

  28. Generated Grid and Bathymetry. • Velocity vectors throughout the domain . • Contours (lined and filled) . • Water level variation and Velocities . • Contours of Oil Slick throughout the Domain. • Graphical representation velocities, water levels and oil slick. FLOOIL

  29. Oil Slick in River Thamesnear Coryton Case Study FLOOIL

  30. Introduction: • The main objective of the study is to analyze the fate of a large quantity of Crude oil spillage into the River Thames • The Oil spill is due to the shipwreck of an Oil Tanker • The location of the spillage is near Coryton • The flow in River Thames varies with the tidal cycle FLOOIL

  31. Map of the region around the Spillage Site along the River Thames (from Canvey Island to Tilbury) FLOOIL

  32. Digitization of the Topographical/Hydrological features on the Map into FLOOIL FLOOIL

  33. Topographic/Hydrographic details: • The maximum bathymetric depth in the river stretch considered for this study is 14.8 m • The bathymetry is assumed to be sandy with a D50 of 1.5 mm • The Manning’s Roughness coefficient is assumed as 0.1 • Unsteady flow boundary Conditions, varying with tidal cycles, are used here. FLOOIL

  34. Bathymetry Generated by FLOOIL(Using bathymetric contours) FLOOIL

  35. Spill Details: • Spilled Liquid : Crude Oil • Amount of Spill : 1000 tons • Spill Location : Near Coryton • Oil Density : 900 Kg/m3 (at 150 C) • Kinematic Viscosity of Oil : 0.00134 m2/s • Surface Tension : 30 dynes/m • Ambient Air Temperature : 130 C • Dissolution Constant : 0.0088 (g.m2.hr)-1 • Decay constant : 0.5 d-1 The source of spillage is assumed as an underwater pipeline of size 18 inches, carrying Crude oil . FLOOIL

  36. Location of Oil Slick FLOOIL

  37. Simulation Parameters: Computational Grid: 3-D Mesh of size 72 X 10 X 3 Duration of the Study: 3 days (72 hours) Flow Boundary Conditions: The boundary conditions were taken between Tilbury and Coryton (the flow variations due to the tidal cycles were taken into consideration) Removal Mechanisms Considered: All (Advection, Diffusion, Mechanical Spread, Dissolution, Evaporation, Shore Deposition and Emulsification) FLOOIL

  38. 2-D View of the Computational Grid FLOOIL

  39. 3-D View of Computational Grid FLOOIL

  40. Flow Velocity Vectors after 2 hrs of Simulation FLOOIL

  41. Flow Velocity Vectors after 4 hrs of Simulation FLOOIL

  42. Flow Velocity Vectors after 6 hrs of Simulation FLOOIL

  43. Flow Velocity Vectors after 8 hrs of Simulation FLOOIL

  44. Oil Volume (in m3) after 2 hrs of Simulation FLOOIL

  45. Oil Volume (in m3) after 4 hrs of Simulation FLOOIL

  46. Oil Volume (in m3) after 6 hrs of Simulation FLOOIL

  47. Oil Volume (in m3) after 8 hrs of Simulation FLOOIL

More Related