1 / 12

X.Li, A.Bolhovitins, R.Timoney, P.Harkness, M.Lucas University of Glasgow, UK

1 st Space Glasgow Research Conference , Glasgow, UK, 28 October, 2014. Modelling and Experimental Validation of a Novel Ultrasonic Planetary Core Drill (UPCD) Tool Design. X.Li, A.Bolhovitins, R.Timoney, P.Harkness, M.Lucas University of Glasgow, UK. Outline. Background UPCD Assembly

walden
Télécharger la présentation

X.Li, A.Bolhovitins, R.Timoney, P.Harkness, M.Lucas University of Glasgow, UK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 1st Space Glasgow Research Conference, Glasgow, UK, 28 October, 2014 Modelling and Experimental Validation of a Novel Ultrasonic Planetary Core Drill (UPCD) Tool Design X.Li, A.Bolhovitins, R.Timoney, P.Harkness, M.Lucas University of Glasgow, UK

  2. Outline • Background • UPCD Assembly • Numerical Model • Simulation Results • Conclusions

  3. Background NASA – Jet Propulsion Laboratory (JPL) SELEX GALILEO – ExoMars Mission Ultrasonic/Sonic Driller/Corer (USDC) operated from the Sojourner platform Conventional Driller/Corer

  4. Background Compared with conventional drilling/coring, USDC has the following advantages: • Light-weighted, compact, low pre-load, low power • Operate with a minimum axial load and holding torque which is suitable for low gravity environments • Operate at extreme temperatures • Avoid drill bit jamming, breaking, dulling etc • Capable of drilling a wide range of rocks UoG/MP Drill in Tenerife 2011

  5. UPCD Assembly

  6. UPCD Assembly

  7. UPCD Mechanism • Due to piezoelectric effect, piezoceramic rings convert high frequency voltage into ultrasonic vibration at the transducer base, and the level is adjustable depending on the power consumption. • A tapered horn is used to amplify the vibration and ensure a considerable level of vibration at the horn tip • The ultrasonic transducer assembly drives a free flying mass which bounces between the horn tip and the base of drill stems at sonic frequencies. • The chaotic motion of the free mass create stress which propagates through the drill stems to the rock surface, rock fractures once stress exceeds the compressive limit • Three drill stems will be used with each length 10cm. UPCD assembly target mass is 7kg, target power consumption 40W.

  8. Numerical Model UPCD assembly dynamic equations:

  9. Simulation Results

  10. Simulation Results

  11. Conclusions • A novel driller/corer device has been developed with the USDC mechanism however employs two compression springs for different purposes • Dynamics of the UPCD process has been modelled and analysed, compression spring rates are optimized which delivers the maximum effective impulse from the drill to the rock • Experiments with dual springs are currently being performed which allows to validate the simulation results • A 1/2 wavelength ultrasonic transducer has been designed to decrease the weight and length of the UPCD assembly

  12. Thank you !

More Related