1 / 1

Center for Diagnostic Imaging workstation - SCUHS

In order to DICOM-Send to us you’ll need to add my site information to your list of DICOM-Send destinations. How to add my DICOM-SEND destination in omni-vue then read the PDF and follow these steps. Visit: https://bit.ly/2zbbPhD

Télécharger la présentation

Center for Diagnostic Imaging workstation - SCUHS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Center for Diagnostic Imaging Standard Operating Procedure Diagnostic Imaging DICOM workstation Southern California University of Health Sciences Los Angeles College of Chiropractic In order to DICOM-Send to us you’ll need to add my site information to your list of DICOM-Send destinations. AE Title: SCUHS (case sensitive) Hostname/IP Address: DICOMImaging.scuhs.edu (preferred) or: 205.151.210.49 (if numeric entry is required) Port: 4810 If you are using Omni-Vue there is a great instructional video located here http://www.genesisdigital.com/training/ that can guide you through the process of adding a DICOM-Send destination. Otherwise the following instructions can be used. HOW TO ADD MY DICOM-SEND DESTINATION IN OMNI-VUE Login into Omni-Vue Close the worklist so you’re at the screen that is mostly black with a toolbar at the top Select “Options” then “Preferences” The network tab should be selected. There is a section called “Remote”. This is where you’ll need to add my site’s DICOM send information. Select “Add” and type in the following AE TITLE: SCUHS HOSTNAME: DICOMImaging.scuhs.edu (preferred) or: 205.151.210.49 (if numeric entry is required) PORT: 4810 DESCRIPTION: SCUHS NICKNAME: SCUHS Select “Add”. To exit select “OK” HOW TO DICOM SEND A STUDY FROM OMNI-VUE To DICOM send a study from your worklist, right click on the study and choose “Send DICOM” Select my send destination and select “test” to verify connectivity. If the test is successful then choose “send”, a progress bar will indicate when the transfer is complete. If the connection test fails or you have trouble DICOM sending please call my office at 1-800-221-5222 ext 539. We’ll check to make sure things are running properly on our end. Sincerely, Hector RiveraMelo, DC, DACBR Director, Center for Diagnostic Imaging 16200 Amber Valley Drive  Whittier, California 90604  T: 562.947.8755x709  F: 562.902.3328  www.scuhealth.org Celebrating Over 100 Years of Excellence in Healthcare Education

More Related