1 / 22

Trilinear Gauge Couplings at TESLA Photon Collider

Trilinear Gauge Couplings at TESLA Photon Collider. Ivanka Božović - Jelisavčić & Klaus Mönig DESY/Zeuthen. TGCs in W-pair production - sensitive observables Measurement of anomalous   and   at a photon collider at TESLA Summary. W . . W . . W .

zalman
Télécharger la présentation

Trilinear Gauge Couplings at TESLA Photon Collider

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Trilinear Gauge Couplings at TESLA Photon Collider Ivanka Božović - Jelisavčić & Klaus Mönig DESY/Zeuthen

  2. TGCs in W-pair production - sensitive observables • Measurement of anomalous  and  at a photon collider at TESLA • Summary ECFA/DESY Linear Collider Workshop

  3. W  W  W TGCs in W-pair production - sensitive observables In order to understand the mechanism EW symmetry is broken, self interaction of the gauge bosons can be used to reveal a structure of the underlying gauge group. In particular, W-pair production at high energies is a sensitive process to the possible scenarios of EWSB. • W-pair production in  collisions is dominated by single diagram. • Due to spin-1 t-channel exchange, the cross-section for W-pair • production becomes flat in the ‘picobarn region’, above threshold up to • 1 TeV center-of-mass energy. ECFA/DESY Linear Collider Workshop

  4. High production cross section of W pairs in  collisions allows cuts to be successively applied, so the signal can be extracted with a ratio to background of 27:1 ECFA/DESY Linear Collider Workshop

  5. A potential of different observables for analysis of the anomalous TGCs has been discussed. We study the effect of anomalous dipole coupling parameter  on differential cross-sectionfor W-pair production in  collisions and on W polarization fractions reconstructed from W production and decay angle distributions. ECFA/DESY Linear Collider Workshop

  6. Measurement of triple gauge couplings in W-pair production is in principle based on several sensitive angular observables: • ‘W production angle’ - the polar angle of the outgoing W with respect to the e- beam direction • ‘W decay angle’- the angle of fermion with respect to the W flight direction, reconstructed in the W rest frame • Azimuthal angle of the fermion in the plane orthogonal to W direction, where the axes are defined in such a way that the electron beam is contained in X-W plane. These information can be combined (i.e. by using the optimal observables method) in order to determine anomalous coupling parameters. ECFA/DESY Linear Collider Workshop

  7. Tools: • SIMDET V3- A Parametric Monte Carlo for a TESLA Detector • Analytic formulafor total (differential) cross-section (E.Yehudai, Phys. Rev. D11(44)1991) based on helicity amplitudes for different initial and final states (G. Belanger et al., ENSLAPP-A-473/94, hep-ph/9405359) • WHIZARD Monte Carlo generator based on tree-level matrix elements for multi particle processes. Sample of 105 mixed W decays is generated at = 500 GeV ECFA/DESY Linear Collider Workshop

  8. The shape and the size of the total cross-section for W-pair production is dominated by transverse W mode ECFA/DESY Linear Collider Workshop

  9. TT TT/LL/LT: 99.9/0.1/0.0, =0 LL LT TT TT/LL/LT: 96.3/1.4/2.3, =0 LT LL • The cross-section to produce one L and one T W from a Jz=0 initial two-photon state is 0 in the Standard Model. • Production of two longitudinal Ws (LL) for both initial two-photon states is suppressed in the Standard Model. ECFA/DESY Linear Collider Workshop

  10. TT TT/LL/LT: 99.9/0.1/0, =0 LL LT /SM =1.01 =0.99 Although Ws from initial two-photon state Jz=0 do not exhibit a polarization structure, differential cross-section is sensitive up to 2% to 10-2 variation of parameter . This effect is more pronounced in the forward region. ECFA/DESY Linear Collider Workshop

  11. Fraction However, Jz=2state exhibits a structure over the W polar angle range. This implies that longitudinal Ws could be partially recovered in the central region. ECFA/DESY Linear Collider Workshop

  12. Differential cross-section as a function of W production and decay angle, can be used to extract the polarization fractions from simulated (experimental) data, even without identification of charges of the decay products. TT/LL/LT: 70/16/14, =0 TT LT LL (M. Bilenky et al., Nuc. Phys. B409(1993)22) ECFA/DESY Linear Collider Workshop

  13. Jz=2 ECFA/DESY Linear Collider Workshop

  14. Similarly, one-dimensional decay angle distribution can be fitted in order to determine fraction of polarization states T=TT+TL and L=LL+LT ECFA/DESY Linear Collider Workshop

  15. WHIZARD results follow the trend predicted using numerical function, however they deviated for several sigmas. • Possible explanation for it might be due to the fact that function, differently from WHIZARD, generates cross-sections for on-shell Ws. If we generated on-shell W pairs with WHIZARD as well, the numerical prediction of the function will be confirmed: TT/LL/LT, 70±3/16±1/15±1. • As well, by restricting W mass narrower around it’s nominal value (i.e. |MW|<2 (1) GeV) , the WHIZARD prediction for W mixed decays converges towards on-shell approximation. This implies that contribution from tree-level non-resonant processes to production of off-shell W pairs could possibly explain the effect. ECFA/DESY Linear Collider Workshop

  16. Fac/FSM =0.99 =1.01 Fac/FSM =1.01 =0.99 Recovering longitudinally polarized Ws (LL, LT) from initial two-photon state Jz=2, their fraction can be determined with a statistical error of order ~10-3 for an integrated luminosity of ~ 120 fb-1. This would make accessible the ~2% effect of deviation of W’s longitudinal fractions from their SM values, for anomalous =0.01 coupling. ECFA/DESY Linear Collider Workshop

  17.  = 0.90  = 1.10  = 1.01  = 0.99 Dominance of the transverse W modes even when angular cuts are imposed, makesJz=0 channel not promising to exploit the sensitivity of W polarization fractions to anomalous dipole coupling parameter . ECFA/DESY Linear Collider Workshop

  18. Acceptance 3D-Acc. Decay angle W2 Decay angle W1 Measurement of  and  From the 2D decay angle distributions of the accepted data the dipole and quadrupole coupling parameters can be fitted. The statistical error and systematic effect of the error of luminosity have been estimated. ECFA/DESY Linear Collider Workshop

  19. With an integrated luminosity of 110 fb-1 , that would correspond to one year of running TESLA photon collider at center-of-mass energy of 400 GeV, C and P conserving couplings (, ) could be measured with a statistical error of order of 10-4. ECFA/DESY Linear Collider Workshop

  20. Systematic error on dipole coupling parameter introduced by the error of luminosity of ~1% is of the same order as the statistical error. Measurement of  can not be significantly improved by more precise luminosity measurement. • By increasing a center-of-mass energy of photon collisions from 400 GeV to 800GeV, total error of these parameters can be reduced for approximately 20% (less then in e+ e- case). ECFA/DESY Linear Collider Workshop

  21. Summary • In  collisions, both differential cross-section for W-pair production (Jz=0 state) and W polarization fractions (Jz=2) are sensitive observables to anomalous dipole coupling. With an integrated luminosity of order of 100 (120) fb-1, these observables can be measured with a statistical error of 10-3. This would make accessible the ~2% effect of their deviation from the Standard Model values for anomalous =0.01 coupling. ECFA/DESY Linear Collider Workshop

  22. With an integrated luminosity of 110 fb-1 , that would correspond to one year of running TESLA photon collider at center-of-mass energy of 400 GeV,C and P conserving couplings (, ) could be measured with a statistical error of order of 10-4. • By increasing a center-of-mass energy of photon collisions from 400 GeV to 800GeV, total error of these parameters can be reduced for approximately 20%. • Taking into account the fact that the full information on W polarization structure (i.e.azimuthal angle ‘’) in not included yet into analysis, as well as more realistic simulation of data (variable photon energy spectrum), there is no yet definite answer on photon collider potential to study anomalous TGCs. ECFA/DESY Linear Collider Workshop

More Related