Tips to clean up mold

1. Tips to clean up mold digitalgpoint.com/tips-to-clean-up-mold Getting your HVAC system infested with mold is quite common, especially in areas where humidity levels are very high, and moisture keeps in the ducts. It’s simple to diagnose decay. If you witness a strange musty smell, it means that your ducts have mold. It could vary from being in just one point and severe enough to be present in vents across the home. Often the spores are too small that one can’t only get them with their naked eye, and they exclusively rely on the smell to detect it. The one thing homeowners neglect is that mold grows within minutes. It gathers its nutrition from dust and debris and even pollen and most of all animal dander that’s been collecting overtime in your vents, and you haven’t performed and Mold Air Duct Cleaning Suwanee prior. In this article, you will view signs of mold growth and tips to clean up mold effectively. Accurate signs of mold presence in your ducts Following are some definitive signs that prove mold growth in your HVAC system: 1. Must mildew kind of unpleasant smell revolving across your home. 2. You feel irritation in either your nose, throat, or eye whenever you enter an air- conditioned room. 3. You often experience allergic symptoms. 4. Unbearable headaches that immediately go away when you step outside. 5. You feel fatigued and dizzy when you are at home. 6. Visible mold growth in your air ducts and around condensation coils and drip pans. 1/3

2. Cause of mold growth Fortunately, many homeowners across the US clean the visible mold by themselves effectively. However, mold spreads infractions, and a tiny presence can become the reason for re-infestation. HVAC systems get infected because of humidity and moisture accumulation precisely. Unless you find the leading cause, that could be a leaking duct or failure of the condensation system. It’s always a never winning battle. Trust us when we say the DIY solution works only by a fraction and always has the mold’s capacity to regrow. Bathrooms are most prone because of the steam from scalding water and moisture that doesn’t flush out the vents and remains. It shows that certain areas in the home with a high humidity level create a perfect habitat for mold growth and spread. Tips for cleaning up mold Mold infestation doesn’t overwhelm many homeowners, and hence they opt for DIY options to clean up the mold in their ducts. Mold air duct cleaning can often be tricky, especially when the spores aren’t visible and witness only smell in the ducts. EPA recommends that if the mold growth is up to 10 square feet, homeowners should opt for a professional service provider instead of cleaning the mold by themselves. Here are some classic tips to clean and get rid of mold: Step 1: startup preps Safety comes first, hence to prepare yourself for cleaning mold, one should have the following: Hand gloves , Safety eye goggles Face mask Cleaning brushes with soft bristles Thick garbage bags to dispose of the mold Homemade DIY mold cleaner or store brought EPA approved chemicals Step 2: Switching off the HVAC system After prepping yourself for the cleaning, make sure that the system is entirely off. Check the switchboard and then the circuit breaker to ensure that no electrical supply is present. Next, you need to open the ducts and look for the moldy areas. Step 3: scrubbing the mold away After opening up the vents, mold air duct cleaning becomes an easier task. Start by whisking the mold with a soft brush. Ensure you have fully covered your face so you don’t inhale any tiny particles in as it can become a health hazard. Now with a high suction vacuum cleaner hose, suck out all the mold. Step 4: cleaning the duct surface 2/3

3. This step ensures that the mold has been completely eradicated from the valve. But there are often tiny pieces left behind. For this, you can scrub the surface with a microfiber cloth with a DIY homemade mold cleaner. It compromises bleach, water, and detergent, so it not only cleans away but also sanitizes the vents all along. Apart from the homemade solution, you can again go for over-the-counter mold cleaner liquids that are EPA approved and nontoxic. In this way, it can stop mold buildup for a few months, and you can rely on necessary cleaning only. Step 5: Repeat the process You can’t get rid of mold until you complete the process by opening up each register and cleaning the mold manually. So it’s essential to repeat the process in each room to get rid of mildew completely. By merely following these cleaning tips, you can achieve good indoor air quality free from any allergens and many other unseen health hazards associated with mold. 3/3