1 / 10

LCLS Undulator Collaboration Meeting

LCLS Undulator Collaboration Meeting. Safety Minute(s) Undulator Week People Schedule Budget. Geoff Pile. Safety. Integrated Safety Management (ISM) We are experienced and good at doing it - everyone is involved Don’t take it for granted that someone else is doing it

Anita
Télécharger la présentation

LCLS Undulator Collaboration Meeting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LCLS Undulator Collaboration Meeting • Safety Minute(s) • Undulator Week • People • Schedule • Budget Geoff Pile

  2. Safety • Integrated Safety Management (ISM) We are experienced and good at doing it - everyone is involved • Don’t take it for granted that someone else is doing it • Almost any incident will affect schedule one way or another • ISM 5 core functions (and there’s 7 guiding principles) • 1. Define the Scope • 2. Analyze Hazards • 3. Develop & Implement the Controls • 4. Perform the work within the controls • 5. Feed Back and improvement (on the scope)

  3. Safety • Two weeks ago – We talked about ISM at the ANL/LCLS regular group meeting • We discussed the work & the areas where it was being performed • We discussed the supervisory roles and line management responsibilities for planning work & doing inspections • We discussed the five core functions and what was applicable to our areas • Before new work in LTT started we had an issue with a janitorial exercise just a few days after discussions • Never underestimate what could go wrong! • We need to discuss and plan the safety aspects of assembly and installation as we go through this week

  4. Undulator Week • Agenda • Breakouts are really important – don’t attend scheduled talks for the sake of it. • Wednesday – Controls guys may breakout during Mechanical talks • Thursday – Mechanical guys should breakout and create issues list. BLM review with Controls and Diagnostics guys goes until early afternoon Undulator Week Close Out - Go over issues list with ALL before we break up. • View graphs • Should be minimal – this isn’t a Lehhman review (so why did I do this?) • Why do we have this week – face to face communication really resolves issues! • Next one in Early May? • I think it makes sense to do it here at SLAC again

  5. People – with weekly interactions • Dave Schultz Geoff Pile • Jose Chan Bill Berg (Integration) • Carl Rago Dean Walters • Don Schaefer Leonard Morrison • HD Nuhn Marion White • Richard M Boyce Emil Trakhtenberg • Arturo Alarcon Josh Stein • Zac Wolf Isaac Vasserman • Catherine LeCoq Horst Friedsam • Steve Smith Bob Lill • Tim Montagne Mark Jaski • Venkat Srinivasan Jim Baily • Franz Peters Jim Morgan • Georg Gassner Tony Petryla (Controls) • Eric Lundahl Greg Weimerslage • Ben Poling Mike Merritt • Bob Fuller Stan Pasky/Rich Voogd • Darren Marsh Tom Barsz/Yeldez Amer

  6. Schedule & Issues from last meeting • Some parts will be delivered later than planned • We need to Iron out delivery schedules at all WBS levels this week • Latest Estimates should be documented in every talk or breakout by the responsible technical leads. (Can use simple table for now: Master Delivery Schedule 1-17-08 gp) • Link deliveries to SLAC assembly capabilities and define optimum installation schedules

  7. LCLS Installation and Commissioning Time-Line July 13, 2007 rmb DRAFT X-Ray tunnel/FEH Install X-Rays in FEH LTU/Und/Dump FEE/NEH Install First Spont. Light CF Early Occupancy X-Ray Systems Checkout - Commission DOE approval to operate beam to NEH CD-4 7/15/2010 e- beam & Photon Systems Checkout Start Pilot Operations S O N D J F M A M J J A S O N D J F M A M J J A S O N D J F M A M 2007 2008 2009 2010 PPS PPS Photon Flux Measurements Controls checkout Re-commission Inj/BC2 to SL2 Operations LTU/Und/FEE Commissioning NEH Operations Linac/BC2 Commissioning linac/BC2 Install FEL Commissioning

  8. Issue list format (list to be updated)

  9. Budget • 1.4.1 ANL Management • LOE • 1.4.2 ANL Controls • need ~1 extra FTE of effort + M&S ~200K • 1.4.3 Magnets and Supports • Can support minor modifications during assembly • 1.4.4 Vacuum Chamber • Polishing, machining etc. ~ $200K • 1.4.5 Diagnostics • BPM windows ~ + $60K so far

More Related