Industrial Paint Preparation and Painting process
Industrial Paint Preparation and Painting process Industrial paint has two purposes First is, it provides a protective coating for the substrate against chemical and physical attack. Secondly it gives the product a pleasing appearance and increases its value. Industrial paints are pigmented liquids or powders that are used to protect and beautify substrates. Some industrial paints are applied with brushes or rollers. Others are applied with spray systems. Features of Industrial Paints u2022tAnti-static or conductive u2022tHeat resistant u2022tFire retardant u2022tRust preventive u2022tWaterproof u2022tWater repellant u2022tInterior or exterior u2022tSuitable for touch-up coatings u2022tAble to withstand high temperatures u2022tElectro-resistive - include both conductive and nonconductive materials. Industrial Painting process Step 1: Surface Cleaning The industrial painting process starts with an analysis of the surface for irregularities or problematic surface features. All surface must be first cleaned of any loose debris, chipped paint and dirt for proper adhesion of paint. The process is assessed by professionals and can vary based on each individual job. Step 2: Priming Surface Prior to Surface preparation ensure that surrounding areas are protected from overspray by carefully masking off all areas. Depending on the base material, a sealant will need to be sprayed in order to protect the surface. This process is extremely important to extend the life of metal equipment and surfaces by protecting it from rust and corrosion. Step 3: High Volume Spray Paint Painting the prepared Surface immediately avoids any potential for the newly exposed area to be contaminated ensuring optimal paint. Spray Painting works by combining the paint with air and converting the paint to tiny droplets and accelerating these out of nozzle. To guarantee no spots are missed, a brush or roller technique may be used where required. Specifications for Industrial Paints Color: Primers and finishes such as flat, satin, semi-gloss, and high-gloss are available. Coverage: Coverage is the substrate area that industrial paints can cover at a specific thickness. VOC content: VOC content is limited by government regulation and represents the amount of evaporation of carbon compounds under test conditions. Pot life: Pot life is the amount of time between the mixing stage and the gel stage in which industrial paints remain usable in a pot at 77u00b0 F. Viscosity: Viscosity measures an industrial paintu2019s resistance to flow. Specific gravity: Specific gravity is the ratio of the density of the coating to the density of the water at a specified temperature. Visit http://neopaints.co.in for Paint Manufacturers, Alkyd Resin Manufacturers, Epoxy Paint Manufacturers, Heat Resistant Paint Manufacturers, Phenolic Resin Manufacturers, Pu Paint Manufacturers, Resin Manufacturers, Industrial Paint Manufacturers, epoxy & Acrylics Coating Manufacturer, building materials manufacturers.
37 views • 2 slides
![Paint Sprayer Components [Guns, Hoses, Nozzles & Cleansing]](https://cdn7.slideserve.com/12280789/painting-material-online-sales-page-artistic-dt.jpg)
