Tenda F3 Router Setup | Configure & Connect To Computer

1. Tenda F3 Router Setup - Quick Steps Do you wish to set up a wired or wireless network in your home using the Tenda F3 router ? Have a quick look at the steps provided on this page to set up your network. The smart Wi-Fi router, Tenda F3 router setup has three external antennas to ensure hassle-free wireless connectivity over your network. The router package consists of: Tenda F3 router Power Adapter Ethernet Cable User Guide Once you have unpacked the product package, perform the steps given below. Step 1: Hardware Connection First, turn on the router by plugging it into a power outlet using the supplied power adapter. Connect a network cable between the blue WAN port of the Tenda router and your Internet modem. Using another network cable, connect the yellow LAN port of the router to the Ethernet port on your computer for Tenda F3 router setup.

2. Now, check the LED lights on the router after connection. Make sure that the SYS light on the router is blinking. If your computer supports Wi-Fi, then you can connect it to the router’s Wi-Fi using the router’s default SSID and network password. In this case, there is no need for the Ethernet cable connection. Step 2: Configure The Router Launch a web browser on your computer to navigate to the Tenda router setup page. Now, enter 192.168.0.1 (IP address of the router) in the address bar and hit the Enter key. The username and password of the Tenda router is admin. Enter the login credentials and click on the Login button. Now, you will be on the home page of the Tenda router. When the Welcome to Setup wizard Next button. Select your Internet Type and fill in the required details. Click on the Apply button. Now, click System status on the left panel. Verify the connection status if it is connected. If the connection status displays disconnected, check if the modem and router are properly connected. If the status shows connecting, click on the Refresh button. Verify the system status in the middle of the page. Select WAN IP. If the status is showing connected and WAN IP is not 0.0.0.0, you can change your router online. Click Advanced Settings on the left panel and select MAC address Clone. Select Clone MAC address and then click on the Apply button to save the settings. Your router will now restart by itself and the Tenda F3 router setup has been completed. Read more