Nanoparticle Synthesis Jimmy C. Yu Department of Chemistry Environmental Science Programme The Chinese University of Hon

1. Nanoparticle SynthesisJimmy C. YuDepartment of ChemistryEnvironmental Science ProgrammeThe Chinese University of Hong Kong

2. Nanotechnology: •A technology •Design, production, characterization, and applications of Nanostructured materials (Size and Shape) •Also, fundamental understanding of physical properties and phenomena Nanoscience: •Study on fundamental relationships between physical properties and material dimensions on the nanometer scale 1. Nanotechnology and Nanoscience (Royal Society of London, July 2004)

3. Things Natural Things Manmade 1 cm 10 mm 10-2 m MicroElectroMechanical devices 10 -100 mm wide 10-3 m 1 millimeter (mm) Ant ~ 5 mm 0.1 mm 100 mm 10-4 m Head of a pin 1-2 mm Human hair ~ 10-50 mm wide 0.01 mm 10 mm Microworld 10-5 m Red blood cells with white cell ~ 2-5 mm 1 micrometer (mm) 10-6 m 0.1 mm 100 nm 10-7 m Nanotube transistor Nanotube electrode 0.01 mm 10 nm 10-8 m Nanoworld 1 nanometer (nm) 10-9 m ~10 nm diameter Carbon nanotube ~2 nm diameter ATP synthase Quantum corral on copper surface Corral diameter 14 nm Atoms of silicon spacing ~tenths of nm 10-10 m 0.1 nm DNA ~2-1/2 nm diameter The Scale of Things – Nanoworld and More

4. Nanostructured Materials Classification: • Nanoparticles (including quantum dots) exhibit quantum size • effects• Nanorods and nanowires• Thin films• Bulk materials made of nanoscale building blocks or consisting of nanoscale nanostructures

5. Why “nano” • Nanomaterials have superior properties than the bulk substances : • Mechanical strength • Thermal stability • Catalytic activity • Electrical conductivity • Magnetic properties • Optical properties • ……. A wide range of applications: Quantum electronics, nonlinear optics, photonics, sensing, information storage and processing, adsorbents, catalysis, solar cells, superplastic ceramics… New fields: Nanofabrication, nanodevices, nanobiology, and nanocatalysis

6. Bottom ⇨ Up: •Building what you want by assembling it from building blocks ( such as atoms and molecules). •Atom-by-atom, molecule-by-molecule, or cluster-by-cluster Two Different Approaches to Nanofabrication • Top ⇨ Down: •Start with the bulk material and “cut away material” to make the what you want

7. 2. Nanoparticle Synthesis Strategies 2.1 Liquid-phase synthesis2.2 Gas-phase synthesis2.3 Vapor-phase synthesis

8. 2.1 Liquid-Phase Synthesis • Coprecipitation• Sol-gel Processing• Microemulsions• Hydrothermal/Solvothermal Synthesis• Microwave Synthesis• Sonochemical Synthesis • Template Synthesis• Biomimetic Synthesis

9. xAy+(aq) + yBx-(aq) AxBy(s) Coprecipitation Coprecipitation reactions involve the simultaneous occurrence of nucleation, growth, coarsening, and/or agglomeration processes. Coprecipitation reactions exhibit the following characteristics: (i) The products are generally insoluble species formed under conditions of high supersaturation. (ii) Nucleation is a key step, and a large number of small particles will be formed. (iii) Secondary processes, such as Ostwald ripening and aggregation, dramatically affect the size, morphology, and properties of the products. (iv) The supersaturation conditions necessary to induce precipitation are usually the result of a chemical reaction. Typical coprecipitation synthetic methods: (i) metals formed from aqueous solutions, by reduction from nonaqueous solutions, electrochemical reduction, and decomposition of metallorganic precursors; (ii) oxides formed from aqueous and nonaqueous solutions; (iii) metal chalconides formed by reactions of molecular precursors; (iV) microwave/sonication-assisted coprecipitation.

10. Example: Precipitation of ZnS nanoparticles from a solution containing thioacetamide and zinc acetate Thioacetamide is used as a sulfide source. Zn2+ + S2- ZnS Murray C.B. et al., Annu. Rev. Mater. Sci. 2000, 30, 545.

11. Sol-gel processing The sol-gel process is a wet-chemical technique that uses either a chemical solution (sol short for solution) or colloidal particles (sol for nanoscale particle) to produce an integrated network (gel). Metal alkoxides and metal chlorides are typical precursors. They undergo hydrolysis and polycondensation reactions to form a colloid, a system composed of nanoparticles dispersed in a solvent. The sol evolves then towards the formation of an inorganic continuous network containing a liquid phase (gel). Formation of a metal oxide involves connecting the metal centers with oxo (M-O-M) or hydroxo (M-OH-M) bridges, therefore generating metal-oxo or metal-hydroxo polymers in solution. After a drying process, the liquid phase is removed from the gel. Then, a thermal treatment (calcination) may be performed in order to favor further polycondensation and enhance mechanical properties.

12. Alkoxide +H2O Stabilizer Nanodisperse Oxide Sol (Particulate or Polymeric) -H2O Gel -H2O Xerogel T > 400 ºC -H2O -Stabilizer Porous TiO2 Example: TiO2 nanoparticle-mediated mesoporous film by sol-gel processing 100 nm TiO2 nanoparticle-mediated mesoporous film (Yu, J. C. et al. Chem. Mater. 2004, 16, 1523.)

13. Microemulsion Microemulsions are clear, stable, isotropic liquid mixtures of oil, water and surfactant, frequently in combination with a cosurfactant. The aqueous phase may contain salt(s) and/or other ingredients, and the "oil" may actually be a complex mixture of different hydrocarbons and olefins. The two basic types of microemulsions are direct (oil dispersed in water, o/w) and reversed (water dispersed in oil, w/o). Nanosized CdS-sensitized TiO2 crystalline photocatalyst prepared by microemulsion. (Yu, J. C. et al. Chem. Commun. 2003, 1552.)

14. Hydrothermal/Solvothermal Synthesis In a sealed vessel (bomb, autoclave, etc.), solvents can be brought to temperatures well above their boiling points by the increase in autogenous pressures resulting from heating. Performing a chemical reaction under such conditions is referred to as solvothermal processing or, in the case of water as solvent, hydrothermal processing. TiO2 ZnIn2S4 Yu, J. C. et al. J. Solid State Chem. 2005, 178, 321; Cryst. Growth Des.2007, 7, 1444

15. Microwave-Assisted Synthesis Microwaves are a form of electromagnetic energy with frequencies in the range of 300 MHz to 300 GHz. The commonly used frequency is 2.45G Hz. Interactions between materials and microwaves are based on two specific mechanisms: dipole interactions and ionic conduction. Both mechanisms require effective coupling between components of the target material and the rapidly oscillating electrical field of the microwaves. Dipole interactions occur with polar molecules. The polar ends of a molecule tend to re-orientate themselves and oscillate in step with the oscillating electrical field of the microwaves. Heat is generated by molecular collision and friction. Generally, the more polar a molecule, the more effectively it will couple with the microwave field.

16. Conventional Heating by Conduction • conductive heat • heating by • convection currents • slow and energy • inefficient process The temperature on the outside surface is in excess of the boiling point of liquid

17. Heating by Microwave Irradiation • Solvent/reagent • absorbs MW energy • Vessel wall • transparent to MW • Direct in-core heating • Instant on-off inverted temperature gradients !

18. Microwave (MW) rapid heating has received considerable attention as a new promising method for the one-pot synthesis of metallic nanostructures in solutions. In this concept, advantageous application of this method has been demonstrated by using some typical examples for the preparation of Ag, Au, Pt, and AuPd nanostructures. Not only spherical nanoparticles, but also single crystalline polygonal plates, sheets, rods, wires, tubes, and dendrites were prepared within a few minutes under MW heating. Morphologies and sizes of nanostructures could be controlled by changing various experimental parameters, such as the concentration of metallic salt and surfactant polymer, the chain length of the surfactant polymer, the solvent, and the reaction temperature. In general, nanostructures with smaller sizes, narrower size distributions, and a higher degree of crystallization were obtained under MW heating than those in conventional oil-bath heating. Tsuji M. et al.

19. Example: Microwave-assisted synthesis of ZnO nanoparticles 1 mm 100 nm Schematic representation and transmission electron microscope (TEM) images of ZnO-cluster nanoparticles prepared by microwave irradiation Yu, J. C. et at., Adv. Mater. 2008, in press.

20. Sonochemical Synthesis Ultrasound irradiation causes acoustic cavitation -- the formation, growth and implosive collapse of the bubbles in a liquid The implosive collapse of the bubbles generates a localized hot spots of extremely high temperature (~5000K) and pressure (~20MPa). The sonochemical method is advantageous as it is nonhazardous, rapid in reaction rate, and produces very small metal particles.

21. Examples: sonochemical synthesis of mesoporous TiO2 particles Mesoporous TiO2 20 kHz sonochemical processor

22. Formation of mesoporous TiO2 by sonication TIP:Titanium isopropoxide UIA: Ultrasound Induced Agglomeration Titanium Oxide Sol Particle Hydrolysis/ Condensation UIA TIP )))) Hydrolysis/ Condensation UIA UIA Acetic acid modified TIP )))) Yu J. C. et al., Chem. Commun.2003, 2078.

23. Sono- and Photo-Chemical Deposition of Noble Metal Nanoparticles 40 kHz ultrasound Cleaning Vessel Yu J.C. et al., Adv. Funct. Mater. 2004, 14, 1178.

24. Biomimetic Synthesis Nature is a school for material science and its associated discipline such as chemistry, biology, physics or engineering. Nature fascinates scientists and engineers with numerous examples of exceptionally building materials. These materials often show complex hierarchical organization from the nanometer to the macroscopic scale. Learning from nature and imitating the growth and assembly processes found in nature enable new strategies for the design of nanoarchitectures. Biomimetic or bio-inspired processes generally occur under mild conditions such as room temperature, aqueous environment, and neutral pH, and thus are benign in comparison to traditional chemical reactions. Biologically inspired synthesis, hierarchical structuring, and stimuli-responsive materials chemistry may enable nanostructured materials systems with unprecedented functions. Many exciting bioinspired materials concepts are currently under development, such as composite materials with nacre-like flaw tolerance, gecko-inspired reversible adhesives, and advanced photonic structures that mimic butterfly wings.

25. Examples: biomimetic synthesis Model for silver crystal formation by silver-binding peptides. biosynthetic silver nanoparticles. (Stone M. O. et al. Nat. Mater.2002, 1, 169.) Protein-encapsulated CoPt nanoparticles by bio-inspired synthesis A protein of methanococcus jannaschii MjHsp (Stone M. O. et al. Adv. Funct. Mater.2005, 15, 1489.)

26. 2.2 Gas-Phase Synthesis • Supersaturation achieved by vaporizing material into a background gas, then cooling the gas • Methods using solid precursors • Inert Gas Condensation • Pulsed Laser Ablation • Spark Discharge Generation • Ion Sputtering • Methods using liquid or vapor precursors • Chemical Vapor Synthesis • Spray Pyrolysis • Laser Pyrolysis/ Photochemical Synthesis • Thermal Plasma Synthesis • Flame Synthesis • Flame Spray Pyrolysis • Low-Temperature Reactive Synthesis

27. Example: Gas Phase Chemical Preparation of TiO2TiCl4 (g) + O2 (g) = TiO2 (s) + 2Cl2 (g)Tubular reactor

28. 2.3 Vapor-Phase Synthesis • Same mechanism as liquid-phase reaction • Elevated temperatures + vacuum (low concentration of growth) • Vapor phase mixture rendered thermodynamically unstable relative to formation of desired solid material • “supersaturated vapor” • “chemical supersaturation” • particles nucleate homogeneously if • Degree of supersaturation is sufficient • Reaction/ condensation kinetics permit • Once nucleation occurs, remaining supersaturation is relieved by condensation, or reaction of vapor-phase molecules on resulting particles. This initiates particle growth phase. • Rapid quenching after nucleation prevents particle growth by removing source of supersaturation, or slowing the kinetics.

29. 2.3 Vapor-Phase Synthesis (continued) • Coagulation rate proportional to square of number concentration (weak dependence on particle size) • Nanoparticles in gas phase always agglomerate. Loosely agglomerated particles may be re-dispersed. Hard (partially sintered) agglomerates cannot be fully redispersed. • size affections • reaction and nucleation

30. 3. Challenges • Means to achieve monodispersity • Size and shape control • Reproducibility • Scale up • Building complex nanostructures