Parason

Specially cast in own foundry to provide uniform hardness throughout. The plates will wear uniformly over time and having a longer bar length. The flow of pulp follows the grooves between the bars results in longer residence time. Thus, the result of Finedge Curved bars is more gentle refining action which continues over a longer time. Curving the refiner bars causes them to function better as a pump. The half dams between sectors further improve the pulp residence time resulting in improved refining. The Parason precision Special Casting & CNC manufacturing process provides an accurate groove width, which allows the finer bar to optimize low-intensity applications. Want to buy the Parason Finedge Inlet Curved Bar Refiner Plates for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

PARASON milled blanks are cast in our foundry as a solid piece to provide uniform hardness throughout. The plates will wear uniformly over time, and with the zero draft angle on the bar, hydraulics are maintained longer.u000bu000bThe PARASON precision CNC Milling manufacturing process provides an accurate groove width, which allows the finer bar to optimize low-intensity applications. Plates life is also maximized by re-grooving which allows 2-3 life cycles. Special Features Narrow bar width Bar width range upwards. 1.6mm, 2.0mm, 2.25mm, 2.5mm High cutting edge length (CEL) Zero draft angel on the bar Long life (re-milling possible) Special metallurgy (17-4 pH) Benefits Low specific edge load (SEL) Good fibrillation gives consistent fiber treatment Constant throughput Suitable for hardwood, TMP, non-wood fibers (cotton), & recycled fibers Want to buy the Excellent Parason Finedge Milled Refiner Plates for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write to us at info@parason.com | www.parason.com

Parason Finedge Welded Refiner Plates are cast in our foundry to provide uniform hardness throughout and Welded with Special Welding Technology. The plates will wear uniformly over time, and with the zero draft angle on the bar, with high Bar height, with minimum bar width, hydraulics are maintained longer.u000bu000bThe Parason precision Special Cast, Laser & Welding, manufacturing process minimizes groove width variations, which allows the finer bar to optimize low-intensity applications. Plates life is maximized due to high bar height able to maintain in this technology. Special Features Narrow bar width Bar width range upwards. 1.2mm, 1.6mm, 2.0mm, 2.5mm, 2.8mm High cutting edge length (CEL) Zero draft angel on the bar More bar height gives more life Special metallurgy Benefits Low specific edge load (SEL) Good fibrillation gives consistent fiber treatment Constant throughput Suitable for hardwood & recycled fibers Want to buy the Parason Finedge Welded Bar Refiner Plates for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Dehydrating Screw Conveyor is used for solid-liquid separation. It consists of sedimentation hopper with perforated trough bottom section for water and fiber reclaiming and an inclined shaft screw for reject extraction. To reduce maintenance, the geared motor is directly connected to the shaft screw on the top end of the conveyor. It is designed for efficient transportation and separation of fiber & water with minimum maintenance and maximum reliability. All parts coming in contact with water are made up of SS-304. Conveyor trough provided with top bolted cover for simplified maintenance. It can be mounted horizontal or inclined. Applications & Salient Features Separation of contaminants (plastic etc.) and water from pulper reject discharge Separation of sand and water from high-density cleaner and centricleaner rejects Conveying of wood chips, straw, sawdust, fiber sludge Conveying of waste, rubbish, ashes and metal grindings Want to buy the dehydrating screw conveyor for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Hi-Consistency pulper is connected with a dilution pulper. The dilution pulper has a due function of separating the plastics and other foreign material as it dilutes at high consistency for stock transfer to further processing. This pulp has a 6-8 mm drilled screen plate with the impeller rotating against the screen. The impact of impeller separates the fiber from the rejects, hence working most efficiently for fiber recovery. u000b Applications & Salient Features Uncut contaminates from hi-consistency pulper are removed with negligible fiber loss The hi-consistency pulper is ready for the next batch immediately after emptying. The isolating valve isolates the dilution pulper from the main pulper The dilution pulper works as the first coarse screen thus reducing a load on next stage equipment Removal of large foreign contaminants eliminates the risk of pulp jamming in successive operation. u000b Want to buy the dilution pulper for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

It is an integral part of the ragger system whereby the ragger rope string is cut at regular intervals. It is used in pulp production line for cutting off the rope from ragger. It is used together with hydrapulper and wire stranding machine. The impurities in the pulp are continuously rotated to form a rope. The rope is then pulled out from the machine and is cut and carried away in an ideal length. Applications & Salient Features Used for cutting off the rope from ragger Longer moving route of cutter can avoid rope getting stuck Double hydraulic cylinders makes it has a strong cutting ability Want to buy the ragger and rope cutter in pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Ragger is used for removal of spinning contaminants such as wires, rags, strings, plastics, etc. from the pulp by using a ragger rope. Applications & Salient Features Easy installation with the horizontal and vertical type of pulper Adjustable time delay for intervals and running time of the drive motor The raggeru2019s speed can be matched to the level of contaminants of the waste paper and the production rate required Pneumatic loading and relieving of the loading rope Ragger control panel is designed to Loading and lifting of the roller in auto mode Speed control at 0-10RPM Emergency stop Visual indications of ragger motor u2018ONu2019 and air pressure u000b Want to buy the best quality ragger for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Oxidative Bleach Tower or Polcon Tower is used to hold up high consistency stock for adequate retention time which provides sufficient time for bleaching. The stock is extracted at the bottom of the tower with 4-4.5% consistency with advanced engineering of 4 dilution systems. Applications & Salient Features Possibility of reduced height in order to be installed below the operating floor Provides adequate retention time for proper homogenous reaction with chemicals Tower turbine assembly drive rotates with very minimum RPM 0.2-0.3 respective with variable frequency drive Principal Operation Tower is fed with pulp up to 24-30% from upstream disperser equipment The pulp bleaching proceeds at high consistency with adequate retention time In continuous operation the stock pumped at 4-4.5% CY to 2nd loop or next stage of process POBT provides homogenous reaction with oxidative bleach chemical for better pulp penetration to the pulp Want to buy the oxidative bleach tower for pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Gravity Thickener is compact and virtually maintenance-free. It can be adjusted according to process conditions such as throughput and inlet consistency. The pulp suspension is fed at a consistency of 0.9-2.5% to the inlet chamber in the vat towards the same direction as disc rotation. Thickening is capacity ensured by the number of discs installed in the center shaft. The thickener vat level and outlet consistency are controlled by thickener speed through VFD. The filtrate is discharged either at one or both shaft ends by gravity, depending on the thickener size. Gravity thickener permits the installation of a large dewatering area at minimum floor space.r r Applications & Salient Featuresr r Small floor space requirement due to extremely compact designr Quality of filtrate waterr Efficient & reliable dewateringr Auto door opening r Easy & simple operation and maintenance-freer Fully assembled for minimum site erectionr r Want to buy the gravity thickener for your pulp and paper machine? Call now r 91 (0) 240-2339234/35/36/37 or r Write us at info@parason.com | www.parason.com

In a deinking process ,the ink should be first detached from the fiber. Flotation technology with high efficiency provides high yield of fibers and simple handling with maximum operating reliability. A deaerator cyclone removes air from the stock and usable fiber is recovered from the foam. Salient Features Highest possible degree of brightness is achieved Improved optical cleanliness in recovered paper stock No sizing restrictions Single level control loop operation Optimized flotation yield at secondary stage without loss of brightness and cleanliness Very low fiber loss in the de-inking process as the foam is treated in a cascade process High percentage of ash in reject resulting in low fiber losses Want to buy the deinking system for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Refining is the backbone in the stock preparation stage as well as paper making. Hence each paper mill is trying to adopt the latest technology in refining. PARASON CONFINER is a modified conical refiner designed to enhance the bonding ability of fibers with a minimized freeness drop and minimum decrease if fiber length with low energy consumption and easy maintenance. Designing Factors Assurance of correct fiber retention time and development of desired fiber properties due to the short shadow cone angle and large refining surface area. Easiest filling change due to cantilever design Loading/Unloading with hydraulic power pack system for fully auto control provide stable loading Want to buy the conical refiner for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Due to smaller diameter of rotor, this equipment is more power efficient as compared to the others. The deflaking action takes place in 3 steps u2013 There is lesser damage to the fibers (i.e. less shortening and more fibrillation). The 3 step design ensures more retention time to the fiber while deflaking (as compared to teeth or hole type). There is consistent deflaking due to online gap adjustment with respect to the current drawn. The life of the fillings is longer. Applications and Features More output due to more area of deflaking Power consumption is less as compared to other types ofu00a0Deflekers No load power is also less as compared to other types ofu00a0Deflaker Get the better quality of pulp For breaking flakes in the pulp Want to buy the conical deflaker for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

The main function of the Trommel Screen is to lessen the contaminant load on Fiber Saver (PFS). The light rejects normally directed to Trommel Screen. It is built with special heavy duty perforated drum with hole size ascending order and aided by the suitable shower inside & outside allowing the recovery of fibers. The coarse contaminants are getting rejected and accepted material is returned to the Pulper. Advantages Easy Installation Perforated drum of SS-304, drive arrangement, inside helical screw, outlet chute of SS-304 and supporting structure of M.S. Drum is driven through Geared Motor, Pulleys and Belts C-I drive and driven pulleys properly machined Shower pipe with nozzles of SS-304 Want to buy the trommel screen for pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Gentle Fiber Treatment Geometry of the Parason confiner is quite different from the conventional double disc refiner. The fiber development (treatment) depends on u2013 Amount of fibers between refiner bars Stability of the gap clearance Greater the amount of fibers on bar, gentle will be the fiber treatment Higher amount of fibers on the bar results in better stability of gap clearance, better fiber development, and lower energy consumption Designing Factors Assurance of correct fiber retention time and development of desired fiber properties due to short shadow cone angle and large refining surface area Easiest filling change due to cantilever design Loading/unloading with hydraulic power pack system for fully auto control provide stable loading Stable operations and accurate gap control provides stable loading Fast and slow modes of loading/unloading operations Compact construction reduces floor space requirements Exceptionally low/no-load power consumption rises the effective power Want to buy the confiner tackle for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Air (at the atmosphere pressure) and pulp stock to be deinked is introduced into the cell chamber through a specially designed injector nozzle. Flow-through nozzles generate a negative pressure that sucks in the necessary process and generates microturbulence resulting in widely ranging bubble sizes enabling efficient removal of an equally wide range of particle size. This enhances brightness to a high degree and reduces dirt, specks, and stickies efficiently. The injectors optimize the quantity of the air injected and the size of the bubbles generated. The pulp stock free from ink is pumped from the bottom of one cell to the next cell. The ink laden foam overflows to the foam chamber with the help of a motorized paddle. Salient Features Purpose u2013 To remove the printing ink, stickies Process u2013 Ink is detached from fibers Flotation Technology u2013 High efficiency, high yield of fibers, simple handling, max. operating reliability Want to buy the bright solutions for your pulp industry? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

The pulp stock introduced centrally into the deflaker, pass through the gap between the rotor and stator and teeth of each ring towards the outlet. Unique tri-disc system, the rotating disc at high speed creates strong turbulence and hydro-dynamic stock waves and the fiber bundles and flakes while passing through the gap between teeth of rotor and stator of release the bonds between individual fiber under the impact of high-frequency waves and frictions. Depending on the furnish and required differing efficiency the outer most ring size is selected and the gap between rotor and stator is adjusted by the shims. Applications and Features The fillings design is very precise with simplicity in manufacturing The fillings are manufactured with all over the machined surface which gives better deflaking effect on the fiber The gap between stator and rotor discs is constant. Hence, avoiding the clashing of stator and rotor discs in spite of the fluctuations in the flow and pressure of the pulp Want to buy the ring type deflaker for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Parason Tri-Disc Deflaker is a high-speed deflaker, primarily used for deflaking market pulp and various kinds of brokes to obtain high-quality products with better strength properties. The fiber bundles and flakes are completely deflaked into individual fibers by hydro-dynamic shock waves created with high-quality deflaker discs, which rotate at a high speed of 1500 to 3000 RPM. The freeness of the stock is slightly increased, but deflaking contributes to the uniformity of sheets and substantially improves its strength & formation. Want to buy the hole type deflaker for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

The Trapmagni is sturdy and made up of fabricated stainless steel construction. It has a large permanent magnet for more contact areas hence improved removal efficiency. Its well-shaped body assets other non-magnetic tramps for gravity. Periodic cleaning marks easy through the cleaning door and tramp drain. Provision of tray over the concealed magnet for fast cleaning. Auto arrangements gives excellent results. Sizes Trapmagni 6 u2013 50 TPD Trapmagni 8 u2013 80 TPD Trapmagni 12 u2013 140 TPD Main Features Main body is SS-304 No moving parts No flush water No energy consumption Maintenance free Easy installation Up to 6 bar operating pressure 1 year guarantee Want to buy the trapmagni for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Parason Medium Consistency Centricleaner operates at consistency range of 1.5-2% against normal cleaner range of 0.6%-1%. Applications & Salient Features- In Pulp Mill For all type of Recycled Paper and Virgin Pulp Before Slotted Pressure screen u2013 Increase life of Screen Baskets Before Deinking Cell u2013 Improve Deinking efficiency and Diffuser life Before Disperser/Kneader u2013 Longer life of wear parts like screw, basket, disperser plates In Approach Flow(Paper Machine) For All grade of Paper production Double dilution system u2013 Reduce Power and space requirement Closed system u2013 Avoid Air entrapment in pulp stock Less number of bottles, pump, and No Level Control required u2013 Reduceu00a0Paper Machineu00a0start uptime Want to buy the medium consistency centricleaner for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

The low consistency pulper comes with a u2018Du2019 shaped section of the tub that increases the turbulence in the tub causing the blades/bundles to submerge rapidly thus reducing the dwelling time. It is suitable for continuous operations, for furnish of OCC, AOCC, Box Board, separating the reject and fiber. The Fiber discharge line is connected to the pulp suction or directly fed to storage towers. u2018Du2019 Pulper can be operated in ambient temp as well as elevated temp. up to 700u00b0C Heavy-duty sturdy bearings take impact load of bales/waste paper bundles Removes plastic in large pieces with little degradation Reduce the burden on downstream equipment Decreases/eliminates cleanout downtime Want to buy the low consistency pulper for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com

Pulp stock is fed through inlet pipe header to the cleaners. It enters the tangential inlet and accelerates the stock to downward centrifugal motion. The cleaned pulp stock rises upwards and goes via accept header to the upstream system. Applications & Salient Features The main function is to remove light weight contaminants like dirt, shives, specks, pins, clips, etc. High wear resistance construction, bottom ceramic cone Improved optical cleanliness of paper due to removal of specks and shives The small cone diameter resulting in outstanding cleaning efficiency Proven design for approach flow location Want to buy the low consistency cleaner for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

The tangential inlet accelerates the stock to downward centrifugal motion. Due to centrifugal rotation of the rotor, the Impurities with high specific gravity are forced to the outer wall of the cone and downward to collect in a trap. The cleaned stock is discharged from the cleaner through a central discharge pipe from the bottom side. Applications & Salient Features Efficient removal of impurities like sand, glass, clips, pins, etc Easy visual inspection of the vortex through the illuminated sight glass. Simple installation Protection of further screening and refining equipment from wear and abrasion Want to buy the hi-density cleaner for your pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Grapple is an equipment of the pulping system of paper machinery. The grab body is composed of four lobes, cylinder, connecting rod, lifting ring seat, pin shaft, cylinder fixed shell, hinge, etc. Accessories Pneumatic three joint, two bit four way solenoid directional valve, gas source, etc. Applications & Salient Features Mainly used for grappling heavy and large impurities from sediment well Four u201cpetalu201d is air pressure type operation Easy to maintain and operate Adopts stainless steel material Has a long service life Want to buy the grapple for pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com

Parason Folded Thickner in comparison to normal thickeners provides a considerable larger filtration area. This can translate into smaller space requirements or a higher capacity for specific floor space. The wire clothing is divided into sectors so that each section can be replaced without removing the drum/cylinder. The stock suspension fed into the cylinder through an inlet which evenly distributes the stock across the width of the thickener. The water passes through the wire mesh and the fiber mat is formed on the surface of the cylinder. Between the stock level in the vat and the surface of the drain water inside the cylinder, a hydrostatic pressure difference (Ah) is produced, which provides continuous filtration. The surface of the wire cloth is cleaned by the shower. Used as a Thickener for u2013 Recycling fiber, chemical, & mechanical pulp Effluent sludge, broke chemical industry Used as a Washer for u2013 Deinked pulp Removal of fillers & fines from recycled fiber pulp Want to buy the folded thickener for pulp and paper machine? Call now 91 (0) 240-2339234/35/36/37 or Write us at info@parason.com | www.parason.com