1 / 8

Thermoplastic Products for Water Treatment Systems

Thermoplastic Products for Water Treatment Systems. Asahi/America, Inc. For more Information: Please click here and complete the contact form. Fill Station. Typical System Set up. Off Loading. Outdoor Storage. Acid Dispense Building. Underground Transport. High Pressure Diaphragm Pumps.

Pat_Xavi
Télécharger la présentation

Thermoplastic Products for Water Treatment Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermoplastic Products for Water Treatment Systems Asahi/America, Inc. For more Information: Please click here and complete the contact form

  2. Fill Station Typical System Set up Off Loading Outdoor Storage Acid Dispense Building Underground Transport High Pressure Diaphragm Pumps Injection Well Water Feed Line to RO Plant RO Pretreatment For more Information: Please click here and complete the contact form

  3. Application Details • Fill Station • Feed Line from Trucks to On-Site Storage Tank • Filled 2 to 3 times per week • Temp = 75 to 85 F • Pressure = 20 Psi or Less • Underground Transport to Acid Building • Continuous Feed: 1600 Gallons/day = 67 gallons/hour = 1.1 gallons/minute • All Pipe Dual Contained • Line Size: 2” – 4” Depending on facility • Temp = 75 to 85 F • Pressure = Gravity Feed to 30 psi • Acid Building • Increase pressure to 50 to 110 psi • Line Size = ½” – 2” • Temperature = 85 F • Dual Contained leaving Acid Building up to Injection Well • Injection Well • Pressure = 50 to 110 psi • Water line is at 50 to 75 psi • Temperature is normally 85 F • Temperature will spike to 180 F when acid injection stops. Water will fill Acid line and create Exothermic reaction • Acid • 93 – 98.9% H2S04 with SO3 • Temp: See Above • Pressure: See Above RO Pretreatment For more Information: Please click here and complete the contact form

  4. Product Recommendations • Fill Station: Single wall Purad PVDF or Ultra-Pro E-CTFE • Underground Transport: PVDF x PVDF or E-CTFE x PP Duo-Pro • Acid Building: single wall Purad PVDF or Ultra-Pro E-CTFE • Injection Well: single wall and Injection Quill RO Pretreatment

  5. Common Chemicals and Recommendations Water Treatment Systems For more Information: Please click here and complete the contact form

  6. Common Water Treatment Applications All dependent on concentration and temp. Consult A/A for exact recommendation on application Chemical Treatment For more Information: Please click here and complete the Contact form

  7. Vortex Flowmeter Recommendations All dependent on concentration and temp. Consult A/A for exact recommendation on application Consult A/A on Flow range selection Chemical Treatment For more Information: Please click here and complete the Contact form

  8. For more Information: Please click here & complete the contact form Thank you Asahi/America, Inc. www.asahi-america.com

More Related