Download
see 3433 elements of armature winding in dc machines n.
Skip this Video
Loading SlideShow in 5 Seconds..
SEE 3433 Elements of Armature Winding in DC Machines PowerPoint Presentation
Download Presentation
SEE 3433 Elements of Armature Winding in DC Machines

SEE 3433 Elements of Armature Winding in DC Machines

362 Vues Download Presentation
Télécharger la présentation

SEE 3433 Elements of Armature Winding in DC Machines

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. SEE 3433Elements of Armature Winding in DC Machines

  2. Elements of an armature windings A turn – two conductors connected to an end by an end connector

  3. Elements of an armature windings A coil – several turns connected in series

  4. Elements of an armature windings A winding – several coils connected in series

  5. 180o electrical = 90o mech 360o electrical = 180o mech Elements of an armature windings The angle between centers of adjacent poles is 180o (electrical) N S S N

  6. a a b b Elements of an armature windings The angle between centers of adjacent poles is 180o (electrical) If coil sides are placed 180o electrical apart, the coil is said to be full-pitch N 180oelec S S N

  7. Elements of an armature windings The most common ways of connecting coils for armature windings: Lap winding Wave winding Ends of the coils are connected to the commutator bars In DC machines most of the coils are full-pitch.

  8. Commutator bar Elements of an armature windings Lap winding • One coil between adjacent commutator bars • 1/p of total coils are connected in series • No. of poles  no. of brushes  no. of parallel paths

  9. Elements of an armature windings

  10. Elements of an armature windings Wave winding • p/2 coils in series between adjacent commutator bars • ½ of all coils between brushes • Regardless of no. of poles, there are always 2 parallel path • The distance between end coils (commutator pitch) is 2(C1)/p where C is the no. of commutator bars

  11. Elements of an armature windings