How To Extend Your Wi-Fi By Using A Router As A Repeater

1. How To Extend Your Wi-Fi By Using A Router As A Repeater? Got a spare wifi router? Don’t know what to do? Well, you have clicked on the right URL which brought you to us. Save your money from purchasing a new wifi repeater and configure your spare router as a repeater. In this blog, we will tell how you can configure your repeater router and do the router repeater setup. Hook your eyes and go along the blog to know the steps to setting up your wifi router as a repeater. Stepwise Instructions To Set Your Router As Repeater:- Below are the steps to set up your wifi router as a repeater but you need to keep a few points into consideration such as; •It is not really the best way to extend your wifi router signals. •Many wifi routers do not allow or support wireless bridging. •You need a very long ethernet cable unless there are numerous ethernet ports. Taking the above points into view, move ahead with the procedure of router repeater setup; •The first step involves all the relevant information about your wifi router that you are recently using. Check the IP address, security type, wifi channel that it is broadcasting, etc and keep a note of them. •The second step involves connecting to the wifi router. After that, search the default IP address in your default web browser and on the login page enter the login information to log into the router’s configuration settings panel. •In the next step look for the wifi settings of the router. Without making any modifications just check the wifi name, channel, and security type.

2. •The next step involves resetting the wifi router to its factory settings. For that, plug the router and look for a small hole named as reset, press it and reset the device to its default factory settings. •Now, start configuring your second wifi router by connecting it to a computer or laptop using a network cable. •The next step needs you to co[y over the settings by ignoring the setup wizard. Navigate to the wifi settings web page and enable the wireless button. Modify the name of the network and choose the wifi channel same as the main router. Also, change the password and keep it the same as the main wifi router. Make sure the security type is also similar to the primary wifi router. •Assign a fixed IP address to the spare router in the same range as the first wifi router. It is advised to switch off the NAT function to prevent double NAT. You can put the second router in the bridge mode to do it accurately. •After that, connect everything together. Enable WDS on both the outer if they support it. •You can connect both the routers wirelessly also without the need of network cables, power lines adaptors or anything else. •The final step is to use custom firmware and then it is quite easy to turn on the repeater settings. Thank Us Later For Saving Your Money! We did save you some bucks, right? So that was how you configure your repeater router. Be very careful in attempting these steps as they can be quite tricky at times. The above-mentioned steps for router repeater setup do require some technical knowledge but you can always get in touch with our technical aces and take their help on this matter.