1 / 12

JOINT Pulsed MIG Welder for Liquefied Gas Cylinder

Manufacturer: Shanxi Nebula Automatic Equipment Co., Ltd<br>Official Exporter: Beijing Kunzhuo Electric Co., Ltd.<br>URL:www.digitalwelding.com.cn <br>Email: info@kunzhuo.com.cn

YiruChen
Télécharger la présentation

JOINT Pulsed MIG Welder for Liquefied Gas Cylinder

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Liquefied-gas Cylinder Application Analysis Manufacturer: Shanxi Nebula Automatic Equipment Co., Ltd Official Exporter: Beijing Kunzhuo Electric Co., Ltd. URL:www.digitalwelding.com.cn Email: info@kunzhuo.com.cn

  2. JOINT Pulse MIG--Suprior Welding Quality Make Every Weld Easy

  3. Company Introduction Deliver Quality With Every Weld

  4. Overview Case Background Our Solution Outcome

  5. Liquefied-gas Cylinder Background Info Manufacturer: Factory A nProduction Capacity: 450 pcs of Liquefied-gas cylinder per day; nBase Material: Carbon steel Q235; nStandard Dimension: 320x3mm; nExpected Lead-time: 65s-70s/cylinder; nAcceptance standard: Grade I & II by X-ray detection; nWelding width: 14mm; nWelding height: 1mm; nNot permitted: lack of penetration, lack of fusion, over-burn defects, spatter and clean-up.

  6. Situation June 2015 Factory A is facing the following issues when using its Submerged Arc Welding Machines: 1. Pass rate: 40%-50% 2. Production lead-time: 100s-120s/cylinder 3. Welding current: >400A 4. High power consumption. Low Pass Rate Low Productivity High Energy Consumption

  7. Our Solution July 2015 Factory A purchased 10 JOINT PULSED MIG Welders. 1. Welding current is 300A-330A 2. Lead-time: 65s- 70s per round. 3. Pre-gas time: 10s Post-gas time: 3s. Low Heat Input Constant Output Eliminate Burnthrough Spatter-free Welding Short & Concentrated Arc

  8. Performance Comparison Performance with Joint Pulse MIG Performance with Other Chinese Brand Pulse MIG

  9. Outcome Power Consumption Performance Productivity

  10. PERFORMANCE! X-Ray Detection Result Factory A did flaw detection for the 100 cylinders by X-ray. The results are: ØGrade I: 90pcs ØGrade II: 7pcs ØGrade III: 3pcs Remark: Grade I and Grade II are accepted. Failure rate:3%

  11. Superior Welding Quality Welding Quality Gas Leakage & Accidents Safety for Households Usage: Cooking in the kitchen

More Related