1 / 2

Step for resetting and long beep: Connect the PCB with machine.

Resetting and long beep test for PCB without digital display. Step for resetting and long beep: Connect the PCB with machine. Switch on the machine from power supply board. Do not switch on the power button of PCB. Ensure there should not be water and cloth load in machine.

abrial
Télécharger la présentation

Step for resetting and long beep: Connect the PCB with machine.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Resetting and long beep test for PCB without digital display • Step for resetting and long beep: • Connect the PCB with machine. • Switch on the machine from power supply board. • Do not switch on the power button of PCB. • Ensure there should not be water and cloth load in machine. • Press program (SW3) and process (SW4) button simultaneously and wait. • 3 program LED will simultaneously blink along with 6 small beep sound. • At the end one long beep sound will come and machine gets off. • Press the power button and then press start button and keep it pressed. After 6 rotation of pulsator fuzzy light should glow. Applicable Models Digi Pacific, Digi Atlantic, Digi Rainbow, Digi Wave, Digi Aqua, KF-6011, KF-6511 Process and program button to be pressed simultaneously

  2. Resetting and long beep test for DIGI SPRING PCB with digital display • Step for resetting and long beep: • Connect the PCB with machine. • Switch on the machine from power supply board. • Ensure that there should not be water or clothe load in machine. It should be empty. • Press power and water level (WL) button simultaneously and wait. • Machine will be silent for 6 sec and display will show dr. • At the end long beep sound will come and machine gets off. • Press the power button and then press start button and keep it pressed. After 6 rotation of pulsator fuzzy light should glow. Applicable Models Digi Spring Power and water level button to be press simultaneously

More Related