1 / 14

Design of twinblock by clark

Design of twinblock by clark. 6 type of design. Type 1. Standard Twin Blocks-Class II Div I (with good arch form) • Adams or Delta Clasps, and Anterior Ball clasps for good retention •Twin Blocks, at a 70º angle, to advance mandible

ace
Télécharger la présentation

Design of twinblock by clark

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design of twinblock by clark 6 type of design

  2. Type 1

  3. Standard Twin Blocks-Class II Div I • (with good arch form) • Adams or Delta Clasps, and Anterior Ball clasps for good retention •Twin Blocks, at a 70º angle, to advance mandible • Upper Midline Screw: so upper arch can accommodate lower arch in advanced position

  4. Type 2

  5. Standard Twin Blocks-Class II Div I • (with crowded lower arch) • Adams or Delta Clasps, and Anterior Ball clasps for good retention •Twin Blocks, at a 70º angle, to advance mandible • Upper and lower Midline Screws

  6. Type 3

  7. Stage II - Support Phase • Anterior Inclined Plane used to maintain the corrected • AP and incisor relationship until buccal segments settle into full occlustion. • *Molars must be in contact to begin Stage II

  8. Type 4

  9. Class II Div II Twin Block • Adams or Delta Clasps •Twin Blocks, at a 70º angle, to advance mandible • Upper and lower Midline Screws • Lingual Springs to move anterior forward • To Open Bite: Reduce upper bite block as • ilustrated above

  10. Type 5

  11. Class II Div II Twin Block “SAGGITAL” • Adams or Delta Clasps, and Ball clasps • Standard 70º Twin Blocks • Adjust screws ¼ turn per week to advance anteriors • To Open Bite: Reduce upper bite block as • ilustrated above

  12. Type 6

  13. Twin Block to Close the Bite • Adams or Delta Clasps • Standard 70º Twin Blocks • Tongue guard to prevent tongue thrust and act as Inclined plane to support the corrected incisor relationship • Lower Acryclic extended to 6’s with indicated clasps • Acrylic relieved lingual to anteriors to encourage reduction of open bite

  14. refrences • Principles of Appliance Therapy Operatory Edition. • Clark, William. “Twin Block.” The American Journal of Orthodontics. January 1988.

More Related