1 / 8

Stereolithography

Stereolithography. Richard Morton. How it works. On each layer, the laser beam traces a part cross-section pattern on the surface of the liquid resin. . Stereolithography is an additive fabrication process utilizing a vat of liquid UV- Curable Photopolymer “resin“

ada
Télécharger la présentation

Stereolithography

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Stereolithography Richard Morton

  2. How it works On each layer, the laser beam traces a part cross-section pattern on the surface of the liquid resin. Stereolithography is an additive fabrication process utilizing a vat of liquid UV- Curable Photopolymer “resin“ and a UV laser to build parts a layer at a time. After a pattern has been traced, the SLA's elevator platform descends by a single layer thickness. Then, a resin-filled blade sweeps across the part cross section, re-coating it with fresh material. A complete 3-D part is formed by this process.

  3. How it works • Stereolithography is an additive fabrication process • utilizing a vat of liquid UV- Curable Photopolymer “resin“ and a UV laser to build parts a layer at a time. • On each layer, the laser beam traces a part cross-section pattern on the surface of the liquid resin. • After a pattern has been traced, the SLA's elevator platform descends by a single layer thickness. • Then, a resin-filled blade sweeps across the part cross section, re-coating it with fresh material. • A complete 3-D part is formed by this process.

  4. Materials SLA machines are able to use photopolymers, which are plastics that react to lasers. Costs The photo-curable resin can cost any where from $300 to $800 per gallon. An SLA machine can cost from $100,000 to $400,000.

  5. Pros/Cons • There is no limitations to the shapes of the parts. • A functional part might take 6 to 12 hours. Most SLA machines can produce parts with a maximum size of 20” x 20” x 24”.

  6. File Types Most machines accept either .stl or .iges files.

  7. Origination The term “stereolithography” was coined in 1986 by Charles Hull.

  8. Works Cited http://en.wikipedia.org/wiki/Stereolithography http://computer.howstuffworks.com/stereolith5.htm http://www.rapidsolutions.com/stereolithography.htm

More Related