1 / 5

Job Performance Requirement 10-25

Job Performance Requirement 10-25. Modified Gasner Bar Pack. A Start at the male end of the hose (100 feet [30m]) and form a roll 30 inches (.8m) in diameter on flat ground. JPR 10-25A. B Continue to roll the hose in the direction of the rows and make the rolls as tight as possible.

adara
Télécharger la présentation

Job Performance Requirement 10-25

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Job PerformanceRequirement 10-25 Modified Gasner Bar Pack

  2. A Start at the male end of the hose (100 feet [30m]) and form a roll 30 inches (.8m) in diameter on flat ground. JPR 10-25A

  3. B Continue to roll the hose in the direction of the rows and make the rolls as tight as possible. JPR 10-25B

  4. C The completed field roll, with the female coupling on the outside, is ready for packing. Grab the outside of the hose roll near the female coupling and pull toward the center of the roll. JPR 10-25C

  5. D The fold should now protect the female end. The top layer of hose can now be tied to the bottom layer using a piece of rope 32 inches long (0.9 m). Two rolls of hose may be placed together and tied off with rope on the outside of the rolls with a shoulder strap to allow carrying. JPR 10-25D

More Related