1 / 12

Maria Pacana

Using an Electromagnetic and Acoustic Sensing Device to Determine Direction and Range Part of the Intelligent Ground Vehicle Project. Maria Pacana. Objective.

adria-brown
Télécharger la présentation

Maria Pacana

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Using an Electromagnetic and Acoustic Sensing Device to Determine Direction and Range Part of the Intelligent Ground Vehicle Project Maria Pacana

  2. Objective • The implementation of an electromagnetic and acoustic sensing device that determines range and direction to enable one autonomous vehicle to follow another.

  3. Sensing array: • PIC-C microcontroller • Radio transmitter • Radio receiver • Sonar transmitters and receivers

  4. Sonar and Radio Transmitters • Sonar and radio transmitted together • Controlled by an LMC 555 CMOS Timer at 1.66 Hz • Rolling code radio transmitter, hard to electronically ‘crack’.

  5. The Radio And Sonar Receivers The Radio and Sonar Recievers • The sonar receiver must transmit in order to receive • When the radio receiver gets a signal, it initializes the sonar and enables it to receive. • The sonar receiver must transmit in order to receive. • When the radio receiver gets a signal, it initializes the sonar and enables it to receive.

  6. Diagram of Sensing Array SPEED OF LIGHT RADIO XMIT RADIO RCVR PIC -C MCU TIMER SPEED OF SOUND ACOUSTIC XMIT BINAURAL SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  7. How It Works: • The radio receiver gets the electromagnetic part of the signal at the speed of light. • The sonar receiver gets the acoustic part of the signal at the speed of sound. • The difference between the electromagnetic and acoustic signals indicates range. • The difference between each ‘ear’ of the binaural receivers indicates direction.

  8. T = 0 Diagram of the Signals RADIO RCVR LEFT ‘EAR’ RIGHT ‘EAR’ TIME tElapsed = 20 ms

  9. Navigation • To test this system, the receivers were mounted on an autonomous mobile robot and connected to a PIC-C microcontroller. • The robot takes the difference in readings between each ear of the binaural sonar receivers in order to correct itself. • The greater the difference, the more the robot ‘corrects.’

  10. N START 300 < L < 700 300 < R < 700 N RADIO ? ROBOT CORRECTS L = R Y INIT COUNT GO FORWARD DELAY .5 ms N 0 < L < 300 0 < R < 300 SET MAX = 1000 STOP ROBOT TURNS Y 700 <L < MAX 700<R< MAX N GO FORWARD

  11. Advantages and Disadvantages • Is not affected by sunlight • Has more range, less resolution than IR • The 400 V excitation pulse that switches the sonar on and off can cause electrical noise in other circuits • ‘Echoes’ from the receiver

  12. Thanks to: • Professor Roman Kuc • Ed Jackson • The Intelligent Ground Vehicle Team

More Related