1 / 16

EUROPUMP LOT11 - Consultation Forum Contribution

EUROPUMP LOT11 - Consultation Forum Contribution. Minimum EEI values. Circulators. Example: h tot. = 0.92 · 0.96 · 0.730 = 0.645 EEI  0,3 for big circulators. h tot. = h Motor · h elec. · h hydr. Circulators. A-G Class labelling  mandatory (2010)

alton
Télécharger la présentation

EUROPUMP LOT11 - Consultation Forum Contribution

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EUROPUMPLOT11 - Consultation ForumContribution

  2. Minimum EEI values Circulators Example:htot. = 0.92 · 0.96 · 0.730 = 0.645EEI  0,3 for big circulators h tot. = hMotor·h elec.·hhydr.

  3. Circulators • A-G Class labelling  mandatory (2010) • Introduction of new voluntary labelling class A* (EEI < 0.3) • Make A the minimum efficiency performance (MEP) in 2015 (150Mio €)

  4. Technical feasibility of A* and A** 64,5%

  5. BAT-Circulators with PM-motor in market today A A* A** ~25 ~250 Technical feasibility of A* and A** Technical borders for different circulator sizes based on catalog data and BAT efficiency curve assumption Best possible Label class PHyd > 250 W Best possible Label class 25 W < PHyd < 250 W Best possible Label class PHyd < 25 W

  6. Water Pumps - House of Efficiency Head BEP HBEP h Pump Efficiency Curve hBEP hPL,OL Flow 0 QBEP QPL QOL

  7. Water Pumps • Focus changed from Application to pump type • Methodology (TU Darmstadt) with part- and overload evaluation (House of Efficiency) • CE-Assessment Standard to be developed • ‘Best in Class’ Labelling leads to wrong pump selection (Problem: Duty Point – BEP) • Effort compared to savings too high for proposed cut-off • Costs appr. 226 Mio € for CutOff 30%

  8. Water Pumps – BiC Labelling Final AEA-Report 2008

  9. What is Cut Off ?

  10. What is Cut-Off [%] ? Cut-Off 5%

  11. What is Cut-Off [%] ? Cut-Off 20%

  12. What is Cut-Off [%] ? Cut-Off 40%

  13. What is Cut-Off [%] ? Cut-Off 60%

  14. What is Cut-Off [%] ? Cut-Off 80%

  15. Additional Development Costs • DC = f1· f2 · f3 · Zcut · fd · 200 000 € • f1 = not included manufacturers in data collection • f2 = not included models • f3 = modular complexity reduction • Zcut = pumps to be improved in market • fd = density harmonisation, etc. / additional product range

  16. Costs

More Related