1 / 12

Conversion Factors for Oilfield Units

Conversion Factors for Oilfield Units. Need for Unit Conversions. Petroleum Engineers must be able to work with various unit systems International scope of industry Unit systems used varies geographically Team members may not all be located in same geographical location

alvis
Télécharger la présentation

Conversion Factors for Oilfield Units

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Conversion Factors for Oilfield Units

  2. Need for Unit Conversions • Petroleum Engineers must be able to work with various unit systems • International scope of industry • Unit systems used varies geographically • Team members may not all be located in same geographical location • Joint ventures between companies • Particular units may be required at your location • Legislated units for reporting and regulatory compliance • Company protocol

  3. Oilfield Units • Oilfield units are non-coherent • Newton’s 2nd Law (F=ma) • SI: Force (Newton) is a derived unit to make equation coherent • USCS: Mass (slugs) is a derived unit to make equation coherent • AES, Oilfield Units: A unit conversion constant required (F=ma/gc ) • Darcy’s Law • Darcy units: Permeability is a derived unit to make equation coherent • SI: coherent (permeability unit is m2 ) • Oilfield Units: A unit conversion constant is required • The constant may include geometry terms (integrated form) • For gas flow, the constant may include standard temperature and pressure, even for Darcy and SI units

  4. Learning Objectives • Deriving unit conversion constants • Given • A physical relationship expressed as an equation, using coherent units or with a correct conversion constant supplied • and appropriate unit conversion factors between unit systems • Find • The required unit conversion constant (including its units) to express the equation in a different unit system • Correctly apply Darcy Equations for incompressible fluid and real gas, using oilfield units • See handout, “Darcy Equations” • Note definitions of standard temperature and pressure for the Real Gas cases

  5. Darcy’s Law - Darcy Units • Linear (1-D) flow of an incompressible fluid • where, • q cm3/s • k Darcy • A cm2 • p atm •  cp • L cm • The Darcy a derived unit of permeability, defined to make this equation coherent (in Darcy units)

  6. Darcy’s Law - Oilfield Units • Linear (1-D) flow of an incompressible fluid • where, • q bbl/D • k millidarcy • A ft2 • p psia •  cp • L ft • The approach demonstrated will be to convert each term back to Darcy units, restoring the coherent equation, then collecting the conversion factors to obtain the oilfield unit constant, C

  7. Darcy’s Law - Oilfield Units q [cm3/s] = q [bbl/D] · 5.61458 [ft3/bbl]· (30.48)3 [cm3/ft3]· (1/86400) [D/s] = 1.84013[(cm3/s)/(bbl/D)]· q [bbl/D] k [d] = k [md]· (1/1000) [d/md] A [cm2] = A [ft2]· (30.48)2 [cm2/ft2] p [atm] = p [psia] · (1/14.6959) [atm/psia] L [cm] = L [ft]· 30.48 [cm/ft]

  8. Darcy’s Law - Oilfield Units • Collecting the constants and canceling • The unit of the constant is defined from the above equation • We were able to cancel leaving the units of C as shown above because,

  9. Static Pressure Gradient - SI Units • Static pressure gradient of a fluid • where, • p Pa = N/m2 = (kgm/s2)/(m2) = kg/(ms2) •  kg/m3 • g 9.80665 m/s2 • h m • Coherent for SI units

  10. Static Pressure Gradient - Oilfield Units • Static pressure gradient of a fluid • where, • p psi = lbf/in2 •  lbm/ft3 • g 32.174 ft/s2 • h ft

  11. Static Pressure Gradient - Oilfield Units p [Pa] = p [psi] · 6894.757[Pa/psi]  [kg/m3] =  [lbm/ft3] · 16.01846 [kg/m3)/(lbm/ft3)] h [m] = h [ft] · 0.3048 [m/ft] • Because the constant D is on the bottom, collect terms on left and cancel using definition of Pascal [Pa] D=4633.06 [(lbm /ft3)(ft/s2)(ft)/(psia)] • Alternate derivation from dimensional homogeneity (self study) D=(144 [in2/ft2]) · (32.174[(lbm·ft)/(lbf·s2)]) • OR D=4633.06 [(in2/ft2)·(lbm·ft)/(lbf·s2)])

  12. Darcy Equations for Real Gas • For pseudopressure, m(p), the unit conversion constant, C, is the same as for p2 equation (Constant (z mg)) • A single term of the equation is replaced with the term in brackets having the same units and meaning: • Note that in oilfield units, m(p) has units of [psia2/cp] • Note the constant, C, includes the 1/2 from integration

More Related