1 / 14

Thermodynamic Work consumed during Manufacturing Processes

Thermodynamic Work consumed during Manufacturing Processes. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi. Estimation of manufacturing works!!!. Innovative Design to modify Pressure volume Diagram. Thermodynamic definition of Plastic Deformation Work.

amello
Télécharger la présentation

Thermodynamic Work consumed during Manufacturing Processes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermodynamic Work consumed during Manufacturing Processes P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Estimation of manufacturing works!!!

  2. Innovative Design to modify Pressure volume Diagram

  3. Thermodynamic definition of Plastic Deformation Work Themodynamically simple displacement work : • A bar of initial length l0 is subjected to a force F acting upon an area A0 and an extrusion dl occurs, the work consumed is: Work consumed by unit volume of extruded material is:

  4. Most Generic Extrusion Work • Stress and strain are tensors. • The generalized work consumed can be represented as:

  5. Effective strain & Stress • Effective stress and strain are defined for each extrusion case as: • Von Mises proposed an expression for effective stress as: • iare called as principle stresses and obtained as roots of a cubic equation :

  6. The simplified form of specific work equation is

  7. Specific work done during Extrusion of Axi-symmetric incompressible solids

  8. Common Models for Extrude Materials • Ductile aluminum alloys are most preffered material for extrusion. • For infinitesimally slow extrusion.

  9. Impact of Thermodynamic Analysis of Extrusion

  10. Displacement work during Metal Cutting Themodynamically simple displacement work : The total cutting work consumed in machining can be defined as the sum of shear work and friction work. Also defined as primary shear work and secondary shear work.

  11. Simple model for Primary Shear Work Primary shear work is estimated as: The layer to be removed of thickness t1transforms into the chip of thickness t2as a result of shear deformation that takes place along a certain unique plane AO. This plane is inclined to the cutting plane at an angle ϕ. This is called as single shear plane model. This plane moves with at velocity Vsparallel to Fs relative to Tool

  12. Comprehensive model for Primary Shear Work • Plastic zone LOM is limited by shear line OL, along which the first plastic deformation in shear occurs. • Shear line OM along which the last shear deformation occurs.

  13. Line LM is “the surface of the cut” . • The plastic zone LOM includes “a family of shear lines along which growing shear deformation are formed successively.” • This shape of the deformation (plastic) zone is based on the multiple experimental studies and this is more than a very serious statement. • Based on this model the specific work consumption is:

  14. Effective Plastic Zone Stress during Metal cutting

More Related