1 / 10

CONSIDERATIONS FOR FUTURE SEISMIC SYSTEMS

CONSIDERATIONS FOR FUTURE SEISMIC SYSTEMS. Bob Nigbor USC. No Technological Barriers Exist to Real-Time, Automated Data Processing. Immediate Parametric Information Will Be the Expectation. Example: JMA Intensity Calc in SMA Firmware.

analu
Télécharger la présentation

CONSIDERATIONS FOR FUTURE SEISMIC SYSTEMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CONSIDERATIONS FOR FUTURE SEISMIC SYSTEMS Bob Nigbor USC

  2. No Technological Barriers Exist to Real-Time, Automated Data Processing

  3. Immediate Parametric Information Will Be the Expectation Example: JMA Intensity Calc in SMA Firmware The JMA Intensity Calculation uses a special FIR filter the matches the passband of the SHINDOF instrument exactly. K = 1.75 Slope of top of filter f0 = 0.5 Hz Cut off frequency of high pass filter Fc = 10 Hz Cut off frequency of low pass filter Wn = [1 - exp[(-Fn/f0)3]]1/2 * (K/Fn)1/2 * 1/ [1 + 0.694 * (Fn/Fc)2 + 0.241 * (Fn/Fc)4 + 0.0557 * (Fn/Fc)6 + 0.009664 * (Fn/Fc)8 + 0.00134 * (Fn/Fc)10 + 0.000155 * (Fn/Fc)12]1/2 Figure 1 IJMA Bandpass FIR Filter Equation The JMA Intensity is calculated from the KAWASUMI equation IJMA = 2 * log(acceleration) + 0.7

  4. Future SMA’s Will Be Powerful The 3x3” UCSD/HPWREN CerfCube, the basis of a new strong motion monitoring concept that runs a Linux operating system, consists of a high-performance Intel StrongARM 1110 processor with 32 MB RAM and 16 MB Flash.

  5. Structural Monitoring Systems Will Be Powerful

  6. What Instrumentation Do We Need to Enhance/Improve Strong Motion Data? • What improvements in SMA’s are needed to eliminate “corrections” and allow automated processing? • What (non-acceleration) sensors are needed to get us closer to our engineering information needs?

  7. DIVERSE SENSING FOR STRONG-MOTION Uni-axial Accelerometer Tri-axial Accelerometer Rotation Sensor Pressure Cell and Sensor Displacement Transducer

  8. How Can Seismic Data=Strong Motion Data? • What can be done to make the low-gain components of seismic network data acceptable to our engineering needs? • How can our engineering needs drive the low-gain components of ground motion networks?

  9. Primary Participants or Secondary Data Users? • Products: • Engineering products • Emergency response products • Public Products • Other Waveform data & metadata Seismic Monitoring

  10. A Star Trek Future? Captain Kirk: Computer, what are the parameters of that earthquake on the planet? Computer: I’m sorry Captain, I must get my PhD’s together to process the data and develop a consensus. Come back in a few days.

More Related