1 / 5

Ropes and Knots

9. Ropes and Knots. Introduction. Instructor Introduction Topic Introduction Class objectives References Preparation Step Information. Skill Drill 9-12 Tying a Bowline (1 of 3). 1. Make the desired sized loop and bring the working end back to the standing part.

annettef
Télécharger la présentation

Ropes and Knots

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 9 Ropes and Knots

  2. Introduction • Instructor Introduction • Topic Introduction • Class objectives • References • Preparation Step Information

  3. Skill Drill 9-12Tying a Bowline (1 of 3) 1. Make the desired sized loop and bring the working end back to the standing part. 2. Form another small loop in the standing part of the rope, with the section close to the working end on top.

  4. Skill Drill 9-12Tying a Bowline (2 of 3) 3. Pass the working end over the loop, around the standing part, and back through the same opening. 4. Tighten the knot by holding the working end and pulling the standard part of the rope backward.

  5. Skill Drill 9-12Tying a Bowline (3 of 3) 5. Tie a safety knot in the working end of the rope.

More Related