1 / 12

Previous Lecture 12

Previous Lecture 12. Voltage Dividers with Resistive loads . Lecture 13. SERIES-PARALLEL CIRCUITS. Ladder Networks . Lecture 13. The R/2R Ladder Network.

annona
Télécharger la présentation

Previous Lecture 12

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Previous Lecture 12 • Voltage Dividers with Resistive loads

  2. Lecture 13 SERIES-PARALLEL CIRCUITS • Ladder Networks

  3. Lecture 13 The R/2R Ladder Network A basic R/2R ladder network is shown in following Figure. The name comes from the relationship of the resistor values. R represents a common value, and one set of resistors has twice the value of the others. The R/2R ladder network is commonly used to scale down voltages to certain weighted values for digital-to-analog conversion.

  4. The switches used in this illustration simulate the digital (two-level) inputs. One switch position is connected to ground (0 V), and the other position is connected to a positive voltage (V).

  5. Analysis of R/2R Ladder NetworkSwitch SW4 is at the V position and the others are at ground

  6. Switch SW3 is at the V position and the others are at ground

  7. Switch SW2 is at the V position and the others are at ground

  8. Switch SW1 is at the V position and the others are at ground

More Related